From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 1/3] powerpc: Add function to check if address is an IO port
Date: Thu, 26 Jul 2007 14:07:13 +1000 [thread overview]
Message-ID: <20070726040753.E3B94DDEBB@ozlabs.org> (raw)
This adds a function that tells you if a given kernel virtual address
is hitting a PCI or ISA IO port permanent mapping or not. This is to
be used in the next patch to fix iomap APIs to properly unmap things.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/kernel/pci-common.c | 23 +++++++++++++++++++++++
include/asm-powerpc/pci-bridge.h | 20 ++++++++++++++++++++
2 files changed, 43 insertions(+)
Index: linux-work/arch/powerpc/kernel/pci-common.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/pci-common.c 2007-07-26 13:21:41.000000000 +1000
+++ linux-work/arch/powerpc/kernel/pci-common.c 2007-07-26 13:38:48.000000000 +1000
@@ -101,6 +101,29 @@ void pcibios_free_controller(struct pci_
kfree(phb);
}
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ int ret = 0;
+ struct pci_controller *hose;
+ unsigned long size;
+
+ spin_lock(&hose_spinlock);
+ list_for_each_entry(hose, &hose_list, list_node) {
+#ifdef CONFIG_PPC64
+ size = hose->pci_io_size;
+#else
+ size = hose->io_resource.end - hose->io_resource.start + 1;
+#endif
+ if (address >= hose->io_base_virt &&
+ address < (hose->io_base_virt + size)) {
+ ret = 1;
+ break;
+ }
+ }
+ spin_unlock(&hose_spinlock);
+ return ret;
+}
+
/*
* Return the domain number for this bus.
*/
Index: linux-work/include/asm-powerpc/pci-bridge.h
===================================================================
--- linux-work.orig/include/asm-powerpc/pci-bridge.h 2007-07-26 13:21:41.000000000 +1000
+++ linux-work/include/asm-powerpc/pci-bridge.h 2007-07-26 14:01:01.000000000 +1000
@@ -64,6 +64,14 @@ static inline struct pci_controller *pci
return bus->sysdata;
}
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+ /* No specific ISA handling on ppc32 at this stage, it
+ * all goes through PCI
+ */
+ return 0;
+}
+
/* These are used for config access before all the PCI probing
has been done. */
int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
@@ -231,6 +239,13 @@ extern void pcibios_free_controller(stru
extern void isa_bridge_find_early(struct pci_controller *hose);
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+ /* Check if address hits the reserved legacy IO range */
+ unsigned long ea = (unsigned long)address;
+ return ea >= ISA_IO_BASE && ea < ISA_IO_END;
+}
+
extern int pcibios_unmap_io_space(struct pci_bus *bus);
extern int pcibios_map_io_space(struct pci_bus *bus);
@@ -261,11 +276,16 @@ extern struct pci_controller *
pcibios_alloc_controller(struct device_node *dev);
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
#else
static inline unsigned long pci_address_to_pio(phys_addr_t address)
{
return (unsigned long)-1;
}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
#endif
reply other threads:[~2007-07-26 4:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070726040753.E3B94DDEBB@ozlabs.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox