From: Vitaly Bordug <vitb@kernel.crashing.org>
To: jyoung5@us.ibm.com
Cc: linuxppc-dev@ozlabs.org, vbarshark@ru.mvista.com
Subject: Re: Sequoia 440EPx patches not working
Date: Thu, 9 Aug 2007 16:56:12 +0400 [thread overview]
Message-ID: <20070809165612.12100334@localhost.localdomain> (raw)
In-Reply-To: <1186598710.5459.7.camel@laptop>
On Wed, 08 Aug 2007 13:45:10 -0500
Jerone Young wrote:
> Using the Sequoia (AMCC 440EPx) patches recently submitted to the
> list I am unable to boot to fully boot a uImage built with these
> patches under Uboot. It appears to hang in very early boot.
>
>
> Here is the output:
> => tftp 400000
> sequoia/uImage ENET Speed is 100 Mbps - FULL duplex connection
> (EMAC0) Using ppc_4xx_eth0
> device TFTP from server 9.53.41.24; our IP address is
> 9.53.41.38 Filename
> 'sequoia/uImage'. Load address:
> 0x400000 Loading:
> #################################################################
> #################################################################
> #################################################################
> #######################
> done Bytes transferred = 1112434 (10f972
> hex) => bootm
> 400000 ## Booting image at
> 00400000 ... Image Name:
> Linux-2.6.23-rc2 Image Type: PowerPC Linux Kernel Image (gzip
> compressed) Data Size: 1112370 Bytes = 1.1
> MB Load Address:
> 00000000 Entry Point:
> 00000000 Verifying Checksum ...
> OK Uncompressing Kernel Image ... OK
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
This seems to be a wrong image..
Are you using "make zImage" ?
The proper uImage after that command would be smth like cuImage* then...
--
Sincerely, Vitaly
next prev parent reply other threads:[~2007-08-09 12:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-08 18:45 Sequoia 440EPx patches not working Jerone Young
2007-08-09 3:08 ` David Gibson
2007-08-09 10:58 ` Valentine Barshak
2007-08-09 13:34 ` Josh Boyer
2007-08-09 16:21 ` Valentine Barshak
2007-08-09 12:56 ` Vitaly Bordug [this message]
2007-08-09 13:42 ` Jerone Young
2007-08-09 14:37 ` Jerone Young
2007-08-09 16:33 ` Valentine Barshak
2007-08-13 21:04 ` Jerone Young
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070809165612.12100334@localhost.localdomain \
--to=vitb@kernel.crashing.org \
--cc=jyoung5@us.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=vbarshark@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).