* ## Transferring control to Linux (at address 0x00000000) ... Stop here
@ 2006-12-15 3:59 陈希
0 siblings, 0 replies; only message in thread
From: 陈希 @ 2006-12-15 3:59 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
I use uboot to start linux. And my upm table has something wrong, so
I just set the OR1 to disbale the ram burst read/write. The uboot running
looks like OK.
Now,when I start linux, the terminal only displays "##
Transferring control to Linux (at address 0x00000000) ..." and stop here. I
just want ot know if the ram mode can effect starting linux, such as
mmu,cache and so on, and I must correct upm table firstly, or I can ignore
the point and focus on the linux kernel itself, maybe console setup, maybe
some other parameters . My goal is aeesrt the factor, ram mode, linux kernel
setup or both.
Thanks and Br,
Andy
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-15 3:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-15 3:59 ## Transferring control to Linux (at address 0x00000000) ... Stop here 陈希
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).