Re: write u-boot.bin on mpc8349e-mITX-gp with bdi2000

["Muruga Ganapathy" <gmuruga@gdatech.com>]

You may want to talk to Abarton to see whether they have the BDI2000 
configuration file with 8349 support and use it for flashing the 
u-boot.



> Hello. 
> 
> Now I'm trying to write u-boot.bin on mpc8349e-mITX-gp with bdi2000. 
> But I don't have correct bdi2000 configuration file for mpc8349e-mITX-
gp. 
> 
> How can I write u-boot.bin on that board? 
> Unfortunately I erased u-boot area on that board so there no u-boot 
anymore
> on that board. 
> Is there anyone can show bdi2000 configuration file for mpc8349e-mITX-
gp? 
> Or please let me know how to write u-boot on that board with bdi2000. 
> 
> I'll appreciate any comments.
> 
> 
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 
> 

*************************************************************
GDA Technologies, Inc.		
1010 Rincon Circle 
San Jose CA, 95131
Phone	(408) 432-3090
Fax	(408) 432-3091

Accelerate Your Innovation	
**************************************************************


=====
This message contains information from GDA Technologies Inc and 
affiliates, and is intended for the sole use of the individual and 
entity to whom it is addressed. It may contain information, including 
any attachments, that is privileged, confidential and exempt from 
disclosure under applicable law. If you are not the intended addressee, 
nor authorized to receive for the intended addressee, you are hereby 
notified that you may not use, copy, disclose or distribute to anyone 
the message or any information contained in the message. If you have 
received this electronic transmission in error, please notify the 
sender immediately by a "reply to sender only" message and destroy all 
electronic and hard copies of the communication, including attachments.
====