From: Jan-Bernd Themann <ossthema@de.ibm.com>
To: netdev <netdev@vger.kernel.org>
Cc: Thomas Klein <tklein@de.ibm.com>,
Jan-Bernd Themann <themann@de.ibm.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-ppc <linuxppc-dev@ozlabs.org>,
Christoph Raisch <raisch@de.ibm.com>,
Marcus Eder <meder@de.ibm.com>
Subject: [2.6.19 PATCH 4/7] ehea: ethtool interface
Date: Wed, 23 Aug 2006 10:57:58 +0200 [thread overview]
Message-ID: <200608231057.58358.ossthema@de.ibm.com> (raw)
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
drivers/net/ehea/ehea_ethtool.c | 244 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 244 insertions(+)
--- linux-2.6.18-rc4-git1-orig/drivers/net/ehea/ehea_ethtool.c 1969-12-31 16:00:00.000000000 -0800
+++ kernel/drivers/net/ehea/ehea_ethtool.c 2006-08-23 02:01:00.363230269 -0700
@@ -0,0 +1,244 @@
+/*
+ * linux/drivers/net/ehea/ehea_ethtool.c
+ *
+ * eHEA ethernet device driver for IBM eServer System p
+ *
+ * (C) Copyright IBM Corp. 2006
+ *
+ * Authors:
+ * Christoph Raisch <raisch@de.ibm.com>
+ * Jan-Bernd Themann <themann@de.ibm.com>
+ * Thomas Klein <tklein@de.ibm.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "ehea.h"
+#include "ehea_phyp.h"
+
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ u64 hret;
+ struct ehea_port *port = netdev_priv(dev);
+ struct ehea_adapter *adapter = port->adapter;
+ struct hcp_ehea_port_cb4 *cb4;
+
+ cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ if (!cb4) {
+ ehea_error("no mem for cb4");
+ return -ENOMEM;
+ }
+
+ hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
+ H_PORT_CB4, H_PORT_CB4_ALL, cb4);
+ if (hret != H_SUCCESS) {
+ ehea_error("query_ehea_port failed");
+ kfree(cb4);
+ return -EIO;
+ }
+
+ if (netif_msg_hw(port))
+ ehea_dump(cb4, sizeof(*cb4), "netdev_get_settings");
+
+ if (netif_carrier_ok(dev)) {
+ switch(cb4->port_speed){
+ case H_PORT_SPEED_10M_H:
+ cmd->speed = SPEED_10;
+ cmd->duplex = DUPLEX_HALF;
+ break;
+ case H_PORT_SPEED_10M_F:
+ cmd->speed = SPEED_10;
+ cmd->duplex = DUPLEX_FULL;
+ break;
+ case H_PORT_SPEED_100M_H:
+ cmd->speed = SPEED_100;
+ cmd->duplex = DUPLEX_HALF;
+ break;
+ case H_PORT_SPEED_100M_F:
+ cmd->speed = SPEED_100;
+ cmd->duplex = DUPLEX_FULL;
+ break;
+ case H_PORT_SPEED_1G_F:
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ break;
+ case H_PORT_SPEED_10G_F:
+ cmd->speed = SPEED_10000;
+ cmd->duplex = DUPLEX_FULL;
+ break;
+ }
+ } else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
+ }
+
+ cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full
+ | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half
+ | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half
+ | SUPPORTED_Autoneg | SUPPORTED_FIBRE);
+
+ cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg
+ | ADVERTISED_FIBRE);
+
+ cmd->port = PORT_FIBRE;
+ cmd->autoneg = AUTONEG_ENABLE;
+
+ kfree(cb4);
+ return 0;
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver) - 1);
+ strlcpy(info->version, DRV_VERSION, sizeof(info->version) - 1);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ struct ehea_port *port = netdev_priv(dev);
+ return port->msg_enable;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+ struct ehea_port *port = netdev_priv(dev);
+ port->msg_enable = value;
+}
+
+static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = {
+ {"poll_max_processed"},
+ {"queue_stopped"},
+ {"min_swqe_avail"},
+ {"poll_receive_err"},
+ {"pkt_send"},
+ {"pkt_xmit"},
+ {"send_tasklet"},
+ {"ehea_poll"},
+ {"nwqe"},
+ {"swqe_available_0"},
+ {"sig_comp_iv"},
+ {"rxo"},
+ {"rx64"},
+ {"rx65"},
+ {"rx128"},
+ {"rx256"},
+ {"rx512"},
+ {"rx1024"},
+ {"txo"},
+ {"tx64"},
+ {"tx65"},
+ {"tx128"},
+ {"tx256"},
+ {"tx512"},
+ {"tx1024"},
+};
+
+static void netdev_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS) {
+ memcpy(data, &ehea_ethtool_stats_keys,
+ sizeof(ehea_ethtool_stats_keys));
+ }
+}
+
+static int netdev_get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(ehea_ethtool_stats_keys);
+}
+
+static void netdev_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ u64 hret;
+ int i;
+ struct ehea_port *port = netdev_priv(dev);
+ struct ehea_adapter *adapter = port->adapter;
+ struct ehea_port_res *pr = &port->port_res[0];
+ struct port_state *p_state = &pr->p_state;
+ struct hcp_ehea_port_cb6 *cb6;
+
+ for (i = 0; i < netdev_get_stats_count(dev); i++)
+ data[i] = 0;
+
+ i = 0;
+
+ data[i++] = p_state->poll_max_processed;
+ data[i++] = p_state->queue_stopped;
+ data[i++] = p_state->min_swqe_avail;
+ data[i++] = p_state->poll_receive_errors;
+ data[i++] = p_state->pkt_send;
+ data[i++] = p_state->pkt_xmit;
+ data[i++] = p_state->send_tasklet;
+ data[i++] = p_state->ehea_poll;
+ data[i++] = p_state->nwqe;
+ data[i++] = atomic_read(&port->port_res[0].swqe_avail);
+ data[i++] = port->sig_comp_iv;
+
+ cb6 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL);
+ if (!cb6) {
+ ehea_error("no mem for cb6");
+ return;
+ }
+
+ hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
+ H_PORT_CB6, H_PORT_CB6_ALL, cb6);
+ if (netif_msg_hw(port))
+ ehea_dump(cb6, sizeof(*cb6), "netdev_get_ethtool_stats");
+
+ if (hret == H_SUCCESS) {
+ data[i++] = cb6->rxo;
+ data[i++] = cb6->rx64;
+ data[i++] = cb6->rx65;
+ data[i++] = cb6->rx128;
+ data[i++] = cb6->rx256;
+ data[i++] = cb6->rx512;
+ data[i++] = cb6->rx1024;
+ data[i++] = cb6->txo;
+ data[i++] = cb6->tx64;
+ data[i++] = cb6->tx65;
+ data[i++] = cb6->tx128;
+ data[i++] = cb6->tx256;
+ data[i++] = cb6->tx512;
+ data[i++] = cb6->tx1024;
+ } else
+ ehea_error("query_ehea_port failed");
+
+ kfree(cb6);
+}
+
+struct ethtool_ops ehea_ethtool_ops = {
+ .get_settings = netdev_get_settings,
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+ .get_strings = netdev_get_strings,
+ .get_stats_count = netdev_get_stats_count,
+ .get_ethtool_stats = netdev_get_ethtool_stats,
+};
+
+void ehea_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &ehea_ethtool_ops);
+}
next reply other threads:[~2006-08-23 9:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-23 8:57 Jan-Bernd Themann [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-09-06 13:33 [2.6.19 PATCH 4/7] ehea: ethtool interface Jan-Bernd Themann
2006-09-04 10:40 Jan-Bernd Themann
2006-08-22 12:54 Jan-Bernd Themann
2006-08-18 11:33 Jan-Bernd Themann
2006-08-18 14:05 ` Alexey Dobriyan
2006-08-18 15:41 ` Thomas Klein
2006-08-18 17:45 ` Stephen Hemminger
2006-08-21 9:53 ` Thomas Klein
2006-08-19 6:18 ` Michael Ellerman
2006-08-19 6:48 ` Andy Gay
2006-08-19 8:41 ` Michael Ellerman
2006-08-19 13:47 ` Arnd Bergmann
2006-08-19 14:40 ` Jeff Garzik
2006-08-21 10:53 ` Thomas Klein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200608231057.58358.ossthema@de.ibm.com \
--to=ossthema@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=meder@de.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=raisch@de.ibm.com \
--cc=themann@de.ibm.com \
--cc=tklein@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).