* [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts
@ 2006-08-28 22:49 Kim Phillips
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Kim Phillips @ 2006-08-28 22:49 UTC (permalink / raw)
To: linuxppc-dev
Corrected PCI interrupt sense values to level low in mpc8349emds.dts, per Leo's recommendation.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
applies on top of "[PATCH 4/4] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts"
arch/powerpc/boot/dts/mpc8349emds.dts | 112 +++++++++++++++++----------------
1 files changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts
index 7e4508b..0643db9 100644
--- a/arch/powerpc/boot/dts/mpc8349emds.dts
+++ b/arch/powerpc/boot/dts/mpc8349emds.dts
@@ -178,46 +178,46 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 0
- 8800 0 0 2 700 15 0
- 8800 0 0 3 700 16 0
- 8800 0 0 4 700 17 0
+ 8800 0 0 1 700 14 2
+ 8800 0 0 2 700 15 2
+ 8800 0 0 3 700 16 2
+ 8800 0 0 4 700 17 2
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 0
- 9000 0 0 2 700 17 0
- 9000 0 0 3 700 14 0
- 9000 0 0 4 700 15 0
+ 9000 0 0 1 700 16 2
+ 9000 0 0 2 700 17 2
+ 9000 0 0 3 700 14 2
+ 9000 0 0 4 700 15 2
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 0
- 9800 0 0 2 700 14 0
- 9800 0 0 3 700 15 0
- 9800 0 0 4 700 16 0
+ 9800 0 0 1 700 17 2
+ 9800 0 0 2 700 14 2
+ 9800 0 0 3 700 15 2
+ 9800 0 0 4 700 16 2
/* IDSEL 0x15 */
- a800 0 0 1 700 14 0
- a800 0 0 2 700 15 0
- a800 0 0 3 700 16 0
- a800 0 0 4 700 17 0
+ a800 0 0 1 700 14 2
+ a800 0 0 2 700 15 2
+ a800 0 0 3 700 16 2
+ a800 0 0 4 700 17 2
/* IDSEL 0x16 */
- b000 0 0 1 700 17 0
- b000 0 0 2 700 14 0
- b000 0 0 3 700 15 0
- b000 0 0 4 700 16 0
+ b000 0 0 1 700 17 2
+ b000 0 0 2 700 14 2
+ b000 0 0 3 700 15 2
+ b000 0 0 4 700 16 2
/* IDSEL 0x17 */
- b800 0 0 1 700 16 0
- b800 0 0 2 700 17 0
- b800 0 0 3 700 14 0
- b800 0 0 4 700 15 0
+ b800 0 0 1 700 16 2
+ b800 0 0 2 700 17 2
+ b800 0 0 3 700 14 2
+ b800 0 0 4 700 15 2
/* IDSEL 0x18 */
- b000 0 0 1 700 15 0
- b000 0 0 2 700 16 0
- b000 0 0 3 700 17 0
- b000 0 0 4 700 14 0>;
+ b000 0 0 1 700 15 2
+ b000 0 0 2 700 16 2
+ b000 0 0 3 700 17 2
+ b000 0 0 4 700 14 2>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
@@ -238,46 +238,46 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 0
- 8800 0 0 2 700 15 0
- 8800 0 0 3 700 16 0
- 8800 0 0 4 700 17 0
+ 8800 0 0 1 700 14 2
+ 8800 0 0 2 700 15 2
+ 8800 0 0 3 700 16 2
+ 8800 0 0 4 700 17 2
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 0
- 9000 0 0 2 700 17 0
- 9000 0 0 3 700 14 0
- 9000 0 0 4 700 15 0
+ 9000 0 0 1 700 16 2
+ 9000 0 0 2 700 17 2
+ 9000 0 0 3 700 14 2
+ 9000 0 0 4 700 15 2
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 0
- 9800 0 0 2 700 14 0
- 9800 0 0 3 700 15 0
- 9800 0 0 4 700 16 0
+ 9800 0 0 1 700 17 2
+ 9800 0 0 2 700 14 2
+ 9800 0 0 3 700 15 2
+ 9800 0 0 4 700 16 2
/* IDSEL 0x15 */
- a800 0 0 1 700 14 0
- a800 0 0 2 700 15 0
- a800 0 0 3 700 16 0
- a800 0 0 4 700 17 0
+ a800 0 0 1 700 14 2
+ a800 0 0 2 700 15 2
+ a800 0 0 3 700 16 2
+ a800 0 0 4 700 17 2
/* IDSEL 0x16 */
- b000 0 0 1 700 17 0
- b000 0 0 2 700 14 0
- b000 0 0 3 700 15 0
- b000 0 0 4 700 16 0
+ b000 0 0 1 700 17 2
+ b000 0 0 2 700 14 2
+ b000 0 0 3 700 15 2
+ b000 0 0 4 700 16 2
/* IDSEL 0x17 */
- b800 0 0 1 700 16 0
- b800 0 0 2 700 17 0
- b800 0 0 3 700 14 0
- b800 0 0 4 700 15 0
+ b800 0 0 1 700 16 2
+ b800 0 0 2 700 17 2
+ b800 0 0 3 700 14 2
+ b800 0 0 4 700 15 2
/* IDSEL 0x18 */
- b000 0 0 1 700 15 0
- b000 0 0 2 700 16 0
- b000 0 0 3 700 17 0
- b000 0 0 4 700 14 0>;
+ b000 0 0 1 700 15 2
+ b000 0 0 2 700 16 2
+ b000 0 0 3 700 17 2
+ b000 0 0 4 700 14 2>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
--
1.4.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* RE: [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts
2006-08-28 22:49 [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Kim Phillips
@ 2006-08-29 2:32 ` Liu Dave-r63238
2006-08-30 13:29 ` Kumar Gala
2006-08-29 6:48 ` [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Paul Mackerras
2006-08-29 15:27 ` Sergei Shtylyov
2 siblings, 1 reply; 9+ messages in thread
From: Liu Dave-r63238 @ 2006-08-29 2:32 UTC (permalink / raw)
To: Phillips Kim-R1AAHA, linuxppc-dev
> Corrected PCI interrupt sense values to level low in=20
> mpc8349emds.dts, per Leo's recommendation.
>=20
> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
> ---
>=20
> applies on top of "[PATCH 4/4] Add MPC8349E MDS device tree=20
> source file to arch/powerpc/boot/dts"
>=20
>=20
> arch/powerpc/boot/dts/mpc8349emds.dts | 112=20
> +++++++++++++++++----------------
> 1 files changed, 56 insertions(+), 56 deletions(-)
>=20
> diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts=20
> b/arch/powerpc/boot/dts/mpc8349emds.dts
> index 7e4508b..0643db9 100644
> --- a/arch/powerpc/boot/dts/mpc8349emds.dts
> +++ b/arch/powerpc/boot/dts/mpc8349emds.dts
> @@ -178,46 +178,46 @@
> interrupt-map =3D <
> =20
> /* IDSEL 0x11 */
> - 8800 0 0 1 700 14 0
> - 8800 0 0 2 700 15 0
> - 8800 0 0 3 700 16 0
> - 8800 0 0 4 700 17 0
> + 8800 0 0 1 700 14 2
> + 8800 0 0 2 700 15 2
> + 8800 0 0 3 700 16 2
> + 8800 0 0 4 700 17 2
> =20
> /* IDSEL 0x12 */
> - 9000 0 0 1 700 16 0
> - 9000 0 0 2 700 17 0
> - 9000 0 0 3 700 14 0
> - 9000 0 0 4 700 15 0
> + 9000 0 0 1 700 16 2
> + 9000 0 0 2 700 17 2
> + 9000 0 0 3 700 14 2
> + 9000 0 0 4 700 15 2
> =20
> /* IDSEL 0x13 */
> - 9800 0 0 1 700 17 0
> - 9800 0 0 2 700 14 0
> - 9800 0 0 3 700 15 0
> - 9800 0 0 4 700 16 0
> + 9800 0 0 1 700 17 2
> + 9800 0 0 2 700 14 2
> + 9800 0 0 3 700 15 2
> + 9800 0 0 4 700 16 2
> =20
> /* IDSEL 0x15 */
> - a800 0 0 1 700 14 0
> - a800 0 0 2 700 15 0
> - a800 0 0 3 700 16 0
> - a800 0 0 4 700 17 0
> + a800 0 0 1 700 14 2
> + a800 0 0 2 700 15 2
> + a800 0 0 3 700 16 2
> + a800 0 0 4 700 17 2
> =20
> /* IDSEL 0x16 */
> - b000 0 0 1 700 17 0
> - b000 0 0 2 700 14 0
> - b000 0 0 3 700 15 0
> - b000 0 0 4 700 16 0
> + b000 0 0 1 700 17 2
> + b000 0 0 2 700 14 2
> + b000 0 0 3 700 15 2
> + b000 0 0 4 700 16 2
> =20
> /* IDSEL 0x17 */
> - b800 0 0 1 700 16 0
> - b800 0 0 2 700 17 0
> - b800 0 0 3 700 14 0
> - b800 0 0 4 700 15 0
> + b800 0 0 1 700 16 2
> + b800 0 0 2 700 17 2
> + b800 0 0 3 700 14 2
> + b800 0 0 4 700 15 2
> =20
> /* IDSEL 0x18 */
> - b000 0 0 1 700 15 0
> - b000 0 0 2 700 16 0
> - b000 0 0 3 700 17 0
> - b000 0 0 4 700 14 0>;
> + b000 0 0 1 700 15 2
> + b000 0 0 2 700 16 2
> + b000 0 0 3 700 17 2
> + b000 0 0 4 700 14 2>;
> interrupt-parent =3D <700>;
> interrupts =3D <42 8>;
> bus-range =3D <0 0>;
> @@ -238,46 +238,46 @@
> interrupt-map =3D <
> =20
> /* IDSEL 0x11 */
> - 8800 0 0 1 700 14 0
> - 8800 0 0 2 700 15 0
> - 8800 0 0 3 700 16 0
> - 8800 0 0 4 700 17 0
> + 8800 0 0 1 700 14 2
> + 8800 0 0 2 700 15 2
> + 8800 0 0 3 700 16 2
> + 8800 0 0 4 700 17 2
> =20
> /* IDSEL 0x12 */
> - 9000 0 0 1 700 16 0
> - 9000 0 0 2 700 17 0
> - 9000 0 0 3 700 14 0
> - 9000 0 0 4 700 15 0
> + 9000 0 0 1 700 16 2
> + 9000 0 0 2 700 17 2
> + 9000 0 0 3 700 14 2
> + 9000 0 0 4 700 15 2
> =20
> /* IDSEL 0x13 */
> - 9800 0 0 1 700 17 0
> - 9800 0 0 2 700 14 0
> - 9800 0 0 3 700 15 0
> - 9800 0 0 4 700 16 0
> + 9800 0 0 1 700 17 2
> + 9800 0 0 2 700 14 2
> + 9800 0 0 3 700 15 2
> + 9800 0 0 4 700 16 2
> =20
> /* IDSEL 0x15 */
> - a800 0 0 1 700 14 0
> - a800 0 0 2 700 15 0
> - a800 0 0 3 700 16 0
> - a800 0 0 4 700 17 0
> + a800 0 0 1 700 14 2
> + a800 0 0 2 700 15 2
> + a800 0 0 3 700 16 2
> + a800 0 0 4 700 17 2
> =20
> /* IDSEL 0x16 */
> - b000 0 0 1 700 17 0
> - b000 0 0 2 700 14 0
> - b000 0 0 3 700 15 0
> - b000 0 0 4 700 16 0
> + b000 0 0 1 700 17 2
> + b000 0 0 2 700 14 2
> + b000 0 0 3 700 15 2
> + b000 0 0 4 700 16 2
> =20
> /* IDSEL 0x17 */
> - b800 0 0 1 700 16 0
> - b800 0 0 2 700 17 0
> - b800 0 0 3 700 14 0
> - b800 0 0 4 700 15 0
> + b800 0 0 1 700 16 2
> + b800 0 0 2 700 17 2
> + b800 0 0 3 700 14 2
> + b800 0 0 4 700 15 2
> =20
> /* IDSEL 0x18 */
> - b000 0 0 1 700 15 0
> - b000 0 0 2 700 16 0
> - b000 0 0 3 700 17 0
> - b000 0 0 4 700 14 0>;
> + b000 0 0 1 700 15 2
> + b000 0 0 2 700 16 2
> + b000 0 0 3 700 17 2
> + b000 0 0 4 700 14 2>;
> interrupt-parent =3D <700>;
> interrupts =3D <42 8>;
> bus-range =3D <0 0>;
> --
> 1.4.1
Where these IDSEL 0x15~0x18 come from on 8349EMDS board?
Please expain it.
-DAve
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
@ 2006-08-30 13:29 ` Kumar Gala
2006-08-31 2:29 ` Liu Dave-r63238
0 siblings, 1 reply; 9+ messages in thread
From: Kumar Gala @ 2006-08-30 13:29 UTC (permalink / raw)
To: Liu Dave-r63238; +Cc: linuxppc-dev, Phillips Kim-R1AAHA
> Where these IDSEL 0x15~0x18 come from on 8349EMDS board?
> Please expain it.
This is from the docs on the PMC-PCI expansion boards that state what
IDSELs are used and how they are wired up.
- k
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts
2006-08-30 13:29 ` Kumar Gala
@ 2006-08-31 2:29 ` Liu Dave-r63238
2006-08-31 3:28 ` [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts Li Yang-r58472
0 siblings, 1 reply; 9+ messages in thread
From: Liu Dave-r63238 @ 2006-08-31 2:29 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, Phillips Kim-R1AAHA
<snip>
>=20
> > Where these IDSEL 0x15~0x18 come from on 8349EMDS board?
> > Please expain it.
>=20
> This is from the docs on the PMC-PCI expansion boards that=20
> state what IDSELs are used and how they are wired up.
Maybe you misunderstand me, I know that, the IDSEL is determined
by hardware design, I look up the schematic, only AD17/18/19 are
connected to PCI SLOT, that is IDSEL 0x11~0x13, I cannot find the
IDSEL 0x15~0x18 are impemented in the PIB. The IDSEL 0x15~0x18
actually are not existing.
-DAve
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts
2006-08-31 2:29 ` Liu Dave-r63238
@ 2006-08-31 3:28 ` Li Yang-r58472
2006-08-31 4:46 ` Liu Dave-r63238
0 siblings, 1 reply; 9+ messages in thread
From: Li Yang-r58472 @ 2006-08-31 3:28 UTC (permalink / raw)
To: Liu Dave-r63238, Kumar Gala; +Cc: linuxppc-dev, Phillips Kim-R1AAHA
> <snip>
> >=20
> > > Where these IDSEL 0x15~0x18 come from on 8349EMDS board?
> > > Please expain it.
> >=20
> > This is from the docs on the PMC-PCI expansion boards that=20
> state what=20
> > IDSELs are used and how they are wired up.
>=20
> Maybe you misunderstand me, I know that, the IDSEL is=20
> determined by hardware design, I look up the schematic, only=20
> AD17/18/19 are connected to PCI SLOT, that is IDSEL=20
> 0x11~0x13, I cannot find the IDSEL 0x15~0x18 are impemented=20
> in the PIB. The IDSEL 0x15~0x18 actually are not existing.
These IDSELs are used by PCI Expansion Adaptor Board which has 4 PCI
slots for PCI1.
- Leo
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts
2006-08-31 3:28 ` [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts Li Yang-r58472
@ 2006-08-31 4:46 ` Liu Dave-r63238
0 siblings, 0 replies; 9+ messages in thread
From: Liu Dave-r63238 @ 2006-08-31 4:46 UTC (permalink / raw)
To: Li Yang-r58472, Kumar Gala; +Cc: linuxppc-dev, Phillips Kim-R1AAHA
> >=20
> > Maybe you misunderstand me, I know that, the IDSEL is determined by=20
> > hardware design, I look up the schematic, only
> > AD17/18/19 are connected to PCI SLOT, that is IDSEL 0x11~0x13, I=20
> > cannot find the IDSEL 0x15~0x18 are impemented in the PIB.=20
> The IDSEL=20
> > 0x15~0x18 actually are not existing.
>=20
> These IDSELs are used by PCI Expansion Adaptor Board which=20
> has 4 PCI slots for PCI1.
Oh...The PCI expansion adaptor board. I see.
I have not ever seen the board.
-DAve
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts
2006-08-28 22:49 [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Kim Phillips
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
@ 2006-08-29 6:48 ` Paul Mackerras
2006-08-29 15:27 ` Sergei Shtylyov
2 siblings, 0 replies; 9+ messages in thread
From: Paul Mackerras @ 2006-08-29 6:48 UTC (permalink / raw)
To: Kim Phillips; +Cc: linuxppc-dev
Kim Phillips writes:
> Corrected PCI interrupt sense values to level low in
> mpc8349emds.dts, per Leo's recommendation.
Please send an amended version of your original patch.
Thanks,
Paul.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts
2006-08-28 22:49 [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Kim Phillips
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
2006-08-29 6:48 ` [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Paul Mackerras
@ 2006-08-29 15:27 ` Sergei Shtylyov
2006-08-29 15:35 ` Sergei Shtylyov
2 siblings, 1 reply; 9+ messages in thread
From: Sergei Shtylyov @ 2006-08-29 15:27 UTC (permalink / raw)
To: Kim Phillips; +Cc: linuxppc-dev
Hello.
Kim Phillips wrote:
> Corrected PCI interrupt sense values to level low in mpc8349emds.dts, per Leo's recommendation.
> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
> ---
> applies on top of "[PATCH 4/4] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts"
> arch/powerpc/boot/dts/mpc8349emds.dts | 112 +++++++++++++++++----------------
> 1 files changed, 56 insertions(+), 56 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts
> index 7e4508b..0643db9 100644
> --- a/arch/powerpc/boot/dts/mpc8349emds.dts
> +++ b/arch/powerpc/boot/dts/mpc8349emds.dts
> @@ -178,46 +178,46 @@
> interrupt-map = <
>
> /* IDSEL 0x11 */
> - 8800 0 0 1 700 14 0
> - 8800 0 0 2 700 15 0
> - 8800 0 0 3 700 16 0
> - 8800 0 0 4 700 17 0
> + 8800 0 0 1 700 14 2
> + 8800 0 0 2 700 15 2
> + 8800 0 0 3 700 16 2
> + 8800 0 0 4 700 17 2
Since when 2 means level low? 2 is level high, 1 is level low.
WBR, Sergei
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts
2006-08-29 15:27 ` Sergei Shtylyov
@ 2006-08-29 15:35 ` Sergei Shtylyov
0 siblings, 0 replies; 9+ messages in thread
From: Sergei Shtylyov @ 2006-08-29 15:35 UTC (permalink / raw)
To: Kim Phillips; +Cc: linuxppc-dev
Hello, I wrote:
>> Corrected PCI interrupt sense values to level low in mpc8349emds.dts,
>> per Leo's recommendation.
>> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
>> ---
>> applies on top of "[PATCH 4/4] Add MPC8349E MDS device tree source
>> file to arch/powerpc/boot/dts"
>> arch/powerpc/boot/dts/mpc8349emds.dts | 112
>> +++++++++++++++++----------------
>> 1 files changed, 56 insertions(+), 56 deletions(-)
>>
>> diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts
>> b/arch/powerpc/boot/dts/mpc8349emds.dts
>> index 7e4508b..0643db9 100644
>> --- a/arch/powerpc/boot/dts/mpc8349emds.dts
>> +++ b/arch/powerpc/boot/dts/mpc8349emds.dts
>> @@ -178,46 +178,46 @@
>> interrupt-map = <
>>
>> /* IDSEL 0x11 */
>> - 8800 0 0 1 700 14 0
>> - 8800 0 0 2 700 15 0
>> - 8800 0 0 3 700 16 0
>> - 8800 0 0 4 700 17 0
>> + 8800 0 0 1 700 14 2
>> + 8800 0 0 2 700 15 2
>> + 8800 0 0 3 700 16 2
>> + 8800 0 0 4 700 17 2
> Since when 2 means level low? 2 is level high, 1 is level low.
Ah, this board uses IPIC, not OpenPIC. Anyway, this contradicts your own
comment to the "ipic" device node stating that 8 is the right value for level low.
WBR, Sergei
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-08-31 4:46 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-28 22:49 [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Kim Phillips
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
2006-08-30 13:29 ` Kumar Gala
2006-08-31 2:29 ` Liu Dave-r63238
2006-08-31 3:28 ` [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts Li Yang-r58472
2006-08-31 4:46 ` Liu Dave-r63238
2006-08-29 6:48 ` [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Paul Mackerras
2006-08-29 15:27 ` Sergei Shtylyov
2006-08-29 15:35 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).