From: Christian Krafft <krafft@de.ibm.com>
To: Christian Krafft <krafft@de.ibm.com>
Cc: linuxppc-dev@ozlabs.org, openipmi-developer@lists.sourceforge.net
Subject: Re: [patch 1/1] ipmi: add autosensing of ipmi device on powerpc using device-tree
Date: Thu, 7 Dec 2006 17:24:45 +0100 [thread overview]
Message-ID: <20061207172445.2108cf43@localhost> (raw)
In-Reply-To: <20061207172259.64168f8c@localhost>
This patch adds support for of_platform_driver to the ipmi_si module.
When loading the module, the driver will be registered to of_platform.
The driver will be probed for all devices with the type ipmi. It's supporti=
ng
devices with compatible settings ipmi-kcs, ipmi-smic and ipmi-bt.
Only ipmi-kcs could be tested.
Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Index: linux-2.6.19-rc6/drivers/char/ipmi/ipmi_si_intf.c
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--- linux-2.6.19-rc6.orig/drivers/char/ipmi/ipmi_si_intf.c
+++ linux-2.6.19-rc6/drivers/char/ipmi/ipmi_si_intf.c
@@ -9,6 +9,7 @@
* source@mvista.com
*
* Copyright 2002 MontaVista Software Inc.
+ * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -62,6 +63,12 @@
#include <linux/init.h>
#include <linux/dmi.h>
=20
+/* only exists on powerpc */
+#ifdef CONFIG_PPC_OF
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#endif
+
/* Measure times between events in the driver. */
#undef DEBUG_TIMING
=20
@@ -1884,6 +1891,90 @@ static struct pci_driver ipmi_pci_driver
#endif /* CONFIG_PCI */
=20
=20
+#ifdef CONFIG_PPC_OF
+static int ipmi_of_probe(struct of_device *dev, const struct of_device_id =
*match)
+{
+ struct smi_info *info;
+ struct resource resource0, resource1;
+ struct device_node *np =3D dev->node;
+ int ret;
+
+ dev_info(&dev->dev, "probing via device tree\n");
+
+ if (match->data) {
+ dev_warn(&dev->dev, "unknown interface type\n");
+ return -ENODEV;
+ }
+
+ ret =3D of_address_to_resource(np, 0, &resource0);
+
+ if (ret) {
+ dev_warn(&dev->dev, "invalid address\n");
+ return ret;
+ }
+
+ ret =3D of_address_to_resource(np, 1, &resource1);
+
+ if (ret) {
+ dev_warn(&dev->dev, "invalid address\n");
+ return ret;
+ }
+
+ info =3D kzalloc(sizeof(*info), GFP_KERNEL);
+
+ if (!info) {
+ dev_err(&dev->dev, "could not allocate memory\n");
+ return -ENOMEM;
+ }
+
+ info->si_type =3D (enum si_type) match->data;
+ info->addr_source =3D "device-tree";
+ info->io_setup =3D mem_setup;
+ info->irq_setup =3D std_irq_setup;
+
+ info->io.addr_type =3D IPMI_MEM_ADDR_SPACE;
+ info->io.addr_data =3D resource0.start;
+ info->io.regsize =3D resource0.end - resource0.start + 1;
+ info->io.regspacing =3D resource1.start - resource0.start;
+ info->io.regshift =3D 0; /* regshift property if needed */
+ info->irq =3D irq_of_parse_and_map(dev->node, 0);
+ info->dev =3D &dev->dev;
+
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %ld spacing %ld irq %x\n",
+ info->io.addr_data, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ return try_smi_init(info);
+}
+
+static int ipmi_of_remove(struct of_device *dev)
+{
+ return 0;
+}
+
+static struct of_device_id ipmi_match[] =3D
+{
+ { .type =3D "ipmi", .compatible =3D "ipmi-kcs", .data =3D (void*)SI_KCS },
+ { .type =3D "ipmi", .compatible =3D "ipmi-smic", .data =3D (void*)SI_SMIC=
},
+ { .type =3D "ipmi", .compatible =3D "ipmi-bt", .data =3D (void*)SI_BT },
+ {},
+};
+
+static struct of_platform_driver ipmi_of_platform_driver =3D
+{
+ .name =3D "ipmi",
+ .match_table =3D ipmi_match,
+ .probe =3D ipmi_of_probe,
+ .remove =3D ipmi_of_remove
+};
+
+static void __devinit of_find_bmc(void)
+{
+ of_register_platform_driver(&ipmi_of_platform_driver);
+}
+#endif /* CONFIG_PM_OF */
+
+
static int try_get_dev_id(struct smi_info *smi_info)
{
unsigned char msg[2];
@@ -2486,6 +2577,10 @@ static __devinit int init_ipmi_si(void)
pci_module_init(&ipmi_pci_driver);
#endif
=20
+#ifdef CONFIG_PPC_OF
+ of_find_bmc();
+#endif
+
if (si_trydefaults) {
mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
@@ -2583,6 +2678,10 @@ static __exit void cleanup_ipmi_si(void)
pci_unregister_driver(&ipmi_pci_driver);
#endif
=20
+#ifdef CONFIG_OF_PPC
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
+
mutex_lock(&smi_infos_lock);
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
cleanup_one_si(e);
--=20
Mit freundlichen Gr=FCssen,
kind regards,
Christian Krafft
IBM Systems & Technology Group,=20
Linux Kernel Development
IT Specialist
next prev parent reply other threads:[~2006-12-07 16:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-07 16:22 [patch 0/1] ipmi: add autosensing of ipmi device on powerpc using device-tree Christian Krafft
2006-12-07 16:24 ` Christian Krafft [this message]
2006-12-08 10:24 ` [patch 1/1] " Heiko Joerg Schick
2006-12-08 17:19 ` [Openipmi-developer] " Corey Minyard
2006-12-11 12:13 ` Christian Krafft
2006-12-08 18:59 ` Corey Minyard
2006-12-08 19:49 ` Arnd Bergmann
2006-12-08 22:50 ` Benjamin Herrenschmidt
2006-12-09 0:00 ` Arnd Bergmann
2006-12-09 0:07 ` Corey Minyard
2006-12-09 11:44 ` Arnd Bergmann
2006-12-10 18:42 ` Heiko J Schick
2006-12-11 10:11 ` Arnd Bergmann
2006-12-11 13:01 ` Heiko J Schick
2006-12-11 13:37 ` Segher Boessenkool
2006-12-11 13:18 ` Segher Boessenkool
2006-12-11 14:25 ` Arnd Bergmann
2006-12-11 16:28 ` Heiko J Schick
2006-12-11 16:58 ` Segher Boessenkool
2006-12-11 17:20 ` Christian Krafft
2006-12-11 16:54 ` Segher Boessenkool
2006-12-09 2:14 ` Benjamin Herrenschmidt
2006-12-09 9:46 ` Segher Boessenkool
2006-12-09 11:46 ` Arnd Bergmann
2006-12-08 0:41 ` [patch 0/1] " Paul Mackerras
2006-12-08 14:04 ` Arnd Bergmann
2006-12-08 17:17 ` [Openipmi-developer] " Corey Minyard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061207172445.2108cf43@localhost \
--to=krafft@de.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=openipmi-developer@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).