[PATCH] maple: don't override bus-range supplied by firmware

[PATCH] maple: don't override bus-range supplied by firmware

[Nathan Lynch]

This workaround was copy-pasted from the powermac code.  It's not
necessary for maple.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
---
 arch/powerpc/platforms/maple/pci.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 011f0f1..73c5990 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -425,14 +425,6 @@ static void __init setup_u4_pcie(struct pci_controller* hose)
         hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
         hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
 
-        /* The bus contains a bridge from root -> device, we need to
-         * make it visible on bus 0 so that we pick the right type
-         * of config cycles. If we didn't, we would have to force all
-         * config cycles to be type 1. So we override the "bus-range"
-         * property here
-         */
-        hose->first_busno = 0x00;
-        hose->last_busno = 0xff;
         u4_pcie = hose;
 }
 
-- 
1.4.4.3