Re: booting 2.6 kernel on ML403

[Pradeep Sampath <pradeepsampath@yahoo.com>]

[-- Attachment #1: Type: text/plain, Size: 1698 bytes --]

Hi Ameet,
   
  As soon as i apply the sysace driver and temac drivers and copy the xparameters_ml300.h (from EDK) to xparameters_ml403.h all i get is this... meaning kernel hangs after displaying "Now booting the kernel".
   
  When i disable sysace and TEMAC drivers, the system goes further till "root=" option and then tries to "Kernel Rebooting in 180 seconds". Yesterday i tried root=/dev/xsysace2 rw and creating block device files in /dev of the CF card. But it ran into the same problem.Is there a sysace driver patch that i can apply without applying the TEMAC driver patch? 
   
  So far i was using the EDK 8.1 SP2 (latest) which has the IP core TEMAC version 3.00. Now i downgraded to EDK 8.1 to get the version 2.00 (please see John Bonesio's post). 
   
  I thought the first step is to get the sysace driver running before applying the TEMAC drivers.

  thanks very much!
  Pradeep

Ameet Patil <ammubhai@gmail.com> wrote:
  Pradeep,
What you have pasted is only part of the messages displayed. I can't 
tell anything from this apart from you 'root=' option. It would be nice 
if you could paste the entire log of the boot messages right from 
'loaded at: xxxxxxx xxxxxxxx' to 'Kernel Rebooting in 150 seconds'.

-Ameet

Pradeep Sampath wrote:
> Ameet,
> 
> loaded at: 00400000 0051513C
> board data at: 00513124 0051313C
> relocated to: 004050E8 00405100
> zimage at: 004057FD 0051230A
> avail ram: 00516000 04000000
> Linux/PPC load: console=ttyS0,9600 root=/dev/xsa2
> Uncompressing Linux...done.
> Now booting the kernel
>
>
> Please could send me all the boot messages until the point where it
> stops. This will help me better identify the problem.
>
> Thanks,
> -Ameet
>
>



[-- Attachment #2: Type: text/html, Size: 2150 bytes --]