From: Mohan Kumar M <mohan@in.ibm.com>
To: Michael Ellerman <michael@ellerman.id.au>
Cc: ppcdev <linuxppc-dev@ozlabs.org>,
Paul Mackerras <paulus@samba.org>,
Anton Blanchard <anton@samba.org>,
Milton Miller <miltonm@bga.com>,
fastboot@lists.osdl.org
Subject: Re: [PATCH] Fix interrupt distribution in ppc970
Date: Thu, 19 Apr 2007 17:22:33 +0530 [thread overview]
Message-ID: <20070419115233.GA4172@in.ibm.com> (raw)
In-Reply-To: <1176254201.4815.14.camel@concordia.ozlabs.ibm.com>
On Wed, Apr 11, 2007 at 11:16:41AM +1000, Michael Ellerman wrote:
> On Tue, 2007-04-10 at 11:59 -0500, Milton Miller wrote:
> >
> > This means we are doing population counts of two masks, when we really
> > just care that they are the same. How about using
> > cpus_equal(cpu_online_mask, cpu_present_mask)?
>
> Yep that's sensible.
>
> > This shows how close these two functions are. The difference is
> > what happens when cpus_empty is true -- we default in one and
> > ignore in the other.
> >
> > How about adding another arg to get_server, that says to fail
> > or default for the empty case, with failure being -1?
> >
> > I'll try to code this up, but it might be a day or two until i get
> > the time.
I modified the patch based on suggestions given by Milton and Mike.
Milton is this patch okay?
Tested on 2.6.21-rc7.
=====
It is observed that in some PPC970 based machines, When the kernel is
booted with maxcpus=1, interrupts were distributed to non online cpus
also. So a condition is included to check whether the cpu online
map and cpu present map are equal or not. If they are equal
default_distrib_server is used as the interrupt server otherwise
default_server(ie boot cpu) is used as the interrupt server.
In addition to this, if an interrupt is assigned to a specific cpu (ie
smp affinity) and if that cpu is not online, the earlier code used to
return the default_distrib_server as interrupt server. This patch
introduces an additional parameter to the get_irq function ie
strict_check, based on this parameter, if the cpu is not online either
default_distrib_server or -1 is returned.
Cc: Milton Miller <miltonm@bga.com>,
Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Mohan Kumar M <mohan@in.ibm.com>
---
arch/powerpc/platforms/pseries/xics.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
Index: linux-2.6.21-rc4/arch/powerpc/platforms/pseries/xics.c
===================================================================
--- linux-2.6.21-rc4.orig/arch/powerpc/platforms/pseries/xics.c
+++ linux-2.6.21-rc4/arch/powerpc/platforms/pseries/xics.c
@@ -156,9 +156,9 @@ static inline void lpar_qirr_info(int n_
#ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq)
+static int get_irq_server(unsigned int virq, unsigned int strict_check)
{
- unsigned int server;
+ int server;
/* For the moment only implement delivery to all cpus or one cpu */
cpumask_t cpumask = irq_desc[virq].affinity;
cpumask_t tmp = CPU_MASK_NONE;
@@ -167,21 +167,25 @@ static int get_irq_server(unsigned int v
return default_server;
if (cpus_equal(cpumask, CPU_MASK_ALL)) {
- server = default_distrib_server;
+ if (cpus_equal(cpu_online_map, cpu_present_map))
+ server = default_distrib_server;
+ else
+ server = default_server;
} else {
cpus_and(tmp, cpu_online_map, cpumask);
- if (cpus_empty(tmp))
+ if (cpus_empty(tmp) && !strict_check)
server = default_distrib_server;
+ else if(cpus_empty(tmp) && strict_check)
+ server = -1;
else
server = get_hard_smp_processor_id(first_cpu(tmp));
}
return server;
-
}
#else
-static int get_irq_server(unsigned int virq)
+static int get_irq_server(unsigned int virq, unsigned int strict_check)
{
return default_server;
}
@@ -192,7 +196,7 @@ static void xics_unmask_irq(unsigned int
{
unsigned int irq;
int call_status;
- unsigned int server;
+ int server;
pr_debug("xics: unmask virq %d\n", virq);
@@ -201,7 +205,7 @@ static void xics_unmask_irq(unsigned int
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
return;
- server = get_irq_server(virq);
+ server = get_irq_server(virq, 0);
call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
DEFAULT_PRIORITY);
@@ -415,7 +419,10 @@ static void xics_set_affinity(unsigned i
/* For the moment only implement delivery to all cpus or one cpu */
if (cpus_equal(cpumask, CPU_MASK_ALL)) {
- newmask = default_distrib_server;
+ if (cpus_equal(cpu_online_map, cpu_present_map))
+ newmask = default_distrib_server;
+ else
+ newmask = default_server;
} else {
cpus_and(tmp, cpu_online_map, cpumask);
if (cpus_empty(tmp))
next prev parent reply other threads:[~2007-04-19 11:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-08 4:55 [PATCH] Fix interrupt distribution in ppc970 Mohan Kumar M
2006-12-18 4:37 ` Paul Mackerras
2006-12-18 5:14 ` Mohan Kumar M
2006-12-18 10:57 ` Mohan Kumar M
2007-01-02 11:42 ` [Fastboot] " Mohan Kumar M
2007-01-02 15:07 ` Doug Maxey
2007-03-06 13:57 ` Mohan Kumar M
2007-03-06 14:16 ` Michael Ellerman
2007-03-06 16:55 ` Mohan Kumar M
2007-03-06 17:37 ` Michael Ellerman
2007-03-07 4:53 ` Mohan Kumar M
2007-03-07 10:52 ` Michael Ellerman
2007-04-09 8:57 ` Mohan Kumar M
2007-04-10 7:06 ` Michael Ellerman
2007-04-10 12:54 ` Mohan Kumar M
2007-04-10 16:59 ` Milton Miller
2007-04-11 1:16 ` Michael Ellerman
2007-04-19 11:52 ` Mohan Kumar M [this message]
2007-04-20 5:45 ` Milton Miller
2007-04-26 9:24 ` Mohan Kumar M
2007-04-26 14:42 ` Milton Miller
2007-05-03 14:47 ` Mohan Kumar M
2007-05-06 6:52 ` Milton Miller
2007-06-04 10:54 ` Mohan Kumar M
2007-06-06 9:43 ` Milton Miller
2007-06-06 11:31 ` Mohan Kumar M
2007-06-11 1:58 ` Milton Miller
2007-06-11 18:07 ` Mohan Kumar M
2007-06-12 14:51 ` Mohan Kumar M
2007-06-15 16:35 ` Milton Miller
2007-03-07 6:06 ` [Fastboot] " Vivek Goyal
2007-03-07 10:46 ` Michael Ellerman
2007-03-06 22:05 ` Nathan Lynch
2007-03-07 5:01 ` Mohan Kumar M
2007-03-07 8:52 ` Benjamin Herrenschmidt
2007-03-07 9:10 ` Mohan Kumar M
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070419115233.GA4172@in.ibm.com \
--to=mohan@in.ibm.com \
--cc=anton@samba.org \
--cc=fastboot@lists.osdl.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=michael@ellerman.id.au \
--cc=miltonm@bga.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).