* [POWERPC] iSeries: fix slb.c for combined build
@ 2006-11-13 3:49 Stephen Rothwell
2006-11-13 7:03 ` Olof Johansson
0 siblings, 1 reply; 4+ messages in thread
From: Stephen Rothwell @ 2006-11-13 3:49 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/mm/slb.c | 39 +++++++++++++++++++--------------------
1 files changed, 19 insertions(+), 20 deletions(-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index d373391..06c0055 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -23,6 +23,7 @@
#include <asm/cputable.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
+#include <asm/firmware.h>
#include <linux/compiler.h>
#ifdef DEBUG
@@ -227,28 +228,26 @@ void slb_initialize(void)
/* On iSeries the bolted entries have already been set up by
* the hypervisor from the lparMap data in head.S */
-#ifndef CONFIG_PPC_ISERIES
- {
- unsigned long lflags, vflags;
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ unsigned long lflags, vflags;
- lflags = SLB_VSID_KERNEL | linear_llp;
- vflags = SLB_VSID_KERNEL | vmalloc_llp;
+ lflags = SLB_VSID_KERNEL | linear_llp;
+ vflags = SLB_VSID_KERNEL | vmalloc_llp;
+
+ /* Invalidate the entire SLB (even slot 0) & all the ERATS */
+ asm volatile("isync":::"memory");
+ asm volatile("slbmte %0,%0"::"r" (0) : "memory");
+ asm volatile("isync; slbia; isync":::"memory");
+ create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
- /* Invalidate the entire SLB (even slot 0) & all the ERATS */
- asm volatile("isync":::"memory");
- asm volatile("slbmte %0,%0"::"r" (0) : "memory");
- asm volatile("isync; slbia; isync":::"memory");
- create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
-
- create_shadowed_slbe(VMALLOC_START, vflags, 1);
-
- /* We don't bolt the stack for the time being - we're in boot,
- * so the stack is in the bolted segment. By the time it goes
- * elsewhere, we'll call _switch() which will bolt in the new
- * one. */
- asm volatile("isync":::"memory");
- }
-#endif /* CONFIG_PPC_ISERIES */
+ create_shadowed_slbe(VMALLOC_START, vflags, 1);
+
+ /* We don't bolt the stack for the time being - we're in boot,
+ * so the stack is in the bolted segment. By the time it goes
+ * elsewhere, we'll call _switch() which will bolt in the new
+ * one. */
+ asm volatile("isync":::"memory");
+ }
get_paca()->stab_rr = SLB_NUM_BOLTED;
}
--
1.4.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [POWERPC] iSeries: fix slb.c for combined build
2006-11-13 3:49 [POWERPC] iSeries: fix slb.c for combined build Stephen Rothwell
@ 2006-11-13 7:03 ` Olof Johansson
2006-11-14 1:57 ` Stephen Rothwell
0 siblings, 1 reply; 4+ messages in thread
From: Olof Johansson @ 2006-11-13 7:03 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: ppc-dev, paulus
On Mon, 13 Nov 2006 14:49:18 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> -#ifndef CONFIG_PPC_ISERIES
> - {
> - unsigned long lflags, vflags;
> + if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
> + unsigned long lflags, vflags;
>
> - lflags = SLB_VSID_KERNEL | linear_llp;
It'll be a little tidier if you move the stab_rr setting (common code
at the bottom of the function) up above the test, and just return early
for iseries, instead of indenting everything an extra level.
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
* [POWERPC] iSeries: fix slb.c for combined build
2006-11-13 7:03 ` Olof Johansson
@ 2006-11-14 1:57 ` Stephen Rothwell
2006-11-14 2:03 ` Michael Ellerman
0 siblings, 1 reply; 4+ messages in thread
From: Stephen Rothwell @ 2006-11-14 1:57 UTC (permalink / raw)
To: paulus; +Cc: Olof Johansson, ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/mm/slb.c | 13 ++++++-------
1 files changed, 6 insertions(+), 7 deletions(-)
This version takes into account Olof's comment.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index d373391..224e960 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -23,6 +23,7 @@
#include <asm/cputable.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
+#include <asm/firmware.h>
#include <linux/compiler.h>
#ifdef DEBUG
@@ -193,6 +194,7 @@ static inline void patch_slb_encoding(un
void slb_initialize(void)
{
unsigned long linear_llp, vmalloc_llp, io_llp;
+ unsigned long lflags, vflags;
static int slb_encoding_inited;
extern unsigned int *slb_miss_kernel_load_linear;
extern unsigned int *slb_miss_kernel_load_io;
@@ -225,11 +227,12 @@ void slb_initialize(void)
#endif
}
+ get_paca()->stab_rr = SLB_NUM_BOLTED;
+
/* On iSeries the bolted entries have already been set up by
* the hypervisor from the lparMap data in head.S */
-#ifndef CONFIG_PPC_ISERIES
- {
- unsigned long lflags, vflags;
+ if (firmware_has_feature(FW_FEATURE_ISERIES))
+ return;
lflags = SLB_VSID_KERNEL | linear_llp;
vflags = SLB_VSID_KERNEL | vmalloc_llp;
@@ -247,8 +250,4 @@ void slb_initialize(void)
* elsewhere, we'll call _switch() which will bolt in the new
* one. */
asm volatile("isync":::"memory");
- }
-#endif /* CONFIG_PPC_ISERIES */
-
- get_paca()->stab_rr = SLB_NUM_BOLTED;
}
--
1.4.3.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [POWERPC] iSeries: fix slb.c for combined build
2006-11-14 1:57 ` Stephen Rothwell
@ 2006-11-14 2:03 ` Michael Ellerman
0 siblings, 0 replies; 4+ messages in thread
From: Michael Ellerman @ 2006-11-14 2:03 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Olof Johansson, ppc-dev, paulus
[-- Attachment #1: Type: text/plain, Size: 2167 bytes --]
On Tue, 2006-11-14 at 12:57 +1100, Stephen Rothwell wrote:
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> arch/powerpc/mm/slb.c | 13 ++++++-------
> 1 files changed, 6 insertions(+), 7 deletions(-)
>
> This version takes into account Olof's comment.
It's not clear from that patch that you haven't altered the logic for !
ISERIES, but I'll take your word for it ;)
cheers
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
> index d373391..224e960 100644
> --- a/arch/powerpc/mm/slb.c
> +++ b/arch/powerpc/mm/slb.c
> @@ -23,6 +23,7 @@
> #include <asm/cputable.h>
> #include <asm/cacheflush.h>
> #include <asm/smp.h>
> +#include <asm/firmware.h>
> #include <linux/compiler.h>
>
> #ifdef DEBUG
> @@ -193,6 +194,7 @@ static inline void patch_slb_encoding(un
> void slb_initialize(void)
> {
> unsigned long linear_llp, vmalloc_llp, io_llp;
> + unsigned long lflags, vflags;
> static int slb_encoding_inited;
> extern unsigned int *slb_miss_kernel_load_linear;
> extern unsigned int *slb_miss_kernel_load_io;
> @@ -225,11 +227,12 @@ void slb_initialize(void)
> #endif
> }
>
> + get_paca()->stab_rr = SLB_NUM_BOLTED;
> +
> /* On iSeries the bolted entries have already been set up by
> * the hypervisor from the lparMap data in head.S */
> -#ifndef CONFIG_PPC_ISERIES
> - {
> - unsigned long lflags, vflags;
> + if (firmware_has_feature(FW_FEATURE_ISERIES))
> + return;
>
> lflags = SLB_VSID_KERNEL | linear_llp;
> vflags = SLB_VSID_KERNEL | vmalloc_llp;
> @@ -247,8 +250,4 @@ void slb_initialize(void)
> * elsewhere, we'll call _switch() which will bolt in the new
> * one. */
> asm volatile("isync":::"memory");
> - }
> -#endif /* CONFIG_PPC_ISERIES */
> -
> - get_paca()->stab_rr = SLB_NUM_BOLTED;
> }
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-11-14 2:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-13 3:49 [POWERPC] iSeries: fix slb.c for combined build Stephen Rothwell
2006-11-13 7:03 ` Olof Johansson
2006-11-14 1:57 ` Stephen Rothwell
2006-11-14 2:03 ` Michael Ellerman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).