ask some questions about u-boot's bootm command

ask some questions about u-boot's bootm command

[poorbeyond]

[-- Attachment #1: Type: text/plain, Size: 1467 bytes --]

my cpu is 860T, using bootm command boot a linux kernel image, the following message print by smc1:

bootm 300000

## Booting image at 00300000 ...
   Image Name:   Linux-2.6.20.14
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1081591 Bytes =  1 MB
   Load Address: 00100000
   Entry Point:  00100000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Current stack ends at 0x01D5DB10 => set upper limit to 0x00800000
No initrd
## Transferring control to Linux (at address 00100000) ...



then, the program has no response.

i debug it througth BDM, in u-boot function "do_bootm_linux", execute at "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep", the program branch to address "0x00000000", the code is shown as following:
00000000    mr    r31,r3
00000004    mr    r30,r4
00000008    mr    r29,r5
0000000C    mr    r28,r6
00000010    mr    r27,r7
00000014    bl    0x000020C8
00000018    mfmsr    r0
0000001C    ori    r0,r0,0x30
00000020    mtspr    SRR1,r0
00000024    lis    r0,0xC0002004@h
00000028    ori    r0,r0,0xC0002004@l
0000002C    mtspr    SRR0,r0
00000030    rfi


my questions are:

1. Is the code "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep" branch right?

2. What's the expected code after "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep"?

3. When the kernel run to the "boot/simple/head.s"?


thanks a lot





poorbeyond
2007-07-22

[-- Attachment #2: Type: text/html, Size: 3790 bytes --]

Re: ask some questions about u-boot's bootm command

[Nethra]

can u send me output of printenv in boot loader..?

Nethra

poorbeyond wrote:
> 
> my cpu is 860T, using bootm command boot a linux kernel image, the
> following message print by smc1:
> 
> bootm 300000
> 
> ## Booting image at 00300000 ...
>    Image Name:   Linux-2.6.20.14
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    1081591 Bytes =  1 MB
>    Load Address: 00100000
>    Entry Point:  00100000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
> ## Current stack ends at 0x01D5DB10 => set upper limit to 0x00800000
> No initrd
> ## Transferring control to Linux (at address 00100000) ...
> 
> 
> 
> then, the program has no response.
> 
> i debug it througth BDM, in u-boot function "do_bootm_linux", execute at
> "kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))hdr->ih_ep", the
> program branch to address "0x00000000", the code is shown as following:
> 00000000    mr    r31,r3
> 00000004    mr    r30,r4
> 00000008    mr    r29,r5
> 0000000C    mr    r28,r6
> 00000010    mr    r27,r7
> 00000014    bl    0x000020C8
> 00000018    mfmsr    r0
> 0000001C    ori    r0,r0,0x30
> 00000020    mtspr    SRR1,r0
> 00000024    lis    r0,0xC0002004@h
> 00000028    ori    r0,r0,0xC0002004@l
> 0000002C    mtspr    SRR0,r0
> 00000030    rfi
> 
> 
> my questions are:
> 
> 1. Is the code "kernel = (void (*)(bd_t *, ulong, ulong, ulong,
> ulong))hdr->ih_ep" branch right?
> 
> 2. What's the expected code after "kernel = (void (*)(bd_t *, ulong,
> ulong, ulong, ulong))hdr->ih_ep"?
> 
> 3. When the kernel run to the "boot/simple/head.s"?
> 
> 
> thanks a lot
> 
> 
> 
> 
> 
> poorbeyond
> 2007-07-22
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 

-- 
View this message in context: http://www.nabble.com/ask-some-questions-about-u-boot%27s-bootm-command-tf4124319.html#a11761280
Sent from the linuxppc-embedded mailing list archive at Nabble.com.