From: Olof Johansson <olof@lixom.net>
To: paulus@samba.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] powerpc: Enable DEEPNAP power savings mode on 970MP
Date: Wed, 4 Oct 2006 23:41:41 -0500 [thread overview]
Message-ID: <20061004234141.749b13fb@localhost.localdomain> (raw)
Hi,
Without this patch, on an idle system I get:
cpu-power-0:21.638
cpu-power-1:27.102
cpu-power-2:29.343
cpu-power-3:25.784
Total: 103.8W
With this patch:
cpu-power-0:11.730
cpu-power-1:17.185
cpu-power-2:18.547
cpu-power-3:17.528
Total: 65.0W
If I lower HZ to 100, I can get it as low as:
cpu-power-0:10.938
cpu-power-1:16.021
cpu-power-2:17.245
cpu-power-3:16.145
Total: 60.2W
Another (older) Quad G5 went from 54W to 39W at HZ=250.
Coming back out of Deep Nap takes 40-70 cycles longer than coming back
from just Nap (which already takes quite a while). I don't think it'll
be a performance issue (interrupt latency on an idle system), but in
case someone does measurements feel free to report them.
Signed-off-by: Olof Johansson <olof@lixom.net>
Index: linux-2.6/arch/powerpc/kernel/cpu_setup_ppc970.S
===================================================================
--- linux-2.6.orig/arch/powerpc/kernel/cpu_setup_ppc970.S
+++ linux-2.6/arch/powerpc/kernel/cpu_setup_ppc970.S
@@ -83,6 +83,22 @@ _GLOBAL(__setup_cpu_ppc970)
rldimi r0,r11,52,8 /* set NAP and DPM */
li r11,0
rldimi r0,r11,32,31 /* clear EN_ATTN */
+ b load_hids /* Jump to shared code */
+
+
+_GLOBAL(__setup_cpu_ppc970MP)
+ /* Do nothing if not running in HV mode */
+ mfmsr r0
+ rldicl. r0,r0,4,63
+ beqlr
+
+ mfspr r0,SPRN_HID0
+ li r11,0x15 /* clear DOZE and SLEEP */
+ rldimi r0,r11,52,6 /* set DEEPNAP, NAP and DPM */
+ li r11,0
+ rldimi r0,r11,32,31 /* clear EN_ATTN */
+
+load_hids:
mtspr SPRN_HID0,r0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
Index: linux-2.6/arch/powerpc/kernel/cputable.c
===================================================================
--- linux-2.6.orig/arch/powerpc/kernel/cputable.c
+++ linux-2.6/arch/powerpc/kernel/cputable.c
@@ -41,6 +41,7 @@ extern void __setup_cpu_745x(unsigned lo
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_ppc970(void);
#endif /* CONFIG_PPC64 */
@@ -221,7 +222,7 @@ struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
- .cpu_setup = __setup_cpu_ppc970,
+ .cpu_setup = __setup_cpu_ppc970MP,
.cpu_restore = __restore_cpu_ppc970,
.oprofile_cpu_type = "ppc64/970",
.oprofile_type = PPC_OPROFILE_POWER4,
next reply other threads:[~2006-10-05 4:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-05 4:41 Olof Johansson [this message]
2006-10-05 5:34 ` [PATCH] powerpc: Enable DEEPNAP power savings mode on 970MP Benjamin Herrenschmidt
2006-10-05 14:21 ` Olof Johansson
2006-10-05 19:25 ` Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061004234141.749b13fb@localhost.localdomain \
--to=olof@lixom.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).