From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.10]) by ozlabs.org (Postfix) with ESMTP id 7D066DDE9B for ; Tue, 28 Aug 2007 04:58:56 +1000 (EST) To: Oliver Rutsch From: Wolfgang Denk Subject: Re: STK5200 pci_enable_device problem Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 27 Aug 2007 08:25:03 +0200." <46D26E3F.8040309@sympatec.com> Date: Mon, 27 Aug 2007 20:58:53 +0200 Sender: wd@denx.de Message-Id: <20070827185853.76E3A24047@gemini.denx.de> Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , In message <46D26E3F.8040309@sympatec.com> you wrote: > > >> It's not so easy to compile the PLX drivers on the 4.1 ELDK because of > >> missing headers in the ppc architecture. I managed to build the drivers > >> for the 2.6.19 kernel and I was able to work with the card except the > >> DMA routines (still working on this issue). > > > > WHy don't you use the arch/powerpc configuration, then? Note that the > > STK5200 has never been supported in a 2.6 kernel with a arch/ppc > > configuration. > > > > Because I found at least a lite5200 configuration in the 4.1 ELDK > (2.6.19.2 kernel) in the ARCH/ppc architecure. With ARCH/powerpc I only You will find many completely unsupported board configurations in the kernel.org tree, too. The fact that somethign is present does not mean anything. > Is there support for the TQM5200 and the STK5200 with ARCH/powerpc in > newer kernels? I'm still using the 3.1.1 ELDK for the TQM5200 as it have > everything I need and I don't need to use the PLX card in this board > (although it would have been nice if I got it working...). The TQM5200 / STK5200 are supported in our linux-2.6-denx tree with an arch/powerpc configuration; also lite5200b. Note that - like all MPC5200 support in the 2.6 kernel - this is all work in progress. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de It is dangerous to be right on a subject on which the established authorities are wrong. -- Voltaire