From: Domen Puncer <domen.puncer@telargo.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: i2c@lm-sensors.org, linuxppc-embedded@ozlabs.org
Subject: Re: [PATCH] i2c-mpc: work around missing-9th-clock-pulse bug
Date: Wed, 11 Jul 2007 07:49:23 +0200 [thread overview]
Message-ID: <20070711054923.GA4375@moe.telargo.com> (raw)
In-Reply-To: <20070710144030.3786cbf3@hyperion.delvare>
On 10/07/07 14:40 +0200, Jean Delvare wrote:
> Hi Grant, hi Domen,
>
> On Tue, 10 Jul 2007 00:22:05 -0600, Grant Likely wrote:
> > On 7/10/07, Domen Puncer <domen.puncer@telargo.com> wrote:
> > > Work around a problem reported on:
> > > http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html
> > > Without this patch I2C on mpc5200 becomes unusable after a while.
> > > Tested on mpc5200 boards by Matthias and me.
> > >
> > >
> > > Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
> >
> > Looks good to me,
> >
> > Acked-by: Grant Likely <grant.likely@secretlab.ca>
>
> OK, I will take this patch, but I'd like you to add a comment before
> mpc_i2c_fixup() explaining what exactly the problem is and how it is
> worked around. Otherwise it's a bit obscure what is going on.
OK.
>
> I guess you want this patch in 2.6.23-rc1?
Yes.
So... v3:
<----------- cut ------------->
Work around a problem reported on:
http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html
Without this patch I2C on mpc5200 becomes unusable after a while.
Tested on mpc5200 boards by Matthias Fechner and me.
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
---
drivers/i2c/busses/i2c-mpc.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
Index: work-powerpc.git/drivers/i2c/busses/i2c-mpc.c
===================================================================
--- work-powerpc.git.orig/drivers/i2c/busses/i2c-mpc.c
+++ work-powerpc.git/drivers/i2c/busses/i2c-mpc.c
@@ -74,6 +74,24 @@ static irqreturn_t mpc_i2c_isr(int irq,
return IRQ_HANDLED;
}
+/* Sometimes 9th clock pulse isn't generated, so slave doesn't release
+ * the bus. Documented and suggested workaround on
+ * http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+ writeccr(i2c, 0);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+}
+
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
{
unsigned long orig_jiffies = jiffies;
@@ -153,6 +171,7 @@ static void mpc_i2c_start(struct mpc_i2c
static void mpc_i2c_stop(struct mpc_i2c *i2c)
{
writeccr(i2c, CCR_MEN);
+ writeccr(i2c, 0);
}
static int mpc_write(struct mpc_i2c *i2c, int target,
@@ -245,6 +264,8 @@ static int mpc_xfer(struct i2c_adapter *
}
if (time_after(jiffies, orig_jiffies + HZ)) {
pr_debug("I2C: timeout\n");
+ if (readb(i2c->base + MPC_I2C_SR) == (CSR_MCF | CSR_MBB | CSR_RXAK))
+ mpc_i2c_fixup(i2c);
return -EIO;
}
schedule();
next prev parent reply other threads:[~2007-07-11 5:49 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-09 7:19 [PATCH] i2c-mpc: work around missing-9th-clock-pulse bug Domen Puncer
2007-07-09 15:53 ` Grant Likely
2007-07-10 6:17 ` Domen Puncer
2007-07-10 6:22 ` Grant Likely
2007-07-10 12:40 ` Jean Delvare
2007-07-11 5:49 ` Domen Puncer [this message]
2007-07-11 6:03 ` Grant Likely
2007-07-11 6:33 ` Domen Puncer
2007-07-11 11:40 ` Jean Delvare
2007-07-21 0:03 ` [i2c] " Guennadi Liakhovetski
2007-07-24 5:14 ` [PATCH] i2c-mpc: don't disable I2C module on stop condition Domen Puncer
2007-08-08 17:19 ` Jean Delvare
2007-08-08 18:33 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070711054923.GA4375@moe.telargo.com \
--to=domen.puncer@telargo.com \
--cc=i2c@lm-sensors.org \
--cc=khali@linux-fr.org \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).