* Re: 2.6.22-rc3-mm1 [not found] <20070530235823.793f00d9.akpm@linux-foundation.org> @ 2007-05-31 20:43 ` Mariusz Kozlowski 2007-05-31 21:19 ` 2.6.22-rc3-mm1 Andrew Morton 0 siblings, 1 reply; 9+ messages in thread From: Mariusz Kozlowski @ 2007-05-31 20:43 UTC (permalink / raw) To: Andrew Morton, linuxppc-dev, paulus, Arnd Bergmann; +Cc: linux-kernel Hello This is from iMac G3. The spufs_mem_mmap_fault() code looks bad in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find the patch to blame hmm. arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault': arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1 make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2 make[1]: *** [arch/powerpc/platforms/cell] Blad 2 Regards, Mariusz ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-05-31 20:43 ` 2.6.22-rc3-mm1 Mariusz Kozlowski @ 2007-05-31 21:19 ` Andrew Morton 2007-06-01 20:50 ` 2.6.22-rc3-mm1 Mariusz Kozlowski 0 siblings, 1 reply; 9+ messages in thread From: Andrew Morton @ 2007-05-31 21:19 UTC (permalink / raw) To: Mariusz Kozlowski Cc: linuxppc-dev, paulus, Arnd Bergmann, Nick Piggin, linux-kernel On Thu, 31 May 2007 22:43:18 +0200 Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote: > Hello > > This is from iMac G3. The spufs_mem_mmap_fault() code looks bad > in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find > the patch to blame hmm. > > arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault': > arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) > arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once > arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) > arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' > arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' > make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1 > make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2 > make[1]: *** [arch/powerpc/platforms/cell] Blad 2 > Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt to fix them when spufs changed. I suppose I'll have a poke at it next time I get the powerpc machine fired up. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-05-31 21:19 ` 2.6.22-rc3-mm1 Andrew Morton @ 2007-06-01 20:50 ` Mariusz Kozlowski 2007-06-01 21:02 ` 2.6.22-rc3-mm1 Andrew Morton 0 siblings, 1 reply; 9+ messages in thread From: Mariusz Kozlowski @ 2007-06-01 20:50 UTC (permalink / raw) To: Andrew Morton Cc: linuxppc-dev, paulus, Arnd Bergmann, Nick Piggin, linux-kernel > > This is from iMac G3. The spufs_mem_mmap_fault() code looks bad > > in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find > > the patch to blame hmm. > > > > arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault': > > arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) > > arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once > > arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) > > arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' > > arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' > > make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1 > > make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2 > > make[1]: *** [arch/powerpc/platforms/cell] Blad 2 > > > > Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt > to fix them when spufs changed. I suppose I'll have a poke at it next time > I get the powerpc machine fired up. I #if 0'ed that piece of code inside spufs_mem_mmap_fault() and run make again. This is 'make allmodconfig && make' result: ERROR: ".ps3av_set_hdr" [drivers/ps3/ps3av_cmd.ko] undefined! ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined! ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined! ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined! ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined! ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined! ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined! ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined! ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined! ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined! ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined! ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined! ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined! ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! make[1]: *** [__modpost] Blad 1 make: *** [modules] Blad 2 Regards, Mariusz ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-01 20:50 ` 2.6.22-rc3-mm1 Mariusz Kozlowski @ 2007-06-01 21:02 ` Andrew Morton 2007-06-01 21:21 ` 2.6.22-rc3-mm1 Mariusz Kozlowski ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Andrew Morton @ 2007-06-01 21:02 UTC (permalink / raw) To: Mariusz Kozlowski Cc: linuxppc-dev, paulus, Arnd Bergmann, Nick Piggin, linux-kernel On Fri, 1 Jun 2007 22:50:58 +0200 Mariusz Kozlowski <m.kozlowski@tuxland.pl> wrote: > > > This is from iMac G3. The spufs_mem_mmap_fault() code looks bad > > > in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find > > > the patch to blame hmm. > > > > > > arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault': > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) > > > arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' > > > arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' > > > make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1 > > > make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2 > > > make[1]: *** [arch/powerpc/platforms/cell] Blad 2 > > > > > > > Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt > > to fix them when spufs changed. I suppose I'll have a poke at it next time > > I get the powerpc machine fired up. > > I #if 0'ed that piece of code inside spufs_mem_mmap_fault() and run make again. > This is 'make allmodconfig && make' result: > > ERROR: ".ps3av_set_hdr" [drivers/ps3/ps3av_cmd.ko] undefined! > ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined! > ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined! > ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined! > ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined! > ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined! > ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined! > ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined! > ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined! > ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined! > ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined! > ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined! > ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined! > ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! > make[1]: *** [__modpost] Blad 1 > make: *** [modules] Blad 2 > Yeah, allmodconfig tends to fall over in a heap on a lot of the less-lavishly-maintained architectures. If any of these are specific to -mm then I guess we should fix them up, prevent the kernel from actually going backwards. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-01 21:02 ` 2.6.22-rc3-mm1 Andrew Morton @ 2007-06-01 21:21 ` Mariusz Kozlowski 2007-06-04 2:29 ` 2.6.22-rc3-mm1 Michael Ellerman 2007-06-01 23:30 ` 2.6.22-rc3-mm1 Benjamin Herrenschmidt 2007-06-02 8:40 ` 2.6.22-rc3-mm1 Segher Boessenkool 2 siblings, 1 reply; 9+ messages in thread From: Mariusz Kozlowski @ 2007-06-01 21:21 UTC (permalink / raw) To: Andrew Morton Cc: linuxppc-dev, paulus, Arnd Bergmann, Nick Piggin, linux-kernel > > > > This is from iMac G3. The spufs_mem_mmap_fault() code looks bad > > > > in arch/powerpc/platforms/cell/spufs/file.c but somehow I'm unable to find > > > > the patch to blame hmm. > > > > > > > > arch/powerpc/platforms/cell/spufs/file.c: In function 'spufs_mem_mmap_fault': > > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: 'address' undeclared (first use in this function) > > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: (Each undeclared identifier is reported only once > > > > arch/powerpc/platforms/cell/spufs/file.c:122: error: for each function it appears in.) > > > > arch/powerpc/platforms/cell/spufs/file.c:141: error: expected ';' before 'if' > > > > arch/powerpc/platforms/cell/spufs/file.c:122: warning: unused variable 'addr0' > > > > make[3]: *** [arch/powerpc/platforms/cell/spufs/file.o] Blad 1 > > > > make[2]: *** [arch/powerpc/platforms/cell/spufs] Blad 2 > > > > make[1]: *** [arch/powerpc/platforms/cell] Blad 2 > > > > > > > > > > Yeah, that's the fix-fault-vs-invalidate-race patches, or my poor attempt > > > to fix them when spufs changed. I suppose I'll have a poke at it next time > > > I get the powerpc machine fired up. > > > > I #if 0'ed that piece of code inside spufs_mem_mmap_fault() and run make again. > > This is 'make allmodconfig && make' result: > > > > ERROR: ".ps3av_set_hdr" [drivers/ps3/ps3av_cmd.ko] undefined! > > ERROR: ".ps3av_do_pkt" [drivers/ps3/ps3av_cmd.ko] undefined! > > ERROR: ".ps3_vuart_write" [drivers/ps3/ps3av_cmd.ko] undefined! > > ERROR: ".ps3_vuart_read" [drivers/ps3/ps3av_cmd.ko] undefined! > > ERROR: ".ps3av_cmd_fin" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_video_disable_sig" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_set_video_mode" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_video_get_monitor_info" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_audio_active" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_set_audio_mode" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_set_av_audio_param" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_vuart_read" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_get_hw_conf" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_video_mute" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_tv_mute" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_audio_mode" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_hdmi_mode" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_set_av_video_cs" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_vuart_write" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_audio_mute" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_avb_param" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_init" [drivers/ps3/ps3av.ko] undefined! > > ERROR: ".ps3av_cmd_av_audio_mute" [drivers/ps3/ps3av.ko] undefined! > > ERROR: "pmu_batteries" [drivers/power/pmu_battery.ko] undefined! > > ERROR: "pmu_battery_count" [drivers/power/pmu_battery.ko] undefined! > > ERROR: "pmu_power_flags" [drivers/power/pmu_battery.ko] undefined! > > ERROR: "irq_map" [drivers/net/pasemi_mac.ko] undefined! > > ERROR: "pmu_batteries" [drivers/macintosh/apm_emu.ko] undefined! > > ERROR: "pmu_battery_count" [drivers/macintosh/apm_emu.ko] undefined! > > ERROR: "pmu_power_flags" [drivers/macintosh/apm_emu.ko] undefined! > > ERROR: ".cpufreq_set_policy" [arch/powerpc/platforms/cell/cbe_cpufreq.ko] undefined! > > make[1]: *** [__modpost] Blad 1 > > make: *** [modules] Blad 2 > > > > Yeah, allmodconfig tends to fall over in a heap on a lot of the > less-lavishly-maintained architectures. If any of these are specific to > -mm then I guess we should fix them up, prevent the kernel from actually > going backwards. I recall compiling earlier versions of -mm on this iMac just fine a few months ago. Now it looks like a bunch of new warnings appeared and if fails to compile for various reasons in different places. I'm thinking of running -mm in next few days so maybe something interesting will come up :-) BTW. This is 'make allnoconfig && make' result: MODPOST vmlinux ln: accessing `arch/powerpc/boot/zImage': No such file or directory make[1]: *** [arch/powerpc/boot/zImage] Error 1 make: *** [zImage] Error 2 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-01 21:21 ` 2.6.22-rc3-mm1 Mariusz Kozlowski @ 2007-06-04 2:29 ` Michael Ellerman 2007-06-04 8:35 ` 2.6.22-rc3-mm1 Segher Boessenkool 0 siblings, 1 reply; 9+ messages in thread From: Michael Ellerman @ 2007-06-04 2:29 UTC (permalink / raw) To: Mariusz Kozlowski; +Cc: linuxppc-dev, Andrew Morton [-- Attachment #1: Type: text/plain, Size: 857 bytes --] On Fri, 2007-06-01 at 23:21 +0200, Mariusz Kozlowski wrote: > BTW. This is 'make allnoconfig && make' result: > > MODPOST vmlinux > ln: accessing `arch/powerpc/boot/zImage': No such file or directory > make[1]: *** [arch/powerpc/boot/zImage] Error 1 > make: *** [zImage] Error 2 If you check your .config I think you'll find you have none of the powerpc platforms selected, which means you don't get a zImage. And your kernel won't boot on any actual hardware either :) Perhaps one of the platforms should be the default if nothing else is selected, just so allnoconfig works. cheers -- Michael Ellerman OzLabs, IBM Australia Development Lab wwweb: http://michael.ellerman.id.au phone: +61 2 6212 1183 (tie line 70 21183) We do not inherit the earth from our ancestors, we borrow it from our children. - S.M.A.R.T Person [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-04 2:29 ` 2.6.22-rc3-mm1 Michael Ellerman @ 2007-06-04 8:35 ` Segher Boessenkool 0 siblings, 0 replies; 9+ messages in thread From: Segher Boessenkool @ 2007-06-04 8:35 UTC (permalink / raw) To: michael; +Cc: linuxppc-dev, Mariusz Kozlowski, Andrew Morton >> BTW. This is 'make allnoconfig && make' result: >> >> MODPOST vmlinux >> ln: accessing `arch/powerpc/boot/zImage': No such file or directory >> make[1]: *** [arch/powerpc/boot/zImage] Error 1 >> make: *** [zImage] Error 2 > > If you check your .config I think you'll find you have none of the > powerpc platforms selected, which means you don't get a zImage. Which is simply a Makefile bug. > And your > kernel won't boot on any actual hardware either :) I've never seen any allnoconfig kernel do that ;-) > Perhaps one of the platforms should be the default if nothing else is > selected, just so allnoconfig works. Nah, just don't create the zImage link if $(image-y) is empty. Segher ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-01 21:02 ` 2.6.22-rc3-mm1 Andrew Morton 2007-06-01 21:21 ` 2.6.22-rc3-mm1 Mariusz Kozlowski @ 2007-06-01 23:30 ` Benjamin Herrenschmidt 2007-06-02 8:40 ` 2.6.22-rc3-mm1 Segher Boessenkool 2 siblings, 0 replies; 9+ messages in thread From: Benjamin Herrenschmidt @ 2007-06-01 23:30 UTC (permalink / raw) To: Andrew Morton Cc: Nick Piggin, linux-kernel, linuxppc-dev, Mariusz Kozlowski, paulus, Arnd Bergmann On Fri, 2007-06-01 at 14:02 -0700, Andrew Morton wrote: > > > Yeah, allmodconfig tends to fall over in a heap on a lot of the > less-lavishly-maintained architectures. If any of these are specific > to > -mm then I guess we should fix them up, prevent the kernel from > actually > going backwards. Some of the later seems to be related to the lack of CONFIG_PM .. it's not much a lavish maintainership issue than the fact that nobody every builds the powermac drivers without CONFIG_PM :-) I'll look into fixing some of these. As for the ps3 bits, it's a known problem, the ps3 support is still very much a work in progress. Cheers, Ben. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.22-rc3-mm1 2007-06-01 21:02 ` 2.6.22-rc3-mm1 Andrew Morton 2007-06-01 21:21 ` 2.6.22-rc3-mm1 Mariusz Kozlowski 2007-06-01 23:30 ` 2.6.22-rc3-mm1 Benjamin Herrenschmidt @ 2007-06-02 8:40 ` Segher Boessenkool 2 siblings, 0 replies; 9+ messages in thread From: Segher Boessenkool @ 2007-06-02 8:40 UTC (permalink / raw) To: Andrew Morton Cc: Nick Piggin, linux-kernel, linuxppc-dev, Mariusz Kozlowski, paulus, Arnd Bergmann > Yeah, allmodconfig tends to fall over in a heap on a lot of the > less-lavishly-maintained architectures. To be fair, almost all of the powerpc allmodconfig build problems are caused by x86-only drivers (and most of those I doubt still work on x86, even). Segher ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2007-06-04 8:35 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20070530235823.793f00d9.akpm@linux-foundation.org>
2007-05-31 20:43 ` 2.6.22-rc3-mm1 Mariusz Kozlowski
2007-05-31 21:19 ` 2.6.22-rc3-mm1 Andrew Morton
2007-06-01 20:50 ` 2.6.22-rc3-mm1 Mariusz Kozlowski
2007-06-01 21:02 ` 2.6.22-rc3-mm1 Andrew Morton
2007-06-01 21:21 ` 2.6.22-rc3-mm1 Mariusz Kozlowski
2007-06-04 2:29 ` 2.6.22-rc3-mm1 Michael Ellerman
2007-06-04 8:35 ` 2.6.22-rc3-mm1 Segher Boessenkool
2007-06-01 23:30 ` 2.6.22-rc3-mm1 Benjamin Herrenschmidt
2007-06-02 8:40 ` 2.6.22-rc3-mm1 Segher Boessenkool
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).