From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by ozlabs.org (Postfix) with SMTP id BA5FB67C55 for ; Wed, 4 Oct 2006 19:04:26 +1000 (EST) Content-Type: text/plain; charset="iso-8859-1" Date: Wed, 04 Oct 2006 11:04:25 +0200 From: "Armin Steck" Message-ID: <20061004090425.57760@gmx.net> MIME-Version: 1.0 Subject: uboot-1.1.4 linux-2.6.10: Image bootproblems To: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, i have ported uboot1.1.4 for my board. When i would like to boot linux-kernel-2.6.10 the system hang after decompressing. can anybody help me? Flash: 0x00000000 uboot 0x00020000 ubootenvironment 0x00040000 kernel uImage uImage: gzip -9 < zImage > Image.gz /elinux/kernel2.6Richard/Richard/linux-2.6.10/scripts/mkuboot.sh -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n 'Linux-2.6.10' -d Image.gz uImage U-BOOT output: RAM Configuration: Bank #0: a0000000 32 MB Flash #0: 00000000 16 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1 uboot==> bootm 0x00040000 ## Booting image at 00040000 ... Image Name: Linux-2.6.10 Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 756009 Bytes = 738.3 kB Load Address: a0008000 Entry Point: a0008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Uncompressing Linux................................................... done, booting the kernel. 69052D06:0000001B:00001078 #Kernel-Debug-Information A00DC914-A0259594>A0008000 A0259594 -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer