From: 김영환 <yhkim93@keti.re.kr>
To: <linuxppc-embedded@ozlabs.org>
Subject: u-boot error on ppc440SPe yucca board.
Date: Fri, 15 Dec 2006 20:20:29 +0900 [thread overview]
Message-ID: <20061215121517.E49EC67BAD@ozlabs.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 1501 bytes --]
I have installed at a slot of yucca board PCIE with LSI-Logic Mega RAID SAS
adapter. But it was happened the following error. What is problem?
Yucca board continues to reboot u-boot code.
============================================================================
==================================
U-Boot 1.1.6 (Nov 13 2006 - 11:42:57)
CPU: AMCC PowerPC 440SPe Rev. B at 533.328 MHz (PLB=133, OPB=66, EBC=66
MHz)
I2C boot EEPROM enabled
Bootstrap Option D - Boot ROM Location I2C (Addr 0x50)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Yucca - AMCC 440SPe Evaluation Board
I2C: ready
DRAM: 1024 MB
FLASH: 5 MB
PCI: Bus Dev VenId DevId Class Int
PCIE:1 successfully set as rootpoint
Bus Fault @ 0x00000000, fixup 0x00000000 Machine check in kernel mode.
Caused by (from msr): regs 3ff31d28 Unknown values in msr
NIP: 00000000 XER: 20000000 LR: 3FFD47E4 REGS: 3ff31d28 TRAP: 0200 DAR:
49642043
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00
GPR00: 000000FF 3FF31E18 7FFFFFFF 3FFEFE74 00010800 0000000E 00000001
3FF31E30
GPR08: 00000014 C0001000 3FFEFE88 3FFEFE88 42FF2F82 00000000 3FFE6500
40002000
GPR16: 00000000 00000000 00000000 00000000 00000000 3FF31D18 00000000
00010000
GPR24: 3FFB4914 00000001 00000000 00000001 3FF31E68 3FF31F50 3FFE6CE0
00010800 Call backtrace:
machine check
============================================================================
=================================================
[-- Attachment #2: Type: text/html, Size: 9343 bytes --]
next reply other threads:[~2006-12-15 12:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-15 11:20 김영환 [this message]
2006-12-15 15:56 ` u-boot error on ppc440SPe yucca board Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061215121517.E49EC67BAD@ozlabs.org \
--to=yhkim93@keti.re.kr \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox