From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from natblert.rzone.de (natblert.rzone.de [81.169.145.181]) by ozlabs.org (Postfix) with ESMTP id 6C83767B5F for ; Fri, 29 Sep 2006 05:26:50 +1000 (EST) From: Stefan Roese To: linuxppc-embedded@ozlabs.org Subject: Re: Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover Date: Thu, 28 Sep 2006 21:28:05 +0200 References: <137d01c6e288$844fcdd0$8119fea9@deltatau.local> In-Reply-To: <137d01c6e288$844fcdd0$8119fea9@deltatau.local> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200609282128.06350.sr@denx.de> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Henry, On Thursday 28 September 2006 00:58, Henry Bausley wrote: > Uncompressing Kernel Image ... Error: inflate() returned -3 > GUNZIP ERROR - must RESET board to recover > OK > > when u-boot tries to uncompress the kernel. I am using a board based upon > a Yosemite AMCC 440EP. > I do have some boards that work. Does anyone know what could cause this > problem. Bad Flash , Bad DDR ? I would suspect a DDR problem. Please (re-)check your DDR setup and configuration. BTW: This is the wrong mailinglist. You should post to the U-Boot list instead. Best regards, Stefan