From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 2/2] powerpc: Alignment exception uses __get/put_user_inatomic
Date: Wed, 11 Apr 2007 16:13:19 +1000 [thread overview]
Message-ID: <20070411061756.3DD1CDDF16@ozlabs.org> (raw)
Make the alignment exception handler use the new _inatomic variants
of __get/put_user. This fixes erroneous warnings in the very rare
cases where we manage to have copy_tofrom_user_inatomic() trigger
an alignment exception.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/kernel/align.c | 56 ++++++++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 25 deletions(-)
Index: linux-work/arch/powerpc/kernel/align.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/align.c 2007-04-11 10:23:41.000000000 +1000
+++ linux-work/arch/powerpc/kernel/align.c 2007-04-11 10:24:43.000000000 +1000
@@ -241,7 +241,7 @@
if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
return -EFAULT;
for (i = 0; i < size / sizeof(long); ++i)
- if (__put_user(0, p+i))
+ if (__put_user_inatomic(0, p+i))
return -EFAULT;
return 1;
}
@@ -288,7 +288,8 @@
} else {
unsigned long pc = regs->nip ^ (swiz & 4);
- if (__get_user(instr, (unsigned int __user *)pc))
+ if (__get_user_inatomic(instr,
+ (unsigned int __user *)pc))
return -EFAULT;
if (swiz == 0 && (flags & SW))
instr = cpu_to_le32(instr);
@@ -324,27 +325,31 @@
((nb0 + 3) / 4) * sizeof(unsigned long));
for (i = 0; i < nb; ++i, ++p)
- if (__get_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
+ if (__get_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = ®s->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i, ++p)
- if (__get_user(REG_BYTE(rptr, i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__get_user_inatomic(REG_BYTE(rptr,
+ i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
}
} else {
for (i = 0; i < nb; ++i, ++p)
- if (__put_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
+ if (__put_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = ®s->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i, ++p)
- if (__put_user(REG_BYTE(rptr, i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__put_user_inatomic(REG_BYTE(rptr,
+ i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
}
}
@@ -398,7 +403,8 @@
if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE))
pc ^= 4;
- if (unlikely(__get_user(instr, (unsigned int __user *)pc)))
+ if (unlikely(__get_user_inatomic(instr,
+ (unsigned int __user *)pc)))
return -EFAULT;
if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
instr = cpu_to_le32(instr);
@@ -474,16 +480,16 @@
p = (unsigned long) addr;
switch (nb) {
case 8:
- ret |= __get_user(data.v[0], SWIZ_PTR(p++));
- ret |= __get_user(data.v[1], SWIZ_PTR(p++));
- ret |= __get_user(data.v[2], SWIZ_PTR(p++));
- ret |= __get_user(data.v[3], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[0], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[1], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[2], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[3], SWIZ_PTR(p++));
case 4:
- ret |= __get_user(data.v[4], SWIZ_PTR(p++));
- ret |= __get_user(data.v[5], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[4], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[5], SWIZ_PTR(p++));
case 2:
- ret |= __get_user(data.v[6], SWIZ_PTR(p++));
- ret |= __get_user(data.v[7], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[6], SWIZ_PTR(p++));
+ ret |= __get_user_inatomic(data.v[7], SWIZ_PTR(p++));
if (unlikely(ret))
return -EFAULT;
}
@@ -551,16 +557,16 @@
p = (unsigned long) addr;
switch (nb) {
case 8:
- ret |= __put_user(data.v[0], SWIZ_PTR(p++));
- ret |= __put_user(data.v[1], SWIZ_PTR(p++));
- ret |= __put_user(data.v[2], SWIZ_PTR(p++));
- ret |= __put_user(data.v[3], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[0], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[1], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[2], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[3], SWIZ_PTR(p++));
case 4:
- ret |= __put_user(data.v[4], SWIZ_PTR(p++));
- ret |= __put_user(data.v[5], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[4], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[5], SWIZ_PTR(p++));
case 2:
- ret |= __put_user(data.v[6], SWIZ_PTR(p++));
- ret |= __put_user(data.v[7], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[6], SWIZ_PTR(p++));
+ ret |= __put_user_inatomic(data.v[7], SWIZ_PTR(p++));
}
if (unlikely(ret))
return -EFAULT;
reply other threads:[~2007-04-11 6:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070411061756.3DD1CDDF16@ozlabs.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).