* Xubuntu and Xenomai on the Lite5200 (IceCube)...
@ 2006-10-30 11:09 David Jander
2006-10-30 15:32 ` AW: " Achim Machura
2006-10-30 17:58 ` Grant Likely
0 siblings, 2 replies; 6+ messages in thread
From: David Jander @ 2006-10-30 11:09 UTC (permalink / raw)
To: linuxppc-embedded list
Hi all,
I got the task to help make Linux run on the IceCube, with support for MSCAN,
FEC and USB. After a rather exciting jurney I managed to get kernel 2.6.18
working with bestcomm DMA and FEC support backported from DENX's git
2.6.19-rcsomething, and Xenomai installed upon that.
Btw, before Wolfgang Denk starts complaining why I didn't use his 2.4 kernel,
it's because I wasn't smart enough to get USB working. If it does work,
please tell me how, I just get errors when plugging in a USB device "kernel:
usb.c: USB device not accepting new address=2 (error=-110)".
This seems to work fine in 2.6, though.
It was not easy, so I wrote everything down (I hope I didn't forget anything
important):
http://yopesblog.blogspot.com/2006/10/how-to-run-ubuntu-and-xenomai-on.html
If anyone wants to tell me what I did wrong (probably a lot), please tell me.
I am posting this to the list hoping someone else will benefit from it. I
certainly would have.
Greetings,
--
David Jander
^ permalink raw reply [flat|nested] 6+ messages in thread
* AW: Xubuntu and Xenomai on the Lite5200 (IceCube)...
2006-10-30 11:09 Xubuntu and Xenomai on the Lite5200 (IceCube) David Jander
@ 2006-10-30 15:32 ` Achim Machura
2006-10-30 16:10 ` David Jander
2006-10-30 17:58 ` Grant Likely
1 sibling, 1 reply; 6+ messages in thread
From: Achim Machura @ 2006-10-30 15:32 UTC (permalink / raw)
To: 'David Jander'; +Cc: Linuxppc-Embedded (E-Mail)
Hello, David,
We have had the same problem,
after enabling pci in the kernelconfig,
usb is working.
best regards
Achim
> -----Ursprungliche Nachricht-----
> Von: linuxppc-embedded-bounces+machura=berghof.com@ozlabs.org
> [mailto:linuxppc-embedded-bounces+machura=berghof.com@ozlabs.org]Im
> Auftrag von David Jander
> Gesendet: Montag, 30. Oktober 2006 12:10
> An: linuxppc-embedded list
> Betreff: Xubuntu and Xenomai on the Lite5200 (IceCube)...
>
>
>
> Hi all,
>
> I got the task to help make Linux run on the IceCube, with
> support for MSCAN,
> FEC and USB. After a rather exciting jurney I managed to get
> kernel 2.6.18
> working with bestcomm DMA and FEC support backported from DENX's git
> 2.6.19-rcsomething, and Xenomai installed upon that.
> Btw, before Wolfgang Denk starts complaining why I didn't use
> his 2.4 kernel,
> it's because I wasn't smart enough to get USB working. If it
> does work,
> please tell me how, I just get errors when plugging in a USB
> device "kernel:
> usb.c: USB device not accepting new address=2 (error=-110)".
> This seems to work fine in 2.6, though.
> It was not easy, so I wrote everything down (I hope I didn't
> forget anything
> important):
>
> http://yopesblog.blogspot.com/2006/10/how-to-run-ubuntu-and-xe
nomai-on.html
If anyone wants to tell me what I did wrong (probably a lot), please tell
me.
I am posting this to the list hoping someone else will benefit from it. I
certainly would have.
Greetings,
--
David Jander
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: AW: Xubuntu and Xenomai on the Lite5200 (IceCube)...
2006-10-30 15:32 ` AW: " Achim Machura
@ 2006-10-30 16:10 ` David Jander
2006-10-30 22:41 ` Wolfgang Denk
0 siblings, 1 reply; 6+ messages in thread
From: David Jander @ 2006-10-30 16:10 UTC (permalink / raw)
To: linuxppc-embedded, achim.machura
On Monday 30 October 2006 16:32, Achim Machura wrote:
> Hello, David,
>
> We have had the same problem,
>
> after enabling pci in the kernelconfig,
> usb is working.
Duh. And how is one supposed to know that?
Thanks for the tip ;-)
Greetings,
--
David Jander
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: AW: Xubuntu and Xenomai on the Lite5200 (IceCube)...
2006-10-30 16:10 ` David Jander
@ 2006-10-30 22:41 ` Wolfgang Denk
0 siblings, 0 replies; 6+ messages in thread
From: Wolfgang Denk @ 2006-10-30 22:41 UTC (permalink / raw)
To: David Jander; +Cc: achim.machura, linuxppc-embedded
In message <200610301710.03626.david.jander@protonic.nl> you wrote:
>
> > after enabling pci in the kernelconfig,
> > usb is working.
>
> Duh. And how is one supposed to know that?
You aren't. I consider this a bug, too. Actually, this is supposed to
be fixed in the current tree.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"The greatest warriors are the ones who fight for peace."
- Holly Near
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Xubuntu and Xenomai on the Lite5200 (IceCube)...
2006-10-30 11:09 Xubuntu and Xenomai on the Lite5200 (IceCube) David Jander
2006-10-30 15:32 ` AW: " Achim Machura
@ 2006-10-30 17:58 ` Grant Likely
2006-10-31 7:54 ` David Jander
1 sibling, 1 reply; 6+ messages in thread
From: Grant Likely @ 2006-10-30 17:58 UTC (permalink / raw)
To: David Jander; +Cc: linuxppc-embedded list
On 10/30/06, David Jander <david.jander@protonic.nl> wrote:
>
> Hi all,
>
> I got the task to help make Linux run on the IceCube, with support for MSCAN,
> FEC and USB. After a rather exciting jurney I managed to get kernel 2.6.18
> working with bestcomm DMA and FEC support backported from DENX's git
> 2.6.19-rcsomething, and Xenomai installed upon that.
> Btw, before Wolfgang Denk starts complaining why I didn't use his 2.4 kernel,
> it's because I wasn't smart enough to get USB working. If it does work,
> please tell me how, I just get errors when plugging in a USB device "kernel:
> usb.c: USB device not accepting new address=2 (error=-110)".
> This seems to work fine in 2.6, though.
> It was not easy, so I wrote everything down (I hope I didn't forget anything
> important):
>
> http://yopesblog.blogspot.com/2006/10/how-to-run-ubuntu-and-xenomai-on.html
Congratulations, that's good work! Especially the bit about
documenting what you did! I've been meaning to play w/ xenomai for a
while now.
Care to help with the port to arch/powerpc now? :P
g.
--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Xubuntu and Xenomai on the Lite5200 (IceCube)...
2006-10-30 17:58 ` Grant Likely
@ 2006-10-31 7:54 ` David Jander
0 siblings, 0 replies; 6+ messages in thread
From: David Jander @ 2006-10-31 7:54 UTC (permalink / raw)
To: linuxppc-embedded
On Monday 30 October 2006 18:58, Grant Likely wrote:
>[...]
>>
> Congratulations, that's good work! Especially the bit about
> documenting what you did! I've been meaning to play w/ xenomai for a
> while now.
Thanks. I hope this makes searching-time shorter for you.
I wish I could remember more details about what I exactly changed to make the
kernel compile after backporting bestcomm and FEC... I vaguely remember
adding "#include <platform_device.h>" to at least two files...
> Care to help with the port to arch/powerpc now? :P
I would really like to, but I have very limited time to dedicate to such
things. If I get the chance to do something about it, I'll do it, I promise.
The time will come when I'll have to port our own board-support stuff to
arch/powerpc... so...
Greetings,
--
David Jander
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-10-31 7:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-30 11:09 Xubuntu and Xenomai on the Lite5200 (IceCube) David Jander
2006-10-30 15:32 ` AW: " Achim Machura
2006-10-30 16:10 ` David Jander
2006-10-30 22:41 ` Wolfgang Denk
2006-10-30 17:58 ` Grant Likely
2006-10-31 7:54 ` David Jander
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).