Kernel 2.6.18 and JFFS2 Filesystem problem

Kernel 2.6.18 and JFFS2 Filesystem problem

[mvw]

Hello,

i dont know what my mistake.
What files do i need for a filesystem?
Is it correct to build the filesystem with these parameters?
--> mkfs.jffs2 -r dir -o jffs2 -e 0x40000 -p

-------------------------------------------------------------------------
Probing MTD map driver for board flash at physical address 0x0(16-bit bank)
MTD map driver for board: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Using default (built-in) partition definition
Creating 4 MTD partitions on "MTD map driver for board":
0x00000000-0x00020000 : "uboot"
0x00020000-0x00040000 : "environment"
0x00040000-0x00140000 : "kernel"
0x00140000-0x00f40000 : "jffs2"
mice: PS/2 mouse device common for all mice
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 60K
(nothing is displayed)
--------------------------------------------------------------------------

Thank you for your help.

armin
-- 
GMX DSL-Flatrate 0,- Euro* - Überall, wo DSL verfügbar ist!
NEU: Jetzt bis zu 16.000 kBit/s! http://www.gmx.net/de/go/dsl

Re: Kernel 2.6.18 and JFFS2 Filesystem problem

[Wolfgang Denk]

In message <20061106133041.94740@gmx.net> you wrote:
> 
> i dont know what my mistake.

We don';t know either - not from such a vague message.

> What files do i need for a filesystem?

See for example
http://www.denx.de/wiki/view/DULG/RootFileSystemDesignAndBuilding

> Is it correct to build the filesystem with these parameters?
> --> mkfs.jffs2 -r dir -o jffs2 -e 0x40000 -p

This might be OK, but we don't know your hardware.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"How is this place run - is it an anarchy?"
"No, I wouldn't say so; it is not that well organised..."