* [PATCH 0/3] 8560 && 8272 CPM-related fixes resubmit
@ 2007-01-24 19:19 Vitaly Bordug
2007-01-24 19:19 ` [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix Vitaly Bordug
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Vitaly Bordug @ 2007-01-24 19:19 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
Paul,
All the points you've noticed are addressed here.
Fs-enet change has been sent over to netdev && Jeff, so is excluded from here
this round, as well as cpm-uart, that is mandatory for CPM1 only and hereby
will be folded into upcoming 8xx series.
--
Sincerely, Vitaly
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix 2007-01-24 19:19 [PATCH 0/3] 8560 && 8272 CPM-related fixes resubmit Vitaly Bordug @ 2007-01-24 19:19 ` Vitaly Bordug 2007-01-24 21:56 ` Kumar Gala 2007-01-24 19:19 ` [PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads Vitaly Bordug 2007-01-24 19:19 ` [PATCH 3/3] [POWERPC] mpc8272ads: defconfig Vitaly Bordug 2 siblings, 1 reply; 5+ messages in thread From: Vitaly Bordug @ 2007-01-24 19:19 UTC (permalink / raw) To: Paul Mackerras; +Cc: linuxppc-dev This contains important fixes for the CPM2 PIC code. Eliminated CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt mapping. Updated devicetree files to reflect that. Changed direct IC-related IO accesses to the IO accessors. Fixed all the sense values to keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs and hence could be hardly usable. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> --- arch/powerpc/boot/dts/mpc8272ads.dts | 47 +++++++----- arch/powerpc/boot/dts/mpc8560ads.dts | 10 +- arch/powerpc/sysdev/cpm2_pic.c | 138 +++++++++++++++++++--------------- arch/powerpc/sysdev/cpm2_pic.h | 9 ++ include/asm-powerpc/mpc8260.h | 24 ++++++ 5 files changed, 142 insertions(+), 86 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 34efdd0..286638e 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -53,6 +53,13 @@ reg = <00000000 4000000 f4500000 00000020>; }; + chosen { + name = "chosen"; + linux,platform = <0>; + interrupt-controller = <10c00>; + linux,phandle = <400>; + }; + soc8272@f0000000 { #address-cells = <1>; #size-cells = <1>; @@ -71,7 +78,7 @@ ethernet-phy@0 { linux,phandle = <2452000>; interrupt-parent = <10c00>; - interrupts = <19 1>; + interrupts = <17 4>; reg = <0>; bitbang = [ 12 12 13 02 02 01 ]; device_type = "ethernet-phy"; @@ -79,7 +86,7 @@ ethernet-phy@1 { linux,phandle = <2452001>; interrupt-parent = <10c00>; - interrupts = <19 1>; + interrupts = <17 4>; bitbang = [ 12 12 13 02 02 01 ]; reg = <3>; device_type = "ethernet-phy"; @@ -90,7 +97,7 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - device-id = <2>; + device-id = <1>; compatible = "fs_enet"; model = "FCC"; reg = <11300 20 8400 100 11380 30>; @@ -104,7 +111,7 @@ ethernet@25000 { device_type = "network"; - device-id = <3>; + device-id = <2>; compatible = "fs_enet"; model = "FCC"; reg = <11320 20 8500 100 113b0 30>; @@ -133,7 +140,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <2>; + device-id = <1>; reg = <11a00 20 8000 100>; current-speed = <1c200>; interrupts = <28 2>; @@ -147,7 +154,7 @@ device_type = "serial"; compatible = "cpm_uart"; model = "SCC"; - device-id = <5>; + device-id = <4>; reg = <11a60 20 8300 100>; current-speed = <1c200>; interrupts = <2b 2>; @@ -181,24 +188,24 @@ interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 0 - b000 0 0 2 f8200000 41 0 - b000 0 0 3 f8200000 42 0 - b000 0 0 4 f8200000 43 0 + b000 0 0 1 f8200000 40 8 + b000 0 0 2 f8200000 41 8 + b000 0 0 3 f8200000 42 8 + b000 0 0 4 f8200000 43 8 /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 0 - b800 0 0 2 f8200000 40 0 - b800 0 0 3 f8200000 41 0 - b800 0 0 4 f8200000 42 0 + b800 0 0 1 f8200000 43 8 + b800 0 0 2 f8200000 40 8 + b800 0 0 3 f8200000 41 8 + b800 0 0 4 f8200000 42 8 /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 0 - c000 0 0 2 f8200000 43 0 - c000 0 0 3 f8200000 40 0 - c000 0 0 4 f8200000 41 0>; + c000 0 0 1 f8200000 42 8 + c000 0 0 2 f8200000 43 8 + c000 0 0 3 f8200000 40 8 + c000 0 0 4 f8200000 41 8>; interrupt-parent = <10c00>; - interrupts = <14 3>; + interrupts = <14 8>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 40000000 01000000 0 00000000 f6000000 0 02000000>; @@ -210,7 +217,7 @@ model = "SEC2"; compatible = "talitos"; reg = <30000 10000>; - interrupts = <b 0>; + interrupts = <b 2>; interrupt-parent = <10c00>; num-channels = <4>; channel-fifo-len = <18>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 2b16848..119bd5d 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -200,7 +200,7 @@ a800 0 0 4 40000 31 1>; interrupt-parent = <40000>; - interrupts = <42 0>; + interrupts = <8 0>; bus-range = <0 0>; ranges = <02000000 0 80000000 80000000 0 20000000 01000000 0 00000000 e2000000 0 01000000>; @@ -250,7 +250,7 @@ rx-clock = <1>; tx-clock = <1>; current-speed = <1c200>; - interrupts = <64 1>; + interrupts = <28 8>; interrupt-parent = <90c00>; }; @@ -264,7 +264,7 @@ rx-clock = <2>; tx-clock = <2>; current-speed = <1c200>; - interrupts = <65 1>; + interrupts = <29 8>; interrupt-parent = <90c00>; }; @@ -278,7 +278,7 @@ clock-setup = <ff00ffff 250000>; rx-clock = <15>; tx-clock = <16>; - interrupts = <5d 1>; + interrupts = <21 8>; interrupt-parent = <90c00>; phy-handle = <2452002>; }; @@ -293,7 +293,7 @@ clock-setup = <ffff00ff 3700>; rx-clock = <17>; tx-clock = <18>; - interrupts = <5e 1>; + interrupts = <22 8>; interrupt-parent = <90c00>; phy-handle = <2452003>; }; diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 767ee66..9ff7b1b 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -36,6 +36,7 @@ #include <asm/mpc8260.h> #include <asm/io.h> #include <asm/prom.h> +#include <asm/fs_pd.h> #include "cpm2_pic.h" @@ -68,68 +69,55 @@ static const u_char irq_to_siubit[] = { 24, 25, 26, 27, 28, 29, 30, 31, }; -static void cpm2_mask_irq(unsigned int irq_nr) +static void cpm2_mask_irq(unsigned int virq) { int bit, word; - volatile uint *simr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] &= ~(1 << bit); - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); } -static void cpm2_unmask_irq(unsigned int irq_nr) +static void cpm2_unmask_irq(unsigned int virq) { int bit, word; - volatile uint *simr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); } -static void cpm2_mask_and_ack(unsigned int irq_nr) +static void cpm2_ack(unsigned int virq) { int bit, word; - volatile uint *simr, *sipnr; - - irq_nr -= CPM_IRQ_OFFSET; + unsigned int irq_nr = virq_to_hw(virq); bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); - sipnr = &(cpm2_intctl->ic_sipnrh); - ppc_cached_irq_mask[word] &= ~(1 << bit); - simr[word] = ppc_cached_irq_mask[word]; - sipnr[word] = 1 << bit; + out_be32(&cpm2_intctl->ic_sipnrh + word, 1 << bit); } -static void cpm2_end_irq(unsigned int irq_nr) +static void cpm2_end_irq(unsigned int virq) { int bit, word; - volatile uint *simr; + unsigned int irq_nr = virq_to_hw(virq); if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && irq_desc[irq_nr].action) { - irq_nr -= CPM_IRQ_OFFSET; bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; - simr = &(cpm2_intctl->ic_simrh); ppc_cached_irq_mask[word] |= 1 << bit; - simr[word] = ppc_cached_irq_mask[word]; + out_be32(&cpm2_intctl->ic_simrh + word, ppc_cached_irq_mask[word]); + /* * Work around large numbers of spurious IRQs on PowerPC 82xx * systems. @@ -138,13 +126,59 @@ static void cpm2_end_irq(unsigned int irq_nr) } } +static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + unsigned int src = virq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vold, vnew, edibit; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + if (flow_type & IRQ_TYPE_EDGE_RISING) { + printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n", + flow_type); + return -EINVAL; + } + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & IRQ_TYPE_LEVEL_LOW) { + desc->status |= IRQ_LEVEL; + desc->handle_irq = handle_level_irq; + } else + desc->handle_irq = handle_edge_irq; + + /* internal IRQ senses are LEVEL_LOW + * EXT IRQ and Port C IRQ senses are programmable + */ + if (src >= CPM2_IRQ_EXT1 && src <= CPM2_IRQ_EXT7) + edibit = (14 - (src - CPM2_IRQ_EXT1)); + else + if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) + edibit = (31 - (src - CPM2_IRQ_PORTC15)); + else + return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL; + + vold = in_be32(&cpm2_intctl->ic_siexr); + + if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING) + vnew = vold | (1 << edibit); + else + vnew = vold & ~(1 << edibit); + + if (vold != vnew) + out_be32(&cpm2_intctl->ic_siexr, vnew); + return 0; +} + static struct irq_chip cpm2_pic = { .typename = " CPM2 SIU ", - .enable = cpm2_unmask_irq, - .disable = cpm2_mask_irq, + .mask = cpm2_mask_irq, .unmask = cpm2_unmask_irq, - .mask_ack = cpm2_mask_and_ack, - .end = cpm2_end_irq, + .ack = cpm2_ack, + .eoi = cpm2_end_irq, + .set_type = cpm2_set_irq_type, }; unsigned int cpm2_get_irq(void) @@ -154,17 +188,17 @@ unsigned int cpm2_get_irq(void) /* For CPM2, read the SIVEC register and shift the bits down * to get the irq number. */ - bits = cpm2_intctl->ic_sivec; + bits = in_be32(&cpm2_intctl->ic_sivec); irq = bits >> 26; if (irq == 0) return(-1); - return irq+CPM_IRQ_OFFSET; + return irq_linear_revmap(cpm2_pic_host, irq); } static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node) { - return cpm2_pic_node == NULL || cpm2_pic_node == node; + return cpm2_pic_node == node; } static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, @@ -177,39 +211,21 @@ static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, return 0; } -static void cpm2_host_unmap(struct irq_host *h, unsigned int virq) -{ - /* Make sure irq is masked in hardware */ - cpm2_mask_irq(virq); - - /* remove chip and handler */ - set_irq_chip_and_handler(virq, NULL, NULL); -} - static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { - static const unsigned char map_cpm2_senses[4] = { - IRQ_TYPE_LEVEL_LOW, - IRQ_TYPE_LEVEL_HIGH, - IRQ_TYPE_EDGE_FALLING, - IRQ_TYPE_EDGE_RISING, - }; - *out_hwirq = intspec[0]; - if (intsize > 1 && intspec[1] < 4) - *out_flags = map_cpm2_senses[intspec[1]]; + if (intsize > 1) + *out_flags = intspec[1]; else *out_flags = IRQ_TYPE_NONE; - return 0; } static struct irq_host_ops cpm2_pic_host_ops = { .match = cpm2_pic_host_match, .map = cpm2_pic_host_map, - .unmap = cpm2_host_unmap, .xlate = cpm2_pic_host_xlate, }; @@ -223,26 +239,26 @@ void cpm2_pic_init(struct device_node *node) /* Mask out everything */ - cpm2_intctl->ic_simrh = 0x00000000; - cpm2_intctl->ic_simrl = 0x00000000; + out_be32(&cpm2_intctl->ic_simrh, 0x00000000); + out_be32(&cpm2_intctl->ic_simrl, 0x00000000); wmb(); /* Ack everything */ - cpm2_intctl->ic_sipnrh = 0xffffffff; - cpm2_intctl->ic_sipnrl = 0xffffffff; + out_be32(&cpm2_intctl->ic_sipnrh, 0xffffffff); + out_be32(&cpm2_intctl->ic_sipnrl, 0xffffffff); wmb(); /* Dummy read of the vector */ - i = cpm2_intctl->ic_sivec; + i = in_be32(&cpm2_intctl->ic_sivec); rmb(); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. */ - cpm2_intctl->ic_sicr = 0; - cpm2_intctl->ic_scprrh = 0x05309770; - cpm2_intctl->ic_scprrl = 0x05309770; + out_be16(&cpm2_intctl->ic_sicr, 0); + out_be32(&cpm2_intctl->ic_scprrh, 0x05309770); + out_be32(&cpm2_intctl->ic_scprrl, 0x05309770); /* create a legacy host */ if (node) diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h index 2840616..643a857 100644 --- a/arch/powerpc/sysdev/cpm2_pic.h +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -1,6 +1,15 @@ #ifndef _PPC_KERNEL_CPM2_H #define _PPC_KERNEL_CPM2_H + +/* External IRQS */ +#define CPM2_IRQ_EXT1 19 +#define CPM2_IRQ_EXT7 25 + +/* Port C IRQS */ +#define CPM2_IRQ_PORTC15 48 +#define CPM2_IRQ_PORTC0 63 + extern intctl_cpm2_t *cpm2_intctl; extern unsigned int cpm2_get_irq(void); diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h new file mode 100644 index 0000000..f1b83b0 --- /dev/null +++ b/include/asm-powerpc/mpc8260.h @@ -0,0 +1,24 @@ +/* + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8260 configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __ASM_PPC_MPC8260_H__ +#define __ASM_PPC_MPC8260_H__ + + +#ifdef CONFIG_8260 + +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) +#include <platforms/82xx/pq2ads.h> +#endif + +#ifdef CONFIG_PCI_8260 +#include <platforms/82xx/m82xx_pci.h> +#endif + +#endif /* CONFIG_8260 */ +#endif /* !__ASM_PPC_MPC8260_H__ */ +#endif /* __KERNEL__ */ ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix 2007-01-24 19:19 ` [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix Vitaly Bordug @ 2007-01-24 21:56 ` Kumar Gala 0 siblings, 0 replies; 5+ messages in thread From: Kumar Gala @ 2007-01-24 21:56 UTC (permalink / raw) To: Vitaly Bordug; +Cc: linuxppc-dev, Paul Mackerras On Jan 24, 2007, at 1:19 PM, Vitaly Bordug wrote: > > This contains important fixes for the CPM2 PIC code. Eliminated > CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the > interrupt > mapping. Updated devicetree files to reflect that. Changed direct > IC-related IO accesses to the IO accessors. Fixed all the sense > values to > keep coherency with ipic. In the current code, CPM2 stuff will have > no IRQs > and hence could be hardly usable. > > Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> > --- > > arch/powerpc/boot/dts/mpc8272ads.dts | 47 +++++++----- > arch/powerpc/boot/dts/mpc8560ads.dts | 10 +- > arch/powerpc/sysdev/cpm2_pic.c | 138 ++++++++++++++++++ > +--------------- > arch/powerpc/sysdev/cpm2_pic.h | 9 ++ > include/asm-powerpc/mpc8260.h | 24 ++++++ > 5 files changed, 142 insertions(+), 86 deletions(-) [snip] > diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/ > cpm2_pic.h > index 2840616..643a857 100644 > --- a/arch/powerpc/sysdev/cpm2_pic.h > +++ b/arch/powerpc/sysdev/cpm2_pic.h > @@ -1,6 +1,15 @@ > #ifndef _PPC_KERNEL_CPM2_H > #define _PPC_KERNEL_CPM2_H > > + > +/* External IRQS */ > +#define CPM2_IRQ_EXT1 19 > +#define CPM2_IRQ_EXT7 25 > + > +/* Port C IRQS */ > +#define CPM2_IRQ_PORTC15 48 > +#define CPM2_IRQ_PORTC0 63 > + Let's just add these defines in the .c since they aren't needed by anyone else. > extern intctl_cpm2_t *cpm2_intctl; Can you explain the logic here with cpm2_intctl? It seems like cpm2_reset sets this pointer and that's it. Would it make more sense to just have cpm2_pic_init use cpm2_immr and keep cpm2_intctl static to cpm2_pic.c? > extern unsigned int cpm2_get_irq(void); Also, we should think about moving cpm2_cascade() from 85xx into cpm2_pic.c/h - kumar ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads 2007-01-24 19:19 [PATCH 0/3] 8560 && 8272 CPM-related fixes resubmit Vitaly Bordug 2007-01-24 19:19 ` [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix Vitaly Bordug @ 2007-01-24 19:19 ` Vitaly Bordug 2007-01-24 19:19 ` [PATCH 3/3] [POWERPC] mpc8272ads: defconfig Vitaly Bordug 2 siblings, 0 replies; 5+ messages in thread From: Vitaly Bordug @ 2007-01-24 19:19 UTC (permalink / raw) To: Paul Mackerras; +Cc: linuxppc-dev Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> --- arch/powerpc/boot/dts/mpc8272ads.dts | 8 ++++---- arch/powerpc/platforms/82xx/mpc82xx.c | 2 +- arch/powerpc/platforms/82xx/mpc82xx_ads.c | 2 +- arch/powerpc/platforms/82xx/pq2ads.h | 5 +++-- arch/powerpc/platforms/Makefile | 1 + drivers/net/fs_enet/fs_enet.h | 1 + drivers/serial/cpm_uart/cpm_uart_cpm1.h | 3 --- drivers/serial/cpm_uart/cpm_uart_cpm2.h | 3 --- include/asm-powerpc/fs_pd.h | 6 ++++++ include/asm-powerpc/io.h | 6 ++++++ 10 files changed, 23 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 286638e..26b44f7 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -65,8 +65,8 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = < 0 0 2 00000000 f0000000 00053000>; - reg = <f0000000 0>; + ranges = <00000000 f0000000 00053000>; + reg = <f0000000 10000>; mdio@0 { device_type = "mdio"; @@ -130,8 +130,8 @@ #interrupt-cells = <2>; device_type = "cpm"; model = "CPM2"; - ranges = <00000000 00000000 3ffff>; - reg = <10d80 3280>; + ranges = <00000000 00000000 20000>; + reg = <0 20000>; command-proc = <119c0>; brg-frequency = <17D7840>; cpm_clk = <BEBC200>; diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index 0f5b30d..74e7892 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -50,7 +50,7 @@ #include <sysdev/fsl_soc.h> #include <sysdev/cpm2_pic.h> -#include "pq2ads_pd.h" +#include "pq2ads.h" static int __init get_freq(char *name, unsigned long *val) { diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index ea880f1..7334c1a 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -51,7 +51,7 @@ #include <sysdev/fsl_soc.h> #include <../sysdev/cpm2_pic.h> -#include "pq2ads_pd.h" +#include "pq2ads.h" #ifdef CONFIG_PCI static uint pci_clk_frq; diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index fb2f92b..5b5cca6 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -22,6 +22,7 @@ #ifndef __MACH_ADS8260_DEFS #define __MACH_ADS8260_DEFS +#include <linux/seq_file.h> #include <asm/ppcboot.h> /* For our show_cpuinfo hooks. */ @@ -46,12 +47,12 @@ #define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */ #define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */ #define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ -#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */ +#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ /* cpm serial driver works with constants below */ #define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) -#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET) +#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) #define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) #define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) #define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 507d1b9..f750212 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -8,6 +8,7 @@ endif obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h index 92590d8..569be22 100644 --- a/drivers/net/fs_enet/fs_enet.h +++ b/drivers/net/fs_enet/fs_enet.h @@ -9,6 +9,7 @@ #include <linux/dma-mapping.h> #include <linux/fs_enet_pd.h> +#include <asm/fs_pd.h> #ifdef CONFIG_CPM1 #include <asm/commproc.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index 5eb49ea..a99e45e 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -20,9 +20,6 @@ #define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3) #define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4) -/* the CPM address */ -#define CPM_ADDR IMAP_ADDR - static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h index 4b77911..1b3219f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -20,9 +20,6 @@ #define SCC3_IRQ SIU_INT_SCC3 #define SCC4_IRQ SIU_INT_SCC4 -/* the CPM address */ -#define CPM_ADDR CPM_MAP_ADDR - static inline void cpm_set_brg(int brg, int baud) { cpm_setbrg(brg, baud); diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h index 3d0e819..2ba51b9 100644 --- a/include/asm-powerpc/fs_pd.h +++ b/include/asm-powerpc/fs_pd.h @@ -25,6 +25,12 @@ static inline int uart_clock(void) return ppc_proc_freq; } +#if defined(CONFIG_8260) +#include <asm/mpc8260.h> +#elif defined(CONFIG_85xx) +#include <asm/mpc85xx.h> +#endif + #define cpm2_map(member) \ ({ \ u32 offset = offsetof(cpm2_map_t, member); \ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 1cd5323..301c9bb 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -732,6 +732,12 @@ static inline void * bus_to_virt(unsigned long address) #endif /* CONFIG_PPC32 */ +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) #endif /* __KERNEL__ */ ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/3] [POWERPC] mpc8272ads: defconfig 2007-01-24 19:19 [PATCH 0/3] 8560 && 8272 CPM-related fixes resubmit Vitaly Bordug 2007-01-24 19:19 ` [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix Vitaly Bordug 2007-01-24 19:19 ` [PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads Vitaly Bordug @ 2007-01-24 19:19 ` Vitaly Bordug 2 siblings, 0 replies; 5+ messages in thread From: Vitaly Bordug @ 2007-01-24 19:19 UTC (permalink / raw) To: Paul Mackerras; +Cc: linuxppc-dev Default config file for mpc8272ads (powerpc port).Though relevant bits went in, it is requied to keep proper default configuration for the target, which seems to be missed initially. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> --- arch/powerpc/configs/mpc8272_ads_defconfig | 848 ++++++++++++++++++++++++++++ 1 files changed, 848 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig new file mode 100644 index 0000000..2af4502 --- /dev/null +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -0,0 +1,848 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc5 +# Fri Jul 14 20:36:35 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +CONFIG_PPC_82xx=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="powerpc8272" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PQ2ADS=y +CONFIG_8260=y +CONFIG_8272=y +CONFIG_CPM2=y +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_EMBEDDEDBOOT=y + +# +# Platform support +# +CONFIG_ADS8272=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +# CONFIG_PC_KEYBOARD is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +CONFIG_SERIAL_CPM_SCC4=y +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-01-24 21:57 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-01-24 19:19 [PATCH 0/3] 8560 && 8272 CPM-related fixes resubmit Vitaly Bordug 2007-01-24 19:19 ` [PATCH 1/3] POWERPC] cpm2: CPM2 interrupt controller fix Vitaly Bordug 2007-01-24 21:56 ` Kumar Gala 2007-01-24 19:19 ` [PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads Vitaly Bordug 2007-01-24 19:19 ` [PATCH 3/3] [POWERPC] mpc8272ads: defconfig Vitaly Bordug
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).