From: linas@austin.ibm.com (Linas Vepstas)
To: Andrew Morton <akpm@osdl.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, James K Lewis <jklewis@us.ibm.com>,
linuxppc-dev@ozlabs.org, jgarzik@pobox.com
Subject: [PATCH 7/16] Spidernet Cleanup return codes
Date: Wed, 6 Dec 2006 17:37:33 -0600 [thread overview]
Message-ID: <20061206233733.GG4649@austin.ibm.com> (raw)
In-Reply-To: <20061206223223.GH17931@austin.ibm.com>
Simplify the somewhat convoluted use of return codes
in the rx buffre handling.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
----
drivers/net/spider_net.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
Index: linux-2.6.19-git7/drivers/net/spider_net.c
===================================================================
--- linux-2.6.19-git7.orig/drivers/net/spider_net.c 2006-12-06 16:03:04.000000000 -0600
+++ linux-2.6.19-git7/drivers/net/spider_net.c 2006-12-06 16:03:06.000000000 -0600
@@ -882,12 +882,10 @@ spider_net_do_ioctl(struct net_device *n
* @card: card structure
* @napi: whether caller is in NAPI context
*
- * returns 1 on success, 0 if no packet was passed to the stack
- *
* Fills out skb structure and passes the data to the stack.
* The descriptor state is not changed.
*/
-static int
+static void
spider_net_pass_skb_up(struct spider_net_descr *descr,
struct spider_net_card *card, int napi)
{
@@ -935,8 +933,6 @@ spider_net_pass_skb_up(struct spider_net
/* update netdevice statistics */
card->netdev_stats.rx_packets++;
card->netdev_stats.rx_bytes += skb->len;
-
- return 1;
}
/**
@@ -956,7 +952,6 @@ spider_net_decode_one_descr(struct spide
struct spider_net_descr_chain *chain = &card->rx_chain;
struct spider_net_descr *descr;
int status;
- int result;
unsigned long flags;
spin_lock_irqsave(&chain->lock, flags);
@@ -982,8 +977,6 @@ spider_net_decode_one_descr(struct spide
chain->tail = descr->next;
spin_unlock_irqrestore(&chain->lock, flags);
- result = 0;
-
/* unmap descriptor */
pci_unmap_single(card->pdev, descr->buf_addr,
SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
@@ -995,8 +988,7 @@ spider_net_decode_one_descr(struct spide
pr_err("%s: dropping RX descriptor with state %d\n",
card->netdev->name, status);
card->netdev_stats.rx_dropped++;
- dev_kfree_skb_irq(descr->skb);
- goto refill;
+ goto bad_desc;
}
if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
@@ -1005,8 +997,7 @@ spider_net_decode_one_descr(struct spide
pr_err("%s: RX descriptor with unkown state %d\n",
card->netdev->name, status);
card->spider_stats.rx_desc_unk_state++;
- dev_kfree_skb_irq(descr->skb);
- goto refill;
+ goto bad_desc;
}
/* The cases we'll throw away the packet immediately */
@@ -1017,16 +1008,18 @@ spider_net_decode_one_descr(struct spide
card->netdev->name,
descr->data_status, descr->data_error);
card->spider_stats.rx_desc_error++;
- dev_kfree_skb_irq(descr->skb);
- goto refill;
+ goto bad_desc;
}
- /* ok, we've got a packet in descr */
- result = spider_net_pass_skb_up(descr, card, napi);
-refill:
- /* change the descriptor state: */
+ /* Ok, we've got a packet in descr */
+ spider_net_pass_skb_up(descr, card, napi);
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
- return result;
+ return 1;
+
+bad_desc:
+ dev_kfree_skb_irq(descr->skb);
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+ return 0;
}
/**
next prev parent reply other threads:[~2006-12-06 23:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-06 22:32 [PATCH 0/16] Spidernet RX Misc cleanups and fixes Linas Vepstas
2006-12-06 23:27 ` [PATCH 1/16] Spidernet DMA coalescing Linas Vepstas
2006-12-07 7:08 ` Andrew Morton
2006-12-07 17:16 ` Linas Vepstas
2006-12-08 2:12 ` Mail forwarding loop (was: Re: [PATCH 1/16] Spidernet DMA coalescing) Stephen Rothwell
2006-12-07 10:11 ` [PATCH 1/16] Spidernet DMA coalescing Christoph Hellwig
2006-12-13 17:27 ` Linas Vepstas
2006-12-06 23:29 ` [PATCH 2/16] Spidernet add net_ratelimit to suppress long output Linas Vepstas
2006-12-06 23:31 ` [PATCH 3/16] Spidernet RX Locking Linas Vepstas
2006-12-07 10:09 ` Jeff Garzik
2006-12-07 17:50 ` Linas Vepstas
2006-12-08 22:47 ` Benjamin Herrenschmidt
2006-12-11 21:07 ` Linas Vepstas
2006-12-06 23:33 ` [PATCH 4/16] Spidernet Refactor RX refill Linas Vepstas
2006-12-06 23:34 ` [PATCH 5/16] Spidernet RX skb mem leak Linas Vepstas
2006-12-06 23:36 ` [PATCH 6/16] Spidernet another " Linas Vepstas
2006-12-06 23:37 ` Linas Vepstas [this message]
2006-12-06 23:39 ` [PATCH 8/16] Spidernet RX Refill Linas Vepstas
2006-12-06 23:40 ` [PATCH 9/16] Spidernet Merge error branches Linas Vepstas
2006-12-06 23:41 ` [PATCH 10/16] Spidernet Remove unused variable Linas Vepstas
2006-12-06 23:42 ` [PATCH 11/16] Spidernet RX Chain tail Linas Vepstas
2006-12-06 23:43 ` [PATCH 12/16] Spidernet Turn RX irq back on Linas Vepstas
2006-12-06 23:45 ` [PATCH 13/16] Spidernet Memory barrier Linas Vepstas
2006-12-06 23:46 ` [PATCH 14/16] Spidernet Avoid possible RX chain corruption Linas Vepstas
2006-12-06 23:49 ` [PATCH 15/16] Spidernet RX Debugging printout Linas Vepstas
2006-12-06 23:51 ` [PATCH 16/16] Spidernet Rework RX linked list Linas Vepstas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061206233733.GG4649@austin.ibm.com \
--to=linas@austin.ibm.com \
--cc=akpm@osdl.org \
--cc=arnd@arndb.de \
--cc=jgarzik@pobox.com \
--cc=jklewis@us.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).