From: Stefan Roese <sr@denx.de>
To: linuxppc-embedded@ozlabs.org
Subject: Re: Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover
Date: Thu, 28 Sep 2006 21:28:05 +0200 [thread overview]
Message-ID: <200609282128.06350.sr@denx.de> (raw)
In-Reply-To: <137d01c6e288$844fcdd0$8119fea9@deltatau.local>
Hi Henry,
On Thursday 28 September 2006 00:58, Henry Bausley wrote:
> Uncompressing Kernel Image ... Error: inflate() returned -3
> GUNZIP ERROR - must RESET board to recover
> OK
>
> when u-boot tries to uncompress the kernel. I am using a board based upon
> a Yosemite AMCC 440EP.
> I do have some boards that work. Does anyone know what could cause this
> problem. Bad Flash , Bad DDR ?
I would suspect a DDR problem. Please (re-)check your DDR setup and
configuration.
BTW: This is the wrong mailinglist. You should post to the U-Boot list
instead.
Best regards,
Stefan
next prev parent reply other threads:[~2006-09-28 19:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-26 6:44 Asterisk on Embedded Linux Iwan Koenig
2006-09-26 7:21 ` Armin Schindler
2006-09-26 16:37 ` Eugene Surovegin
2006-09-26 17:37 ` Carlos Munoz
2006-09-27 16:01 ` Stelios Koroneos
2006-09-27 22:58 ` Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover Henry Bausley
2006-09-28 19:28 ` Stefan Roese [this message]
2007-08-06 4:16 ` Nethra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200609282128.06350.sr@denx.de \
--to=sr@denx.de \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).