[0/10] arch/powerpc Ebony support (draft 3)

[0/10] arch/powerpc Ebony support (draft 3)

[David Gibson]

Here's my latest stack of Ebony patches.  Not yet ready for merging,
but getting closer.  Notable changes:
	- Rebased on top of my latest set of zImage patches (which in
turn are based on some of Milton and Scott's zImage work)
	- Device tree now contains rudimentary information on the EBC
and the Ebony's off-chip devices
	- Reset support is now folded in, rather than a distinct patch
in the series.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 1/10] Define FIXED_PORT flag for serial_core

[David Gibson]

At present, the serial core always allows setserial in userspace to
change the port address, irq and base clock of any serial port.  That
makes sense for legacy ISA ports, but not for (say) embedded ns16550
compatible serial ports at peculiar addresses.  In these cases, the
kernel code configuring the ports must know exactly where they are,
and their clocking arrangements (which can be unusual on embedded
boards).  It doesn't make sense for userspace to change these
settings.

Therefore, this patch defines a UPF_FIXED_PORT flag for the uart_port
structure.  If this flag is set when the serial port is configured,
any attempts to alter the port's type, io address, irq or base clock
with setserial are ignored.

In addition this patch uses the new flag for on-chip serial ports
probed in arch/powerpc/kernel/legacy_serial.c, and for other
hard-wired serial ports probed by drivers/serial/of_serial.c.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/kernel/legacy_serial.c |    3 ++-
 drivers/serial/of_serial.c          |    3 ++-
 drivers/serial/serial_core.c        |   22 +++++++++++++---------
 include/linux/serial_core.h         |    1 +
 4 files changed, 18 insertions(+), 11 deletions(-)

Index: working-2.6/drivers/serial/serial_core.c
===================================================================
--- working-2.6.orig/drivers/serial/serial_core.c	2007-02-19 11:05:32.000000000 +1100
+++ working-2.6/drivers/serial/serial_core.c	2007-02-20 11:38:08.000000000 +1100
@@ -672,19 +672,21 @@ static int uart_set_info(struct uart_sta
 	 */
 	mutex_lock(&state->mutex);
 
-	change_irq  = new_serial.irq != port->irq;
+	change_irq  = !(port->flags & UPF_FIXED_PORT)
+		&& new_serial.irq != port->irq;
 
 	/*
 	 * Since changing the 'type' of the port changes its resource
 	 * allocations, we should treat type changes the same as
 	 * IO port changes.
 	 */
-	change_port = new_port != port->iobase ||
-		      (unsigned long)new_serial.iomem_base != port->mapbase ||
-		      new_serial.hub6 != port->hub6 ||
-		      new_serial.io_type != port->iotype ||
-		      new_serial.iomem_reg_shift != port->regshift ||
-		      new_serial.type != port->type;
+	change_port = !(port->flags & UPF_FIXED_PORT)
+		&& (new_port != port->iobase ||
+		    (unsigned long)new_serial.iomem_base != port->mapbase ||
+		    new_serial.hub6 != port->hub6 ||
+		    new_serial.io_type != port->iotype ||
+		    new_serial.iomem_reg_shift != port->regshift ||
+		    new_serial.type != port->type);
 
 	old_flags = port->flags;
 	new_flags = new_serial.flags;
@@ -796,8 +798,10 @@ static int uart_set_info(struct uart_sta
 		}
 	}
 
-	port->irq              = new_serial.irq;
-	port->uartclk          = new_serial.baud_base * 16;
+	if (change_irq)
+		port->irq      = new_serial.irq;
+	if (! (port->flags & UPF_FIXED_PORT))
+		port->uartclk  = new_serial.baud_base * 16;
 	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
 	port->custom_divisor   = new_serial.custom_divisor;
Index: working-2.6/include/linux/serial_core.h
===================================================================
--- working-2.6.orig/include/linux/serial_core.h	2007-02-19 11:05:32.000000000 +1100
+++ working-2.6/include/linux/serial_core.h	2007-02-20 11:38:08.000000000 +1100
@@ -260,6 +260,7 @@ struct uart_port {
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
 #define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
+#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
 #define UPF_DEAD		((__force upf_t) (1 << 30))
 #define UPF_IOREMAP		((__force upf_t) (1 << 31))
 
Index: working-2.6/arch/powerpc/kernel/legacy_serial.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/legacy_serial.c	2007-02-15 10:05:18.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/legacy_serial.c	2007-02-20 10:50:16.000000000 +1100
@@ -115,7 +115,8 @@ static int __init add_legacy_soc_port(st
 {
 	u64 addr;
 	const u32 *addrp;
-	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
+		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
Index: working-2.6/drivers/serial/of_serial.c
===================================================================
--- working-2.6.orig/drivers/serial/of_serial.c	2007-02-20 11:38:16.000000000 +1100
+++ working-2.6/drivers/serial/of_serial.c	2007-02-20 11:38:30.000000000 +1100
@@ -48,7 +48,8 @@ static int __devinit of_platform_serial_
 	port->iotype = UPIO_MEM;
 	port->type = type;
 	port->uartclk = *clk;
-	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
+		| UPF_FIXED_PORT;
 	port->dev = &ofdev->dev;
 	port->custom_divisor = *clk / (16 * (*spd));
 

[PATCH 4/10] Add arch/powerpc driver for UIC, PPC4xx interrupt controller

[David Gibson]

This patch adds a driver to arch/powerpc/sysdev for the UIC, the
on-chip interrupt controller from IBM/AMCC 4xx chips.  It uses the new
irq host mapping infrastructure.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/sysdev/Makefile |    1 
 arch/powerpc/sysdev/uic.c    |  338 +++++++++++++++++++++++++++++++++++++++++++
 include/asm-powerpc/uic.h    |   23 ++
 3 files changed, 362 insertions(+)

Index: working-2.6/arch/powerpc/sysdev/uic.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/sysdev/uic.c	2007-02-21 15:54:39.000000000 +1100
@@ -0,0 +1,338 @@
+/*
+ * arch/powerpc/sysdev/uic.c
+ *
+ * IBM PowerPC 4xx Universal Interrupt Controller
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/dcr.h>
+
+#define NR_UIC_INTS	32
+
+#define UIC_SR		0x0
+#define UIC_ER		0x2
+#define UIC_CR		0x3
+#define UIC_PR		0x4
+#define UIC_TR		0x5
+#define UIC_MSR		0x6
+#define UIC_VR		0x7
+#define UIC_VCR		0x8
+
+#define uic_irq_to_hw(virq)	(irq_map[virq].hwirq)
+
+struct uic *primary_uic;
+
+struct uic {
+	int index;
+	int dcrbase;
+
+	spinlock_t lock;
+
+	/* The remapper for this UIC */
+	struct irq_host	*irqhost;
+
+	/* For secondary UICs, the cascade interrupt's irqaction */
+	struct irqaction cascade;
+
+	/* The device node of the interrupt controller */
+	struct device_node *of_node;
+};
+
+static void uic_unmask_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 er;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er |= 1 << (31 - src);
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 er;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er &= ~(1 << (31 - src));
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_ack_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	struct irq_desc *desc = get_irq_desc(virq);
+	unsigned long flags;
+	int trigger, polarity;
+	u32 tr, pr, mask;
+
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_NONE:
+		uic_mask_irq(virq);
+		return 0;
+
+	case IRQ_TYPE_EDGE_RISING:
+		trigger = 1; polarity = 1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trigger = 1; polarity = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trigger = 0; polarity = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trigger = 0; polarity = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mask = ~(1 << (31 - src));
+
+	spin_lock_irqsave(&uic->lock, flags);
+	tr = mfdcr(uic->dcrbase + UIC_TR);
+	pr = mfdcr(uic->dcrbase + UIC_PR);
+	tr = (tr & mask) | (trigger << (31-src));
+	pr = (pr & mask) | (polarity << (31-src));
+
+	mtdcr(uic->dcrbase + UIC_PR, pr);
+	mtdcr(uic->dcrbase + UIC_TR, tr);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (trigger)
+		desc->status |= IRQ_LEVEL;
+
+	spin_unlock_irqrestore(&uic->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip uic_irq_chip = {
+	.typename	= " UIC  ",
+	.unmask		= uic_unmask_irq,
+	.mask		= uic_mask_irq,
+/* 	.mask_ack	= uic_mask_irq_and_ack, */
+	.ack		= uic_ack_irq,
+	.set_type	= uic_set_irq_type,
+};
+
+static int uic_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct uic *uic = h->host_data;
+	return uic->of_node == node;
+}
+
+static int uic_host_map(struct irq_host *h, unsigned int virq,
+			irq_hw_number_t hw)
+{
+	struct uic *uic = h->host_data;
+
+	set_irq_chip_data(virq, uic);
+	/* Despite the name, handle_level_irq() works for both level
+	 * and edge irqs on UIC.  FIXME: check this is correct */
+	set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
+
+	/* Set default irq type */
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
+			  u32 *intspec, unsigned int intsize,
+			  irq_hw_number_t *out_hwirq, unsigned int *out_type)
+
+{
+	/* UIC intspecs must have 2 cells */
+	BUG_ON(intsize != 2);
+	*out_hwirq = intspec[0];
+	*out_type = intspec[1];
+	return 0;
+}
+
+static struct irq_host_ops uic_host_ops = {
+	.match	= uic_host_match,
+	.map	= uic_host_map,
+	.xlate	= uic_host_xlate,
+};
+
+irqreturn_t uic_cascade(int virq, void *data)
+{
+	struct uic *uic = data;
+	u32 msr;
+	int src;
+	int subvirq;
+
+	msr = mfdcr(uic->dcrbase + UIC_MSR);
+	src = 32 - ffs(msr);
+
+	subvirq = irq_linear_revmap(uic->irqhost, src);
+	generic_handle_irq(subvirq);
+
+	return IRQ_HANDLED;
+}
+
+static struct uic * __init uic_init_one(struct device_node *node)
+{
+	struct uic *uic;
+	const u32 *indexp, *dcrreg;
+	int len;
+
+	BUG_ON(! device_is_compatible(node, "ibm,uic"));
+
+	uic = alloc_bootmem(sizeof(*uic));
+	if (! uic)
+		return NULL; /* FIXME: panic? */
+
+	memset(uic, 0, sizeof(*uic));
+	uic->of_node = of_node_get(node);
+	indexp = get_property(node, "cell-index", &len);
+	if (!indexp || (len != sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %s has missing or invalid "
+		       "cell-index property\n", node->full_name);
+		return NULL;
+	}
+	uic->index = *indexp;
+
+	dcrreg = get_property(node, "dcr-reg", &len);
+	if (!dcrreg || (len != 2*sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %s has missing or invalid "
+		       "dcr-reg property\n", node->full_name);
+		return NULL;
+	}
+	uic->dcrbase = *dcrreg;
+
+	uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS,
+				      &uic_host_ops, -1);
+	if (! uic->irqhost) {
+		of_node_put(node);
+		return NULL; /* FIXME: panic? */
+	}
+
+	uic->irqhost->host_data = uic;
+
+	/* Start with all interrupts disable and non-critical */
+	mtdcr(uic->dcrbase + UIC_ER, 0);
+	mtdcr(uic->dcrbase + UIC_CR, 0);
+
+	printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
+		NR_UIC_INTS, uic->dcrbase);
+
+	return uic;
+}
+
+void __init uic_init_tree(void)
+{
+	struct device_node *np;
+	struct uic *uic;
+	const u32 *interrupts;
+
+	/* First locate and initialize the top-level UIC */
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+	while (np) {
+		interrupts = get_property(np, "interrupts", NULL);
+		if (! interrupts)
+			break;
+
+		np = of_find_compatible_node(np, NULL, "ibm,uic");
+	}
+
+	BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
+		      * top-level interrupt controller */
+	primary_uic = uic_init_one(np);
+	if (! primary_uic)
+		panic("Unable to initialize primary UIC %s\n", np->full_name);
+
+	irq_set_default_host(primary_uic->irqhost);
+	of_node_put(np);
+
+	/* The scan again for cascaded UICs */
+	np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+	while (np) {
+		interrupts = get_property(np, "interrupts", NULL);
+		if (interrupts) {
+			/* Secondary UIC */
+			int cascade_virq;
+			int ret;
+
+			uic = uic_init_one(np);
+			if (! uic)
+				panic("Unable to initialize a secondary UIC %s\n",
+				      np->full_name);
+
+			cascade_virq = irq_of_parse_and_map(np, 0);
+
+			uic->cascade.handler = uic_cascade;
+			uic->cascade.name = "UIC cascade";
+			uic->cascade.dev_id = uic;
+
+			ret = setup_irq(cascade_virq, &uic->cascade);
+			if (ret)
+				printk(KERN_ERR "Failed to setup_irq(%d) for "
+				       "UIC%d cascade\n", cascade_virq,
+				       uic->index);
+
+			/* FIXME: setup critical cascade?? */
+		}
+
+		np = of_find_compatible_node(np, NULL, "ibm,uic");
+	}
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int uic_get_irq(void)
+{
+	u32 msr;
+	int src;
+
+	BUG_ON(! primary_uic);
+
+	msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
+	src = 32 - ffs(msr);
+
+	return irq_linear_revmap(primary_uic->irqhost, src);
+}
Index: working-2.6/arch/powerpc/sysdev/Makefile
===================================================================
--- working-2.6.orig/arch/powerpc/sysdev/Makefile	2007-02-19 11:05:31.000000000 +1100
+++ working-2.6/arch/powerpc/sysdev/Makefile	2007-02-21 15:35:25.000000000 +1100
@@ -17,6 +17,7 @@ obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
+obj-$(CONFIG_4xx)		+= uic.o
 endif
 
 # Temporary hack until we have migrated to asm-powerpc
Index: working-2.6/include/asm-powerpc/uic.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/include/asm-powerpc/uic.h	2007-02-21 15:35:25.000000000 +1100
@@ -0,0 +1,23 @@
+/*
+ * include/asm-powerpc/uic.h
+ *
+ * IBM PPC4xx UIC external definitions and structure.
+ *
+ * Maintainer: David Gibson <dwg@au1.ibm.com>
+ * Copyright 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_UIC_H
+#define _ASM_POWERPC_UIC_H
+
+#ifdef __KERNEL__
+
+extern void __init uic_init_tree(void);
+extern unsigned int uic_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UIC_H */

Re: [PATCH 4/10] Add arch/powerpc driver for UIC, PPC4xx interrupt controller

[Domen Puncer]

On 22/03/07 20:22 +1100, David Gibson wrote:
> +static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)

> +	case IRQ_TYPE_LEVEL_HIGH:
> +		trigger = 0; polarity = 1;
> +		break;
> +	case IRQ_TYPE_LEVEL_LOW:
> +		trigger = 0; polarity = 1;

Is this intended to be the same?


	Domen

Re: [PATCH 4/10] Add arch/powerpc driver for UIC, PPC4xx interrupt controller

[David Gibson]

On Thu, Mar 22, 2007 at 10:51:18AM +0100, Domen Puncer wrote:
> On 22/03/07 20:22 +1100, David Gibson wrote:
> > +static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
> 
> > +	case IRQ_TYPE_LEVEL_HIGH:
> > +		trigger = 0; polarity = 1;
> > +		break;
> > +	case IRQ_TYPE_LEVEL_LOW:
> > +		trigger = 0; polarity = 1;
> 
> Is this intended to be the same?

Oops, no.  Thanks for spotting that, the Ebony has no level-low
devices, so I didn't notice any problems.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 4/10] Add arch/powerpc driver for UIC, PPC4xx interrupt controller

[Josh Boyer]

On Thu, 2007-03-22 at 20:22 +1100, David Gibson wrote:
> 
> Index: working-2.6/arch/powerpc/sysdev/uic.c
> ===================================================================

 <snip>

> +static struct uic * __init uic_init_one(struct device_node *node)
> +{
> +	struct uic *uic;
> +	const u32 *indexp, *dcrreg;
> +	int len;
> +
> +	BUG_ON(! device_is_compatible(node, "ibm,uic"));
> +
> +	uic = alloc_bootmem(sizeof(*uic));
> +	if (! uic)
> +		return NULL; /* FIXME: panic? */
> +
> +	memset(uic, 0, sizeof(*uic));
> +	uic->of_node = of_node_get(node);
> +	indexp = get_property(node, "cell-index", &len);
> +	if (!indexp || (len != sizeof(u32))) {
> +		printk(KERN_ERR "uic: Device node %s has missing or invalid "
> +		       "cell-index property\n", node->full_name);
> +		return NULL;
> +	}
> +	uic->index = *indexp;
> +
> +	dcrreg = get_property(node, "dcr-reg", &len);
> +	if (!dcrreg || (len != 2*sizeof(u32))) {
> +		printk(KERN_ERR "uic: Device node %s has missing or invalid "
> +		       "dcr-reg property\n", node->full_name);
> +		return NULL;
> +	}
> +	uic->dcrbase = *dcrreg;
> +
> +	uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS,
> +				      &uic_host_ops, -1);
> +	if (! uic->irqhost) {
> +		of_node_put(node);
> +		return NULL; /* FIXME: panic? */
> +	}
> +
> +	uic->irqhost->host_data = uic;
> +
> +	/* Start with all interrupts disable and non-critical */
> +	mtdcr(uic->dcrbase + UIC_ER, 0);
> +	mtdcr(uic->dcrbase + UIC_CR, 0);

I think at this point we should also clear the interrupts in the SR
register as well.  When playing with the Bamboo port, I found that the
firmware leaves pending interrupts, which can lead to some not nice
results when the cascade bits are enabled.

josh

[PATCH 7/10] Early serial debug support for PPC44x

[David Gibson]

This patch adds support for early serial debugging via the built in
port on IBM/AMCC PowerPC 44x CPUs.  It uses a bolted TLB entry in
address space 1 for the UART's mapping, allowing robust debugging both
before and after the initialization of the MMU.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/Kconfig.debug            |   23 ++++++++++++++++++-----
 arch/powerpc/kernel/head_44x.S        |   34 +++++++++++++---------------------
 arch/powerpc/kernel/of_platform.c     |    1 -
 arch/powerpc/kernel/udbg.c            |    3 +++
 arch/powerpc/kernel/udbg_16550.c      |   23 +++++++++++++++++++++++
 arch/powerpc/platforms/4xx/44x.h      |    2 ++
 arch/powerpc/platforms/4xx/misc_44x.S |   31 +++++++++++++++++++++++++++++++
 include/asm-powerpc/mmu-44x/mmu.h     |    7 ++++++-
 include/asm-powerpc/udbg.h            |    1 +
 9 files changed, 97 insertions(+), 28 deletions(-)

Index: working-2.6/arch/powerpc/Kconfig.debug
===================================================================
--- working-2.6.orig/arch/powerpc/Kconfig.debug	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/Kconfig.debug	2007-03-15 12:59:25.000000000 +1100
@@ -130,11 +130,6 @@ config BOOTX_TEXT
 	  Say Y here to see progress messages from the boot firmware in text
 	  mode. Requires either BootX or Open Firmware.
 
-config SERIAL_TEXT_DEBUG
-	bool "Support for early boot texts over serial port"
-	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
-		PPC_GEN550 || PPC_MPC52xx
-
 config PPC_EARLY_DEBUG
 	bool "Early debugging (dangerous)"
 
@@ -199,6 +194,24 @@ config PPC_EARLY_DEBUG_BEAT
 	help
 	  Select this to enable early debugging for Celleb with Beat.
 
+config PPC_EARLY_DEBUG_44x
+	bool "Early serial debugging for IBM/AMCC 44x CPUs"
+	depends on 44x
+	select PPC_UDBG_16550
+	help
+	  Select this to enable early debugging for IBM 44x chips via the
+	  inbuilt serial port.
+
 endchoice
 
+config PPC_EARLY_DEBUG_44x_PHYSLOW
+	hex "Low 32 bits of early debug UART physical address"
+	depends PPC_EARLY_DEBUG_44x
+	default "0x40000200"
+
+config PPC_EARLY_DEBUG_44x_PHYSHIGH
+	hex "EPRN of early debug UART physical address"
+	depends PPC_EARLY_DEBUG_44x
+	default "0x1"
+
 endmenu
Index: working-2.6/arch/powerpc/kernel/head_44x.S
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/head_44x.S	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/head_44x.S	2007-03-15 12:59:25.000000000 +1100
@@ -172,36 +172,28 @@ skpinv:	addi	r4,r4,1				/* Increment */
 	isync
 
 4:
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/*
-	 * Add temporary UART mapping for early debug.
-	 * We can map UART registers wherever we want as long as they don't
-	 * interfere with other system mappings (e.g. with pinned entries).
-	 * For an example of how we handle this - see ocotea.h.       --ebs
-	 */
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+	/* Add UART mapping for early debug. */
+
  	/* pageid fields */
-	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
+	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+	ori	r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
 
 	/* xlat fields */
-	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifndef CONFIG_440EP
-	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
-#endif
+	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
 
 	/* attrib fields */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
-
-        li      r0,0                    /* TLB slot 0 */
+	li	r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
+        li      r0,62                    /* TLB slot 0 */
 
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID
+	tlbwe	r4,r0,PPC44x_TLB_XLAT
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB
 
 	/* Force context change */
 	isync
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
Index: working-2.6/arch/powerpc/kernel/udbg_16550.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/udbg_16550.c	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/udbg_16550.c	2007-03-15 12:59:25.000000000 +1100
@@ -191,3 +191,26 @@ void udbg_init_pas_realmode(void)
 	udbg_getc_poll = NULL;
 }
 #endif /* CONFIG_PPC_MAPLE */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+#include <platforms/4xx/44x.h>
+
+static void udbg_44x_as1_putc(char c)
+{
+	if (udbg_comport) {
+		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+			/* wait for idle */;
+		as1_writeb(c, &udbg_comport->thr); eieio();
+		if (c == '\n')
+			udbg_44x_as1_putc('\r');
+	}
+}
+
+void __init udbg_init_44x_as1(void)
+{
+	udbg_comport =
+		(volatile struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
+
+	udbg_putc = udbg_44x_as1_putc;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
Index: working-2.6/include/asm-powerpc/mmu-44x/mmu.h
===================================================================
--- working-2.6.orig/include/asm-powerpc/mmu-44x/mmu.h	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/include/asm-powerpc/mmu-44x/mmu.h	2007-03-15 12:59:25.000000000 +1100
@@ -69,7 +69,12 @@ typedef struct {
 #define PPC44x_PIN_SHIFT	28
 #define PPC_PIN_SIZE		(1 << PPC44x_PIN_SHIFT)
 
+#ifndef CONFIG_PPC_EARLY_DEBUG_44x
 #define PPC44x_EARLY_TLBS	1
+#else
+#define PPC44x_EARLY_TLBS	2
+#define PPC44x_EARLY_DEBUG_VIRTADDR	(ASM_CONST(0xf0000000) \
+	| (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
+#endif
 
 #endif /* _ASM_POWERPC_MMU_44X_MMU_H_ */
-
Index: working-2.6/arch/powerpc/kernel/udbg.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/udbg.c	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/udbg.c	2007-03-15 12:59:25.000000000 +1100
@@ -51,6 +51,9 @@ void __init udbg_early_init(void)
 	udbg_init_pas_realmode();
 #elif defined(CONFIG_BOOTX_TEXT)
 	udbg_init_btext();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
+	/* PPC44x debug */
+	udbg_init_44x_as1();
 #endif
 }
 
Index: working-2.6/include/asm-powerpc/udbg.h
===================================================================
--- working-2.6.orig/include/asm-powerpc/udbg.h	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/include/asm-powerpc/udbg.h	2007-03-15 12:59:25.000000000 +1100
@@ -47,6 +47,7 @@ extern void __init udbg_init_rtas_panel(
 extern void __init udbg_init_rtas_console(void);
 extern void __init udbg_init_debug_beat(void);
 extern void __init udbg_init_btext(void);
+extern void __init udbg_init_44x_as1(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */
Index: working-2.6/arch/powerpc/kernel/of_platform.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/of_platform.c	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/of_platform.c	2007-03-15 12:59:25.000000000 +1100
@@ -29,7 +29,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/atomic.h>
 
-
 /*
  * The list of OF IDs below is used for matching bus types in the
  * system whose devices are to be exposed as of_platform_devices.
Index: working-2.6/arch/powerpc/platforms/4xx/misc_44x.S
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/4xx/misc_44x.S	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/4xx/misc_44x.S	2007-03-15 12:59:25.000000000 +1100
@@ -15,6 +15,37 @@
 	.text
 
 /*
+ * Do an IO access in AS1
+ */
+_GLOBAL(as1_readb)
+	mfmsr	r7
+	ori	r0,r7,MSR_DS
+	sync
+	mtmsr	r0
+	sync
+	isync
+	lbz	r3,0(r3)
+	sync
+	mtmsr	r7
+	sync
+	isync
+	blr
+
+_GLOBAL(as1_writeb)
+	mfmsr	r7
+	ori	r0,r7,MSR_DS
+	sync
+	mtmsr	r0
+	sync
+	isync
+	stb	r3,0(r4)
+	sync
+	mtmsr	r7
+	sync
+	isync
+	blr
+
+/*
  * void ppc44x_reset_system(char *cmd)
  *
  * At present, this routine just applies a system reset.
Index: working-2.6/arch/powerpc/platforms/4xx/44x.h
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/4xx/44x.h	2007-03-15 12:58:59.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/4xx/44x.h	2007-03-15 12:59:25.000000000 +1100
@@ -1,6 +1,8 @@
 #ifndef __POWERPC_PLATFORMS_4XX_44X_H
 #define __POWERPC_PLATFORMS_4XX_44X_H
 
+extern u8 as1_readb(volatile u8 __iomem  *addr);
+extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
 extern void ppc44x_reset_system(char *cmd);
 
 #endif /* __POWERPC_PLATFORMS_4XX_44X_H */

[PATCH 5/10] Port 44x MMU definitions to ARCH=powerpc

[David Gibson]

This patch moves the mmu.h definitions which are still relevant for
ARCH=powerpc from include/asm-ppc/mmu.h to their own file,
include/asm-powerpc/mmu_44x.h.  The new file is included from
asm-powerpc/mmu.h, and a couple of other tweaks to correct mmu
definitions for 44x are made.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/kernel/head_44x.S    |    4 -
 arch/powerpc/mm/44x_mmu.c         |   81 +++++++-------------------------------
 arch/powerpc/mm/mmu_decl.h        |    2 
 include/asm-powerpc/mmu-44x/mmu.h |   75 +++++++++++++++++++++++++++++++++++
 include/asm-powerpc/mmu.h         |   11 ++++-
 5 files changed, 105 insertions(+), 68 deletions(-)

Index: working-2.6/include/asm-powerpc/mmu.h
===================================================================
--- working-2.6.orig/include/asm-powerpc/mmu.h	2007-02-28 16:49:19.000000000 +1100
+++ working-2.6/include/asm-powerpc/mmu.h	2007-02-28 16:49:36.000000000 +1100
@@ -2,8 +2,15 @@
 #define _ASM_POWERPC_MMU_H_
 #ifdef __KERNEL__
 
-#ifndef CONFIG_PPC64
-#include <asm-ppc/mmu.h>
+#if defined(CONFIG_44x)
+/* 44x-style software loaded TLB */
+#  include <asm/mmu-44x/mmu.h>
+#elif !defined(CONFIG_PPC64)
+/* Other 32-bit.
+ *
+ * FIXME: split up the other 32-bit MMU types, and revise for
+ * arch/powerpc */
+#  include <asm-ppc/mmu.h>
 #else
 
 /*
Index: working-2.6/arch/powerpc/mm/44x_mmu.c
===================================================================
--- working-2.6.orig/arch/powerpc/mm/44x_mmu.c	2007-02-28 16:49:19.000000000 +1100
+++ working-2.6/arch/powerpc/mm/44x_mmu.c	2007-02-28 16:49:20.000000000 +1100
@@ -24,73 +24,35 @@
  *
  */
 
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
 #include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
 
 #include "mmu_decl.h"
 
-extern char etext[], _stext[];
-
 /* Used by the 44x TLB replacement exception handler.
  * Just needed it declared someplace.
  */
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = 62;
+unsigned int tlb_44x_index; /* = 0 */
+unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
  */
-static void __init
-ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
-	unsigned long attrib = 0;
-
-	__asm__ __volatile__("\
-	clrrwi	%2,%2,10\n\
-	ori	%2,%2,%4\n\
-	clrrwi	%1,%1,10\n\
-	li	%0,0\n\
-	ori	%0,%0,%5\n\
-	tlbwe	%2,%3,%6\n\
-	tlbwe	%1,%3,%7\n\
-	tlbwe	%0,%3,%8"
+	__asm__ __volatile__(
+		"tlbwe	%2,%3,%4\n"
+		"tlbwe	%1,%3,%5\n"
+		"tlbwe	%0,%3,%6\n"
 	:
-	: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
-	  "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+	  "r" (phys),
+	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
+	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
 	  "i" (PPC44x_TLB_PAGEID),
 	  "i" (PPC44x_TLB_XLAT),
 	  "i" (PPC44x_TLB_ATTRIB));
 }
 
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
 void __init MMU_init_hw(void)
 {
 	flush_instruction_cache();
@@ -98,22 +60,13 @@ void __init MMU_init_hw(void)
 
 unsigned long __init mmu_mapin_ram(void)
 {
-	unsigned int pinned_tlbs = 1;
-	int i;
+	unsigned long addr;
 
-	/* Determine number of entries necessary to cover lowmem */
-	pinned_tlbs = (unsigned int)
-		(_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
-
-	/* Write upper watermark to save location */
-	tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
-
-	/* If necessary, set additional pinned TLBs */
-	if (pinned_tlbs > 1)
-		for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
-			unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
-			ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
-		}
+	/* Pin in enough TLBs to cover any lowmem not covered by the
+	 * initial 256M mapping established in head_44x.S */
+	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+	     addr += PPC_PIN_SIZE)
+		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
 
 	return total_lowmem;
 }
Index: working-2.6/arch/powerpc/mm/mmu_decl.h
===================================================================
--- working-2.6.orig/arch/powerpc/mm/mmu_decl.h	2007-02-28 16:49:19.000000000 +1100
+++ working-2.6/arch/powerpc/mm/mmu_decl.h	2007-02-28 16:49:20.000000000 +1100
@@ -35,8 +35,10 @@ extern int __map_without_bats;
 extern unsigned long ioremap_base;
 extern unsigned int rtas_data, rtas_size;
 
+#ifdef CONFIG_CLASSIC32
 extern PTE *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
+#endif /* CONFIG_CLASSIC32 */
 
 extern unsigned int num_tlbcam_entries;
 #endif
Index: working-2.6/arch/powerpc/kernel/head_44x.S
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/head_44x.S	2007-02-28 16:49:19.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/head_44x.S	2007-02-28 16:49:20.000000000 +1100
@@ -120,8 +120,8 @@ skpinv:	addi	r4,r4,1				/* Increment */
  * Configure and load pinned entry into TLB slot 63.
  */
 
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
+	lis	r3,PAGE_OFFSET@h
+	ori	r3,r3,PAGE_OFFSET@l
 
 	/* Kernel is at the base of RAM */
 	li r4, 0			/* Load the kernel physical address */
Index: working-2.6/include/asm-powerpc/mmu-44x/mmu.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/include/asm-powerpc/mmu-44x/mmu.h	2007-02-28 16:51:37.000000000 +1100
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_MMU_44X_MMU_H_
+#define _ASM_POWERPC_MMU_44X_MMU_H_
+
+/*
+ * PPC440 support
+ */
+#define PPC44x_MMUCR_TID	0x000000ff
+#define PPC44x_MMUCR_STS	0x00010000
+
+#define	PPC44x_TLB_PAGEID	0
+#define	PPC44x_TLB_XLAT		1
+#define	PPC44x_TLB_ATTRIB	2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
+#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
+#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
+#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
+#define PPC44x_TLB_4K		0x00000010
+#define PPC44x_TLB_16K		0x00000020
+#define PPC44x_TLB_64K		0x00000030
+#define PPC44x_TLB_256K		0x00000040
+#define PPC44x_TLB_1M		0x00000050
+#define PPC44x_TLB_16M		0x00000070
+#define	PPC44x_TLB_256M		0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
+#define	PPC44x_TLB_ERPN_MASK	0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK	0x0000ff80
+#define PPC44x_TLB_U0		0x00008000      /* User 0 */
+#define PPC44x_TLB_U1		0x00004000      /* User 1 */
+#define PPC44x_TLB_U2		0x00002000      /* User 2 */
+#define PPC44x_TLB_U3		0x00001000      /* User 3 */
+#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
+#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
+#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
+#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK	0x0000003f
+#define PPC44x_TLB_UX		0x00000020      /* User execution */
+#define PPC44x_TLB_UW		0x00000010      /* User write */
+#define PPC44x_TLB_UR		0x00000008      /* User read */
+#define PPC44x_TLB_SX		0x00000004      /* Super execution */
+#define PPC44x_TLB_SW		0x00000002      /* Super write */
+#define PPC44x_TLB_SR		0x00000001      /* Super read */
+
+/* Number of TLB entries */
+#define PPC44x_TLB_SIZE		64
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long long phys_addr_t;
+
+extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+#define PHYS_FMT	"%16Lx"
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* TLB entry offset/size used for pinning kernel lowmem */
+#define PPC44x_PIN_SHIFT	28
+#define PPC_PIN_SIZE		(1 << PPC44x_PIN_SHIFT)
+
+#define PPC44x_EARLY_TLBS	1
+
+#endif /* _ASM_POWERPC_MMU_44X_MMU_H_ */
+

Re: [PATCH 5/10] Port 44x MMU definitions to ARCH=powerpc

[Kumar Gala]

On Mar 22, 2007, at 4:22 AM, David Gibson wrote:

> This patch moves the mmu.h definitions which are still relevant for
> ARCH=powerpc from include/asm-ppc/mmu.h to their own file,
> include/asm-powerpc/mmu_44x.h.  The new file is included from
> asm-powerpc/mmu.h, and a couple of other tweaks to correct mmu
> definitions for 44x are made.
>
> Signed-off-by: David Gibson <dwg@au1.ibm.com>
> ---
>
>  arch/powerpc/kernel/head_44x.S    |    4 -
>  arch/powerpc/mm/44x_mmu.c         |   81 ++++++ 
> +-------------------------------
>  arch/powerpc/mm/mmu_decl.h        |    2
>  include/asm-powerpc/mmu-44x/mmu.h |   75 ++++++++++++++++++++++++++ 
> +++++++++
>  include/asm-powerpc/mmu.h         |   11 ++++-
>  5 files changed, 105 insertions(+), 68 deletions(-)

Any reason you are creating a new directory in include/asm-powerpc  
for 44x mmu defn?  why not just mmu_44x.h or something like that?

- k

Re: [PATCH 5/10] Port 44x MMU definitions to ARCH=powerpc

[David Gibson]

On Fri, Mar 23, 2007 at 09:09:11AM -0500, Kumar Gala wrote:
> 
> On Mar 22, 2007, at 4:22 AM, David Gibson wrote:
> 
> > This patch moves the mmu.h definitions which are still relevant for
> > ARCH=powerpc from include/asm-ppc/mmu.h to their own file,
> > include/asm-powerpc/mmu_44x.h.  The new file is included from
> > asm-powerpc/mmu.h, and a couple of other tweaks to correct mmu
> > definitions for 44x are made.
> >
> > Signed-off-by: David Gibson <dwg@au1.ibm.com>
> > ---
> >
> >  arch/powerpc/kernel/head_44x.S    |    4 -
> >  arch/powerpc/mm/44x_mmu.c         |   81 ++++++ 
> > +-------------------------------
> >  arch/powerpc/mm/mmu_decl.h        |    2
> >  include/asm-powerpc/mmu-44x/mmu.h |   75 ++++++++++++++++++++++++++ 
> > +++++++++
> >  include/asm-powerpc/mmu.h         |   11 ++++-
> >  5 files changed, 105 insertions(+), 68 deletions(-)
> 
> Any reason you are creating a new directory in include/asm-powerpc  
> for 44x mmu defn?  why not just mmu_44x.h or something like that?

Heh, Stephen asked me that too, in person.

Originally I did use mmu_44x.h, but I'm looking ahead.  In the middle
term, I want to purge the last dependencies on include/asm-ppc from
include/asm-powerpc, which currently includes all the mm headers:
mmu.h, pgtable.h, pgalloc.h, possibly a couple of others.

It seems most sensible to me to have a subdirectory for each mmu
family (32-bit has, 64-bit hash, 40x, 44x, FSL Book E, etc..) , with
the relevant version of each of these files.  This patch is a first
tiny step in that direction.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 6/10] Support for Ebony in arch/powerpc

[David Gibson]

This patch adds platform support code for the Ebony (440GP) evaluation
board.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/configs/ebony_defconfig  |  886 ++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_44x.S        |   10 
 arch/powerpc/platforms/4xx/44x.h      |    7 
 arch/powerpc/platforms/4xx/Makefile   |    3 
 arch/powerpc/platforms/4xx/ebony.c    |   72 ++
 arch/powerpc/platforms/4xx/misc_44x.S |   25 
 6 files changed, 992 insertions(+), 11 deletions(-)

Index: working-2.6/arch/powerpc/platforms/4xx/Makefile
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/4xx/Makefile	2006-12-08 10:42:48.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/4xx/Makefile	2007-03-21 15:03:03.000000000 +1100
@@ -1 +1,2 @@
-# empty makefile so make clean works
\ No newline at end of file
+obj-$(CONFIG_EBONY)	:= ebony.o
+obj-$(CONFIG_44x)	+= misc_44x.o
\ No newline at end of file
Index: working-2.6/arch/powerpc/platforms/4xx/ebony.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/platforms/4xx/ebony.c	2007-03-21 15:06:11.000000000 +1100
@@ -0,0 +1,72 @@
+/*
+ * Ebony board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/of_platform.h>
+
+#include "44x.h"
+
+static struct of_device_id ebony_of_bus[] = {
+	{ .type = "ibm,plb", },
+	{ .type = "ibm,opb", },
+	{},
+};
+
+static int __init ebony_device_probe(void)
+{
+	if (! machine_is(ebony))
+		return 0;
+
+	of_platform_bus_probe(NULL, ebony_of_bus, NULL);
+
+	return 0;
+}
+device_initcall(ebony_device_probe);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ebony_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "Ebony"))
+		return 0;
+
+	return 1;
+}
+
+static void __init ebony_setup_arch(void)
+{
+}
+
+define_machine(ebony) {
+	.name			= "Ebony",
+	.probe			= ebony_probe,
+	.setup_arch		= ebony_setup_arch,
+	.progress		= udbg_progress,
+	.init_IRQ		= uic_init_tree,
+	.get_irq		= uic_get_irq,
+	.restart		= ppc44x_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
Index: working-2.6/arch/powerpc/configs/ebony_defconfig
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/configs/ebony_defconfig	2007-03-21 15:03:03.000000000 +1100
@@ -0,0 +1,886 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-powerpc-emac-new-20070212.diff
+# Wed Feb 28 15:24:15 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_4xx=y
+
+#
+# AMCC 44x options
+#
+CONFIG_EBONY=y
+CONFIG_440GP=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_PC_KEYBOARD is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
Index: working-2.6/arch/powerpc/platforms/4xx/44x.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/platforms/4xx/44x.h	2007-03-21 15:06:03.000000000 +1100
@@ -0,0 +1,7 @@
+#ifndef __POWERPC_PLATFORMS_4XX_44X_H
+#define __POWERPC_PLATFORMS_4XX_44X_H
+
+extern void ppc44x_reset_system(char *cmd);
+
+#endif /* __POWERPC_PLATFORMS_4XX_44X_H */
+
Index: working-2.6/arch/powerpc/platforms/4xx/misc_44x.S
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/arch/powerpc/platforms/4xx/misc_44x.S	2007-03-21 15:06:03.000000000 +1100
@@ -0,0 +1,25 @@
+/*
+ * This file contains miscellaneous low-level functions for PPC 44x.
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+
+	.text
+
+/*
+ * void ppc44x_reset_system(char *cmd)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(ppc44x_reset_system)
+        mfspr   r13,SPRN_DBCR0
+        oris    r13,r13,DBCR0_RST_SYSTEM@h
+        mtspr   SPRN_DBCR0,r13
Index: working-2.6/arch/powerpc/kernel/head_44x.S
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/head_44x.S	2007-03-21 15:03:03.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/head_44x.S	2007-03-21 15:06:03.000000000 +1100
@@ -709,16 +709,6 @@ _GLOBAL(giveup_fpu)
 	blr
 #endif
 
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
 _GLOBAL(set_context)
 
 #ifdef CONFIG_BDI_SWITCH

[PATCH 3/10] Re-organize Kconfig code for 4xx in arch/powerpc

[David Gibson]

Now that we always take a device tree in arch/powerpc, there's no good
reason not to allow a single kernel to support multiple embedded 4xx
boards - the correct platform code can be selected based on the device
tree information.

Therefore, this patch re-arranges the 4xx Kconfig code to allow this.
In addition we:
	- use "select" instead of depends to configure the correct
	  config options for specific 4xx CPUs and workarounds, which
	  makes the information about specific boards and CPUs less
	  scattered.
	- Some old, unused (in arch/powerpc) config options are
	  removed: WANT_EARLY_SERIAL, IBM_OCP, etc.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 arch/powerpc/platforms/4xx/Kconfig |  378 ++++++++++++++-----------------------
 1 file changed, 153 insertions(+), 225 deletions(-)

Index: working-2.6/arch/powerpc/platforms/4xx/Kconfig
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/4xx/Kconfig	2007-02-21 11:20:50.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/4xx/Kconfig	2007-02-21 11:25:43.000000000 +1100
@@ -3,278 +3,206 @@ config 4xx
 	depends on 40x || 44x
 	default y
 
-config WANT_EARLY_SERIAL
+config BOOKE
 	bool
-	select SERIAL_8250
-	default n
-
-menu "AMCC 4xx options"
-	depends on 4xx
-
-choice
-	prompt "Machine Type"
-	depends on 40x
-	default WALNUT
-
-config BUBINGA
-	bool "Bubinga"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-	bool "CPCI405"
-	help
-	  This option enables support for the CPCI405 board.
-
-config EP405
-	bool "EP405/EP405PC"
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-	bool "Redwood-5"
-	help
-	  This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-	bool "Redwood-6"
-	help
-	  This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-	bool "Sycamore"
-	help
-	  This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-	bool "Walnut"
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-	bool "Xilinx-ML300"
-	help
-	  This option enables support for the Xilinx ML300 evaluation board.
-
-endchoice
-
-choice
-	prompt "Machine Type"
 	depends on 44x
-	default EBONY
-
-config BAMBOO
-	bool "Bamboo"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-	bool "Luan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440SP evaluation board.
-
-config OCOTEA
-	bool "Ocotea"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GX evaluation board.
+	default y
 
-endchoice
+menu "AMCC 40x options"
+	depends on 40x
 
-config EP405PC
-	bool "EP405PC Support"
-	depends on EP405
+#config BUBINGA
+#	bool "Bubinga"
+#	depends on 40x
+#	default n
+#	select 405EP
+#	help
+#	  This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+#	bool "CPCI405"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the CPCI405 board.
+
+#config EP405
+#	bool "EP405/EP405PC"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+#	bool "EP405PC Support"
+#	depends on EP405
+#	default y
+#	help
+#	  This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+#	bool "Redwood-5"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+#	bool "Redwood-6"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+#	bool "Sycamore"
+#	depends on 40x
+#	default n
+#	select 405GPR
+#	help
+#	  This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+#	bool "Walnut"
+#	depends on 40x
+#	default y
+#	select 405GP
+#	help
+#	  This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+#	bool "Xilinx-ML300"
+#	depends on 40x
+#	default y
+#	select VIRTEX_II_PRO
+#	help
+#	  This option enables support for the Xilinx ML300 evaluation board.
 
+endmenu
 
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
+# 40x specific CPU modules, selected based on the board above.
 config NP405H
 	bool
-	depends on ASH
-	default y
+	#depends on ASH
 
-config 440EP
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
 	bool
-	depends on BAMBOO
-	select PPC_FPU
-	default y
+	#depends on OAK
+	select IBM405_ERR51
 
-config 440GP
+config 405GP
 	bool
-	depends on EBONY
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config 440GX
+config 405EP
 	bool
-	depends on OCOTEA
-	default y
 
-config 440SP
+config 405GPR
 	bool
-	depends on LUAN
-	default y
 
-config 440
+config VIRTEX_II_PRO
 	bool
-	depends on 440GP || 440SP || 440EP
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config 440A
+config STB03xxx
 	bool
-	depends on 440GX
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config IBM440EP_ERR42
-	bool
-	depends on 440EP
-	default y
+# 40x errata/workaround config symbols, selected by the CPU models above
 
 # All 405-based cores up until the 405GPR and 405EP have this errata.
 config IBM405_ERR77
 	bool
-	depends on 40x && !403GCX && !405GPR && !405EP
-	default y
 
 # All 40x-based cores, up until the 405GPR and 405EP have this errata.
 config IBM405_ERR51
 	bool
-	depends on 40x && !405GPR && !405EP
-	default y
 
-config BOOKE
-	bool
+menu "AMCC 44x options"
 	depends on 44x
-	default y
 
-config IBM_OCP
-	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-	default y
+#config BAMBOO
+#	bool "Bamboo"
+#	depends on 44x
+#	default n
+#	select 440EP
+#	help
+#	  This option enables support for the IBM PPC440EP evaluation board.
 
-config XILINX_OCP
-	bool
-	depends on XILINX_ML300
-	default y
-
-config IBM_EMAC4
-	bool
-	depends on 440GX || 440SP
-	default y
-
-config BIOS_FIXUP
-	bool
-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-	default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	depends on OAK
-	default y
-
-config 405EP
-	bool
-	depends on BUBINGA
-	default y
-
-config 405GP
-	bool
-	depends on CPCI405 || EP405 || WALNUT
-	default y
-
-config 405GPR
-	bool
-	depends on SYCAMORE
-	default y
-
-config VIRTEX_II_PRO
-	bool
-	depends on XILINX_ML300
-	default y
-
-config STB03xxx
-	bool
-	depends on REDWOOD_5 || REDWOOD_6
-	default y
-
-config EMBEDDEDBOOT
-	bool
-	depends on EP405 || XILINX_ML300
+config EBONY
+	bool "Ebony"
+	depends on 44x
 	default y
+	select 440GP
+	help
+	  This option enables support for the IBM PPC440GP evaluation board.
 
-config IBM_OPENBIOS
-	bool
-	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-	default y
+#config LUAN
+#	bool "Luan"
+#	depends on 44x
+#	default n
+#	select 440SP
+#	help
+#	  This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+#	bool "Ocotea"
+#	depends on 44x
+#	default n
+#	select 440GX
+#	help
+#	  This option enables support for the IBM PPC440GX evaluation board.
 
-config PPC4xx_DMA
-	bool "PPC4xx DMA controller support"
-	depends on 4xx
+endmenu
 
-config PPC4xx_EDMA
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
 	bool
-	depends on !STB03xxx && PPC4xx_DMA
-	default y
+	select PPC_FPU
+	select IBM440EP_ERR42
 
-config PPC_GEN550
+config 440GP
 	bool
-	depends on 4xx
-	default y
-
-choice
-	prompt "TTYS0 device and default console"
-	depends on 40x
-	default UART0_TTYS0
-
-config UART0_TTYS0
-	bool "UART0"
-
-config UART0_TTYS1
-	bool "UART1"
+	select IBM_NEW_EMAC_ZMII
 
-endchoice
-
-config SERIAL_SICC
-	bool "SICC Serial port support"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440GX
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
 
-config SERIAL_SICC_CONSOLE
+config 440SP
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-endmenu
-
 
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440A
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
+	depends on 440GX
 	default y
 
-config SERIAL_SICC_CONSOLE
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
 
-endmenu
+#config XILINX_OCP
+#	bool
+#	depends on XILINX_ML300
+#	default y
+
+#config BIOS_FIXUP
+#	bool
+#	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+#	default y
+
+#config PPC4xx_DMA
+#	bool "PPC4xx DMA controller support"
+#	depends on 4xx
+
+#config PPC4xx_EDMA
+#	bool
+#	depends on !STB03xxx && PPC4xx_DMA
+#	default y

[PATCH 2/10] Use resource_size_t for serial port IO addresses

[David Gibson]

At present, various parts of the serial code use unsigned long to
define resource addresses.  This is a problem, because some 32-bit
platforms have physical addresses larger than 32-bits, and have mmio
serial uarts located above the 4GB point.

This patch changes the type of mapbase in both struct uart_port and
struct plat_serial8250_port to resource_size_t, which can be
configured to be 64 bits on such platforms.  The mapbase in
serial_struct can't safely be changed, because that structure is user
visible.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
---

 drivers/serial/8250.c        |    5 +++--
 drivers/serial/8250_early.c  |   16 +++++++++-------
 drivers/serial/serial_core.c |    9 +++++----
 include/linux/serial_8250.h  |    2 +-
 include/linux/serial_core.h  |    2 +-
 5 files changed, 19 insertions(+), 15 deletions(-)

Index: working-2.6/include/linux/serial_core.h
===================================================================
--- working-2.6.orig/include/linux/serial_core.h	2007-02-19 11:07:42.000000000 +1100
+++ working-2.6/include/linux/serial_core.h	2007-02-19 11:07:43.000000000 +1100
@@ -273,7 +273,7 @@ struct uart_port {
 	const struct uart_ops	*ops;
 	unsigned int		custom_divisor;
 	unsigned int		line;			/* port index */
-	unsigned long		mapbase;		/* for ioremap */
+	resource_size_t		mapbase;		/* for ioremap */
 	struct device		*dev;			/* parent device */
 	unsigned char		hub6;			/* this should be in the 8250 driver */
 	unsigned char		unused[3];
Index: working-2.6/drivers/serial/serial_core.c
===================================================================
--- working-2.6.orig/drivers/serial/serial_core.c	2007-02-19 11:07:42.000000000 +1100
+++ working-2.6/drivers/serial/serial_core.c	2007-02-19 11:07:43.000000000 +1100
@@ -633,7 +633,7 @@ static int uart_get_info(struct uart_sta
 	tmp.hub6	    = port->hub6;
 	tmp.io_type         = port->iotype;
 	tmp.iomem_reg_shift = port->regshift;
-	tmp.iomem_base      = (void *)port->mapbase;
+	tmp.iomem_base      = (void *)(unsigned long)port->mapbase;
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -1673,10 +1673,11 @@ static int uart_line_info(char *buf, str
 		return 0;
 
 	mmio = port->iotype >= UPIO_MEM;
-	ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
+	ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
 			port->line, uart_type(port),
 			mmio ? "mmio:0x" : "port:",
-			mmio ? port->mapbase : (unsigned long) port->iobase,
+			mmio ? (unsigned long long)port->mapbase
+		             : (unsigned long long) port->iobase,
 			port->irq);
 
 	if (port->type == PORT_UNKNOWN) {
@@ -2069,7 +2070,7 @@ uart_report_port(struct uart_driver *drv
 	case UPIO_AU:
 	case UPIO_TSI:
 		snprintf(address, sizeof(address),
-			 "MMIO 0x%lx", port->mapbase);
+			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
 		break;
 	default:
 		strlcpy(address, "*unknown*", sizeof(address));
Index: working-2.6/drivers/serial/8250_early.c
===================================================================
--- working-2.6.orig/drivers/serial/8250_early.c	2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/drivers/serial/8250_early.c	2007-02-19 11:07:43.000000000 +1100
@@ -145,8 +145,9 @@ static int __init parse_options(struct e
 		port->mapbase = simple_strtoul(options + 5, &options, 0);
 		port->membase = ioremap(port->mapbase, mapsize);
 		if (!port->membase) {
-			printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
-				__FUNCTION__, port->mapbase);
+			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
+				__FUNCTION__,
+			       (unsigned long long)port->mapbase);
 			return -ENOMEM;
 		}
 		mmio = 1;
@@ -168,9 +169,10 @@ static int __init parse_options(struct e
 			device->baud);
 	}
 
-	printk(KERN_INFO "Early serial console at %s 0x%lx (options '%s')\n",
+	printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
 		mmio ? "MMIO" : "I/O port",
-		mmio ? port->mapbase : (unsigned long) port->iobase,
+		mmio ? (unsigned long long) port->mapbase
+	             : (unsigned long long) port->iobase,
 		device->options);
 	return 0;
 }
@@ -236,10 +238,10 @@ static int __init early_uart_console_swi
 	mmio = (port->iotype == UPIO_MEM);
 	line = serial8250_start_console(port, device->options);
 	if (line < 0)
-		printk("No ttyS device at %s 0x%lx for console\n",
+		printk("No ttyS device at %s 0x%llx for console\n",
 			mmio ? "MMIO" : "I/O port",
-			mmio ? port->mapbase :
-			    (unsigned long) port->iobase);
+			mmio ? (unsigned long long) port->mapbase
+		             : (unsigned long long) port->iobase);
 
 	unregister_console(&early_uart_console);
 	if (mmio)
Index: working-2.6/include/linux/serial_8250.h
===================================================================
--- working-2.6.orig/include/linux/serial_8250.h	2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/include/linux/serial_8250.h	2007-02-19 11:07:43.000000000 +1100
@@ -20,7 +20,7 @@
 struct plat_serial8250_port {
 	unsigned long	iobase;		/* io base address */
 	void __iomem	*membase;	/* ioremap cookie or NULL */
-	unsigned long	mapbase;	/* resource base */
+	resource_size_t	mapbase;	/* resource base */
 	unsigned int	irq;		/* interrupt number */
 	unsigned int	uartclk;	/* UART clock rate */
 	unsigned char	regshift;	/* register shift */
Index: working-2.6/drivers/serial/8250.c
===================================================================
--- working-2.6.orig/drivers/serial/8250.c	2007-02-19 11:07:40.000000000 +1100
+++ working-2.6/drivers/serial/8250.c	2007-02-19 11:07:43.000000000 +1100
@@ -2550,8 +2550,9 @@ static int __devinit serial8250_probe(st
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
-				"(IO%lx MEM%lx IRQ%d): %d\n", i,
-				p->iobase, p->mapbase, p->irq, ret);
+				"(IO%lx MEM%llx IRQ%d): %d\n", i,
+				p->iobase, (unsigned long long)p->mapbase,
+				p->irq, ret);
 		}
 	}
 	return 0;