From: Olof Johansson <olof@lixom.net>
To: Linus Torvalds <torvalds@osdl.org>
Cc: Andrew Morton <akpm@osdl.org>,
linux-arch@vger.kernel.org, arnd@arndb.de,
linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulus@samba.org
Subject: [PATCH] powerpc: irq change build breaks
Date: Thu, 5 Oct 2006 20:31:10 -0500 [thread overview]
Message-ID: <20061005203110.4c3022ce@localhost.localdomain> (raw)
In-Reply-To: <Pine.LNX.4.64.0610051632250.3952@g5.osdl.org>
Fix up some of the buildbreaks from the irq handler changes.
Signed-off-by: Olof Johansson <olof@lixom.net>
---
On Thu, 5 Oct 2006 16:35:02 -0700 (PDT) Linus Torvalds <torvalds@osdl.org> wrote:
> Any fall-out from this should be both obvious and pretty trivial to fix
> up.
>
Here's a pass of fixes from building all defconfigs under arch/powerpc
+ grep of generic_handle_irq callers.
arch/powerpc/platforms/85xx/mpc85xx_ads.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 2 +-
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 +-
arch/powerpc/platforms/cell/interrupt.c | 2 +-
arch/powerpc/platforms/chrp/setup.c | 2 +-
arch/powerpc/platforms/powermac/pic.c | 2 +-
arch/powerpc/sysdev/qe_lib/qe_ic.c | 4 ++--
arch/powerpc/sysdev/tsi108_pci.c | 2 +-
drivers/macintosh/via-cuda.c | 2 +-
sound/oss/dmasound/dmasound_awacs.c | 4 ++--
10 files changed, 12 insertions(+), 12 deletions(-)
Index: linux-2.6/arch/powerpc/platforms/85xx/mpc85xx_ads.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ linux-2.6/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -72,7 +72,7 @@ static void cpm2_cascade(unsigned int ir
int cascade_irq;
while ((cascade_irq = cpm2_get_irq(regs)) >= 0) {
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
}
desc->chip->eoi(irq);
}
Index: linux-2.6/arch/powerpc/platforms/85xx/mpc85xx_cds.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ linux-2.6/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -138,7 +138,7 @@ static void mpc85xx_8259_cascade(unsigne
unsigned int cascade_irq = i8259_irq(regs);
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
Index: linux-2.6/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ linux-2.6/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -58,7 +58,7 @@ static void mpc86xx_8259_cascade(unsigne
{
unsigned int cascade_irq = i8259_irq(regs);
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
#endif /* CONFIG_PCI */
Index: linux-2.6/arch/powerpc/platforms/cell/interrupt.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/cell/interrupt.c
+++ linux-2.6/arch/powerpc/platforms/cell/interrupt.c
@@ -121,7 +121,7 @@ static void iic_ioexc_cascade(unsigned i
irq_linear_revmap(iic_host,
base | cascade);
if (cirq != NO_IRQ)
- generic_handle_irq(cirq, regs);
+ generic_handle_irq(cirq);
}
/* post-ack level interrupts */
ack = bits & ~IIC_ISR_EDGE_MASK;
Index: linux-2.6/arch/powerpc/platforms/chrp/setup.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/chrp/setup.c
+++ linux-2.6/arch/powerpc/platforms/chrp/setup.c
@@ -340,7 +340,7 @@ static void chrp_8259_cascade(unsigned i
{
unsigned int cascade_irq = i8259_irq(regs);
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
Index: linux-2.6/arch/powerpc/sysdev/qe_lib/qe_ic.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ linux-2.6/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -343,7 +343,7 @@ void fastcall qe_ic_cascade_low(unsigned
chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
chip->unmask(irq);
}
@@ -359,7 +359,7 @@ void fastcall qe_ic_cascade_high(unsigne
chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
chip->unmask(irq);
}
Index: linux-2.6/arch/powerpc/sysdev/tsi108_pci.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/tsi108_pci.c
+++ linux-2.6/arch/powerpc/sysdev/tsi108_pci.c
@@ -410,6 +410,6 @@ void tsi108_irq_cascade(unsigned int irq
{
unsigned int cascade_irq = get_pci_source();
if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq, regs);
+ generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
Index: linux-2.6/arch/powerpc/platforms/powermac/pic.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/powermac/pic.c
+++ linux-2.6/arch/powerpc/platforms/powermac/pic.c
@@ -227,7 +227,7 @@ static irqreturn_t gatwick_action(int cp
continue;
irq += __ilog2(bits);
spin_unlock_irqrestore(&pmac_pic_lock, flags);
- __do_IRQ(irq, regs);
+ __do_IRQ(irq);
spin_lock_irqsave(&pmac_pic_lock, flags);
rc = IRQ_HANDLED;
}
Index: linux-2.6/drivers/macintosh/via-cuda.c
===================================================================
--- linux-2.6.orig/drivers/macintosh/via-cuda.c
+++ linux-2.6/drivers/macintosh/via-cuda.c
@@ -437,7 +437,7 @@ cuda_poll(void)
* disable_irq(), would that work on m68k ? --BenH
*/
local_irq_save(flags);
- cuda_interrupt(0, NULL, NULL);
+ cuda_interrupt(0, NULL);
local_irq_restore(flags);
}
Index: linux-2.6/sound/oss/dmasound/dmasound_awacs.c
===================================================================
--- linux-2.6.orig/sound/oss/dmasound/dmasound_awacs.c
+++ linux-2.6/sound/oss/dmasound/dmasound_awacs.c
@@ -465,7 +465,7 @@ tas_dmasound_init(void)
val = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_headphone_detect, 0);
pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_headphone_detect, val | 0x80);
/* Trigger it */
- headphone_intr(0,NULL,NULL);
+ headphone_intr(0, NULL);
}
}
if (!gpio_headphone_irq) {
@@ -1499,7 +1499,7 @@ static int awacs_sleep_notify(struct pmu
write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
msleep(150);
tas_leave_sleep(); /* Stub for now */
- headphone_intr(0,NULL,NULL);
+ headphone_intr(0, NULL);
break;
case AWACS_DACA:
msleep(10); /* Check this !!! */
next parent reply other threads:[~2006-10-06 1:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20061002132116.2663d7a3.akpm@osdl.org>
[not found] ` <20061002162049.17763.39576.stgit@warthog.cambridge.redhat.com>
[not found] ` <20061002162053.17763.26032.stgit@warthog.cambridge.redhat.com>
[not found] ` <18975.1160058127@warthog.cambridge.redhat.com>
[not found] ` <Pine.LNX.4.64.0610051632250.3952@g5.osdl.org>
2006-10-06 1:31 ` Olof Johansson [this message]
2006-10-06 4:22 ` [PATCH] powerpc: irq change build breaks Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061005203110.4c3022ce@localhost.localdomain \
--to=olof@lixom.net \
--cc=akpm@osdl.org \
--cc=arnd@arndb.de \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).