Hi!

When running a newer kernel on the MPC8349E-mITX development board, I do
the following changes to mpc834x_sys.c in order to get the PHY working:


diff -urN linux-2.6.17.4.orig/arch/ppc/platforms/83xx/mpc834x_sys.c linux-2.6.17.4/arch/ppc/platforms/83xx/mpc834x_sys.c
--- linux-2.6.17.4.orig/arch/ppc/platforms/83xx/mpc834x_sys.c	2006-07-06 22:02:28.000000000 +0200
+++ linux-2.6.17.4/arch/ppc/platforms/83xx/mpc834x_sys.c	2006-07-24 10:10:36.000000000 +0200
@@ -130,7 +130,7 @@
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
 		pdata->bus_id = 0;
-		pdata->phy_id = 0;
+		pdata->phy_id = 0x1c;
 		memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
 	}

@@ -138,7 +138,7 @@
 	if (pdata) {
 		pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
 		pdata->bus_id = 0;
-		pdata->phy_id = 1;
+		pdata->phy_id = 0x1f;
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}


Is this really the best way to do it, or would it be preferable to do it
some other way?

Cheers // Fredrik Roubert

-- 
Visserij 192  |  +32 473 344527 / +46 708 776974
BE-9000 Gent  |  http://www.df.lth.se/~roubert/