From: Stefan Roese <sr@denx.de>
To: linuxppc-embedded@ozlabs.org
Cc: Leonid <Leonid@a-k-a.net>, Frank Prepelica <Frank.Prepelica@ubidyne.com>
Subject: Re: BDI2000 configuration file for MPC8313E-RDB
Date: Fri, 18 May 2007 21:04:09 +0200 [thread overview]
Message-ID: <200705182104.09993.sr@denx.de> (raw)
In-Reply-To: <406A31B117F2734987636D6CCC93EE3C017BA668@ehost011-3.exch011.intermedia.net>
On Friday 18 May 2007, Leonid wrote:
> See, it's not a question that BDI2000 can be used with board which has
> NAND flash on it, just it's not capable of NAND direct programming as it
> does in the case of NOR flash.
Yes, "direct" NAND programming via BDI2000 is not possible. At least not at
the moment with the current firmware versions.
> I also have AMCC Sequoia board with both NOR and NAND flash. On this
> board you can boot u-boot from NOR first and use it to program NAND.
Correct.
Just a side note: You can also boot the Sequoia from NAND directly if you have
programmed the NAND U-Boot version for the Sequoia, as the 440EP(x) supports
direct NAND booting.
Best regards,
Stefan
next prev parent reply other threads:[~2007-05-18 19:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-18 6:00 AW: BDI2000 configuration file for MPC8313E-RDB Frank Prepelica
2007-05-18 16:54 ` Leonid
2007-05-18 19:04 ` Stefan Roese [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-05-29 10:08 Frank Prepelica
2007-05-21 7:25 Frank Prepelica
2007-05-21 15:27 ` Leonid
2007-05-16 14:25 Frank Prepelica
2007-05-16 20:37 ` Leonid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200705182104.09993.sr@denx.de \
--to=sr@denx.de \
--cc=Frank.Prepelica@ubidyne.com \
--cc=Leonid@a-k-a.net \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).