From: Olof Johansson <olof@lixom.net>
To: akpm@linux-foundation.org
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH] serial: Add pci ids for PA Semi PWRficient onchip uarts
Date: Thu, 16 Aug 2007 23:09:02 -0500 [thread overview]
Message-ID: <20070817040902.GB8294@lixom.net> (raw)
Add PCI IDs for the onchip UARTs on PA Semi PWRficient.
Signed-off-by: Olof Johansson <olof@lixom.net>
Index: linux-2.6/drivers/serial/8250_pci.c
===================================================================
--- linux-2.6.orig/drivers/serial/8250_pci.c
+++ linux-2.6/drivers/serial/8250_pci.c
@@ -984,6 +984,7 @@ enum pci_board_num_t {
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_pasemi_1682M,
};
/*
@@ -1511,6 +1512,14 @@ static struct pciserial_board pci_boards
.base_baud = 921600,
.uart_offset = 0x200,
},
+ /*
+ * PA Semi PWRficient PA6T-1682M on-chip UART
+ */
+ [pbn_pasemi_1682M] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 8333333,
+ },
};
/*
@@ -2402,6 +2411,13 @@ static struct pci_device_id serial_pci_t
PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
0, 0, pbn_b2_8_921600 },
/*
+ * PA Semi PA6T-1682M on-chip UART
+ */
+ { PCI_VENDOR_ID_PASEMI, 0xa004,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_pasemi_1682M },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
reply other threads:[~2007-08-17 5:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070817040902.GB8294@lixom.net \
--to=olof@lixom.net \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox