From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
To: linuxppc-dev@ozlabs.org
Cc: david@gibson.dropbear.id.au
Subject: [patch 4/4] 4xx: Convert Seqouia flash mappings to new binding
Date: Fri, 14 Sep 2007 13:54:14 -0500 [thread overview]
Message-ID: <20070914185649.551007000@linux.vnet.ibm.com> (raw)
In-Reply-To: <20070914185410.387074000@linux.vnet.ibm.com>>
A new binding for flash devices was recently introduced. This updates the
Sequoia DTS to use the new binding and enabled MTD in the defconfig.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
arch/powerpc/boot/dts/sequoia.dts | 38 +++++++++----
arch/powerpc/configs/sequoia_defconfig | 91 +++++++++++++++++++++++++++++++--
2 files changed, 115 insertions(+), 14 deletions(-)
--- linux-2.6.orig/arch/powerpc/boot/dts/sequoia.dts
+++ linux-2.6/arch/powerpc/boot/dts/sequoia.dts
@@ -142,19 +142,35 @@
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
- device_type = "rom";
- compatible = "direct-mapped";
- probe-type = "CFI";
+ compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
- partitions = < 0 180000
- 180000 200000
- 380000 3aa0000
- 3e20000 140000
- 3f60000 40000
- 3fa0000 60000>;
- partition-names = "Kernel", "ramdisk", "file system",
- "kozio", "env", "u-boot";
reg = <0 000000 4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "Kernel";
+ reg = <0 180000>;
+ };
+ partition@180000 {
+ label = "ramdisk";
+ reg = <180000 200000>;
+ };
+ partition@380000 {
+ label = "file system";
+ reg = <380000 3aa0000>;
+ };
+ partition@3e20000 {
+ label = "kozio";
+ reg = <3e20000 140000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <3f60000 40000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <3fa0000 60000>;
+ };
};
};
--- linux-2.6.orig/arch/powerpc/configs/sequoia_defconfig
+++ linux-2.6/arch/powerpc/configs/sequoia_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc3
-# Mon Aug 27 20:19:13 2007
+# Linux kernel version: 2.6.23-rc6
+# Fri Sep 14 13:20:06 2007
#
# CONFIG_PPC64 is not set
@@ -146,6 +146,7 @@ CONFIG_440A=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
@@ -317,7 +318,81 @@ CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -613,6 +688,15 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
@@ -671,6 +755,7 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
--
next prev parent reply other threads:[~2007-09-14 19:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-14 18:54 [patch 0/4] Small 4xx updates for 2.6.24 Josh Boyer
2007-09-14 18:54 ` [patch 1/4] cuimage for Bamboo board Josh Boyer
2007-09-15 2:19 ` David Gibson
2007-09-15 14:26 ` Josh Boyer
2007-09-14 18:54 ` [patch 2/4] Make partitions optional in physmap_of Josh Boyer
2007-09-15 2:21 ` David Gibson
2007-09-14 18:54 ` [patch 3/4] 4xx: Convert Walnut flash mappings to new binding Josh Boyer
2007-09-15 2:22 ` David Gibson
2007-09-15 14:25 ` Josh Boyer
2007-09-15 3:23 ` Stefan Roese
2007-09-15 14:26 ` Josh Boyer
2007-09-15 15:09 ` Wolfgang Denk
2007-09-15 17:35 ` Josh Boyer
2007-09-15 19:20 ` Segher Boessenkool
2007-09-17 2:03 ` David Gibson
2007-09-17 2:02 ` David Gibson
2007-09-14 18:54 ` Josh Boyer [this message]
2007-09-15 2:23 ` [patch 4/4] 4xx: Convert Seqouia " David Gibson
2007-09-15 3:32 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070914185649.551007000@linux.vnet.ibm.com \
--to=jwboyer@linux.vnet.ibm.com \
--cc=david@gibson.dropbear.id.au \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).