[PATCH 00/28] 8xx/82xx patches

[PATCH 00/28] 8xx/82xx patches

[Scott Wood]

This is the latest set of 8xx/82xx patches; please apply for 2.6.24.

Kumar, sorry if you got this twice, but my mailer was misconfigured last
time, and thus it didn't get to the list.

-Scott

[PATCH 01/28] CPM: Change from fsl,brg-frequency to brg/clock-frequency

[Scott Wood]

As suggested by David Gibson, now that we have a separate node
for the baud rate generators, it's better to use the standard
clock-frequency property than a cpm-node-level fsl,brg-frequency
property.

This patch updates existing places where fsl,brg-frequency is
used.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/cuboot-8xx.c |    8 +++++---
 arch/powerpc/boot/cuboot-pq2.c |    8 +++++---
 arch/powerpc/sysdev/fsl_soc.c  |   24 ++++++++++++++----------
 3 files changed, 24 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c
index 88ed840..0e82015 100644
--- a/arch/powerpc/boot/cuboot-8xx.c
+++ b/arch/powerpc/boot/cuboot-8xx.c
@@ -29,10 +29,12 @@ static void platform_fixups(void)
 	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
 
 	node = finddevice("/soc/cpm");
-	if (node) {
+	if (node)
 		setprop(node, "clock-frequency", &bd.bi_busfreq, 4);
-		setprop(node, "fsl,brg-frequency", &bd.bi_busfreq, 4);
-	}
+
+	node = finddevice("/soc/cpm/brg");
+	if (node)
+		setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
 }
 
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index 8021fd4..b150bd4 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -264,10 +264,12 @@ static void pq2_platform_fixups(void)
 	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
 
 	node = finddevice("/soc/cpm");
-	if (node) {
+	if (node)
 		setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4);
-		setprop(node, "fsl,brg-frequency", &bd.bi_brgfreq, 4);
-	}
+
+	node = finddevice("/soc/cpm/brg");
+	if (node)
+		setprop(node, "clock-frequency",  &bd.bi_brgfreq, 4);
 
 	update_cs_ranges();
 	fixup_pci();
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index d028e8d..3052366 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -73,22 +73,26 @@ static u32 brgfreq = -1;
 u32 get_brgfreq(void)
 {
 	struct device_node *node;
+	const unsigned int *prop;
+	int size;
 
 	if (brgfreq != -1)
 		return brgfreq;
 
-	node = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
-	if (!node)
-		node = of_find_compatible_node(NULL, NULL, "fsl,cpm2");
-	if (!node)
-		node = of_find_node_by_type(NULL, "cpm");
+	node = of_find_compatible_node(NULL, NULL, "fsl,cpm-brg");
 	if (node) {
-		int size;
-		const unsigned int *prop;
+		prop = of_get_property(node, "clock-frequency", &size);
+		if (prop && size == 4)
+			brgfreq = *prop;
 
-		prop = of_get_property(node, "fsl,brg-frequency", &size);
-		if (!prop)
-			prop = of_get_property(node, "brg-frequency", &size);
+		of_node_put(node);
+		return brgfreq;
+	}
+
+	/* Legacy device binding -- will go away when no users are left. */
+	node = of_find_node_by_type(NULL, "cpm");
+	if (node) {
+		prop = of_get_property(node, "brg-frequency", &size);
 		if (prop && size == 4)
 			brgfreq = *prop;
 
-- 
1.5.3.1

Re: [PATCH 01/28] CPM: Change from fsl, brg-frequency to brg/clock-frequency

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:28AM -0500, Scott Wood wrote:
> As suggested by David Gibson, now that we have a separate node
> for the baud rate generators, it's better to use the standard
> clock-frequency property than a cpm-node-level fsl,brg-frequency
> property.
> 
> This patch updates existing places where fsl,brg-frequency is
> used.
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

[snip]
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index d028e8d..3052366 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -73,22 +73,26 @@ static u32 brgfreq = -1;
>  u32 get_brgfreq(void)
>  {
>  	struct device_node *node;
> +	const unsigned int *prop;
> +	int size;
>  
>  	if (brgfreq != -1)
>  		return brgfreq;
>  
> -	node = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
> -	if (!node)
> -		node = of_find_compatible_node(NULL, NULL, "fsl,cpm2");
> -	if (!node)
> -		node = of_find_node_by_type(NULL, "cpm");
> +	node = of_find_compatible_node(NULL, NULL, "fsl,cpm-brg");
>  	if (node) {
> -		int size;
> -		const unsigned int *prop;
> +		prop = of_get_property(node, "clock-frequency", &size);
> +		if (prop && size == 4)
> +			brgfreq = *prop;
>  
> -		prop = of_get_property(node, "fsl,brg-frequency", &size);
> -		if (!prop)
> -			prop = of_get_property(node, "brg-frequency", &size);
> +		of_node_put(node);
> +		return brgfreq;
> +	}
> +
> +	/* Legacy device binding -- will go away when no users are left. */
> +	node = of_find_node_by_type(NULL, "cpm");
> +	if (node) {
> +		prop = of_get_property(node, "brg-frequency", &size);

Shouldn't you check for "fsl,brg-frequency" here, in case of old
device trees?

>  		if (prop && size == 4)
>  			brgfreq = *prop;
>  

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 01/28] CPM: Change from fsl, brg-frequency to brg/clock-frequency

[Scott Wood]

On Tue, Sep 18, 2007 at 04:11:41PM +1000, David Gibson wrote:
> > +	/* Legacy device binding -- will go away when no users are left. */
> > +	node = of_find_node_by_type(NULL, "cpm");
> > +	if (node) {
> > +		prop = of_get_property(node, "brg-frequency", &size);
> 
> Shouldn't you check for "fsl,brg-frequency" here, in case of old
> device trees?

What old device trees?  fsl,brg-frequency has never hit mainline; it's
only been in Kumar's tree for a week or so.

-Scott

Re: [PATCH 01/28] CPM: Change from fsl, brg-frequency to brg/clock-frequency

[David Gibson]

On Tue, Sep 18, 2007 at 09:21:50AM -0500, Scott Wood wrote:
> On Tue, Sep 18, 2007 at 04:11:41PM +1000, David Gibson wrote:
> > > +	/* Legacy device binding -- will go away when no users are left. */
> > > +	node = of_find_node_by_type(NULL, "cpm");
> > > +	if (node) {
> > > +		prop = of_get_property(node, "brg-frequency", &size);
> > 
> > Shouldn't you check for "fsl,brg-frequency" here, in case of old
> > device trees?
> 
> What old device trees?  fsl,brg-frequency has never hit mainline; it's
> only been in Kumar's tree for a week or so.

Ah, ok.  I didn't realise.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 02/28] Introduce new CPM device bindings.

[Scott Wood]

This introduces a new device binding for the CPM and other devices on
these boards.  Some of the changes include:

1. Proper namespace scoping for Freescale compatibles and properties.

2. Use compatible rather than things like device_type and model
to determine which particular variant of a device is present.

3. Give the drivers the relevant CPM command word directly, rather than
requiring it to have a lookup table based on device-id, SCC v. SMC, and
CPM version.

4. Specify the CPCR and the usable DPRAM region in the CPM's reg property.

Boards that do not require the legacy bindings should select
CONFIG_PPC_CPM_NEW_BINDING to enable the of_platform CPM devices. Once
all existing boards are converted and tested, the config option can
become default y to prevent new boards from using the old model.  Once
arch/ppc is gone, the config option can be removed altogether.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 Documentation/powerpc/booting-without-of.txt |  171 +++++++++++++++++++++++++-
 arch/powerpc/platforms/Kconfig               |   11 ++
 arch/powerpc/sysdev/fsl_soc.c                |    2 +
 3 files changed, 183 insertions(+), 1 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 20e0e6c..a599f1a 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1510,7 +1510,10 @@ platforms are moved over to use the flattened-device-tree model.
 
    i) Freescale QUICC Engine module (QE)
    This represents qe module that is installed on PowerQUICC II Pro.
-   Hopefully it will merge backward compatibility with CPM/CPM2.
+
+   NOTE:  This is an interim binding; it should be updated to fit
+   in with the CPM binding later in this document.
+
    Basically, it is a bus of devices, that could act more or less
    as a complete entity (UCC, USB etc ). All of them should be siblings on
    the "root" qe node, using the common properties from there.
@@ -1848,6 +1851,172 @@ platforms are moved over to use the flattened-device-tree model.
 		fsl,has-rstcr;
 	};
 
+   l) Freescale Communications Processor Module
+
+   NOTE: This is an interim binding, and will likely change slightly,
+   as more devices are supported.  The QE bindings especially are
+   incomplete.
+
+   i) Root CPM node
+
+   Properties:
+   - compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
+   - reg : The first resource is a 48-byte region beginning with
+           CPCR.  The second is the available general-purpose
+           DPRAM.
+
+   Example:
+	cpm@119c0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+		reg = <119c0 30 0 2000>;
+	}
+
+   ii) Properties common to mulitple CPM/QE devices
+
+   - fsl,cpm-command : This value is ORed with the opcode and command flag
+                       to specify the device on which a CPM command operates.
+
+   - fsl,cpm-brg : Indicates which baud rate generator the device
+                   is associated with.  If absent, an unused BRG
+                   should be dynamically allocated.  If zero, the
+                   device uses an external clock rather than a BRG.
+
+   - reg : Unless otherwise specified, the first resource represents the
+           scc/fcc/ucc registers, and the second represents the device's
+           parameter RAM region (if it has one).
+
+   iii) Serial
+
+   Currently defined compatibles:
+   - fsl,cpm1-smc-uart
+   - fsl,cpm2-smc-uart
+   - fsl,cpm1-scc-uart
+   - fsl,cpm2-scc-uart
+   - fsl,qe-uart
+
+   Example:
+
+	serial@11a00 {
+		device_type = "serial";
+		compatible = "fsl,mpc8272-scc-uart",
+		             "fsl,cpm2-scc-uart";
+		reg = <11a00 20 8000 100>;
+		interrupts = <28 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-brg = <1>;
+		fsl,cpm-command = <00800000>;
+	};
+
+   iii) Network
+
+   Currently defined compatibles:
+   - fsl,cpm1-scc-enet
+   - fsl,cpm2-scc-enet
+   - fsl,cpm1-fec-enet
+   - fsl,cpm2-fcc-enet (third resource is GFEMR)
+   - fsl,qe-enet
+
+   Example:
+
+	ethernet@11300 {
+		device_type = "network";
+		compatible = "fsl,mpc8272-fcc-enet",
+		             "fsl,cpm2-fcc-enet";
+		reg = <11300 20 8400 100 11390 1>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		interrupts = <20 8>;
+		interrupt-parent = <&PIC>;
+		phy-handle = <&PHY0>;
+		linux,network-index = <0>;
+		fsl,cpm-command = <12000300>;
+	};
+
+   iv) MDIO
+
+   Currently defined compatibles:
+   fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
+   fsl,cpm2-mdio-bitbang (reg is port C registers)
+
+   Properties for fsl,cpm2-mdio-bitbang:
+   fsl,mdio-pin : pin of port C controlling mdio data
+   fsl,mdc-pin : pin of port C controlling mdio clock
+
+   Example:
+
+	mdio@10d40 {
+		device_type = "mdio";
+		compatible = "fsl,mpc8272ads-mdio-bitbang",
+		             "fsl,mpc8272-mdio-bitbang",
+		             "fsl,cpm2-mdio-bitbang";
+		reg = <10d40 14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fsl,mdio-pin = <12>;
+		fsl,mdc-pin = <13>;
+	};
+
+   v) Baud Rate Generators
+
+   Currently defined compatibles:
+   fsl,cpm-brg
+   fsl,cpm1-brg
+   fsl,cpm2-brg
+
+   Properties:
+   - reg : There may be an arbitrary number of reg resources; BRG
+     numbers are assigned to these in order.
+   - clock-frequency : Specifies the base frequency driving
+     the BRG.
+
+   Example:
+
+	brg@119f0 {
+		compatible = "fsl,mpc8272-brg",
+		             "fsl,cpm2-brg",
+		             "fsl,cpm-brg";
+		reg = <119f0 10 115f0 10>;
+		clock-frequency = <d#25000000>;
+	};
+
+   vi) Interrupt Controllers
+
+   Currently defined compatibles:
+   - fsl,cpm1-pic
+     - only one interrupt cell
+   - fsl,pq1-pic
+   - fsl,cpm2-pic
+     - second interrupt cell is level/sense:
+       - 2 is falling edge
+       - 8 is active low
+
+   Example:
+
+	interrupt-controller@10c00 {
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <10c00 80>;
+		compatible = "mpc8272-pic", "fsl,cpm2-pic";
+	};
+
+   vii) USB (Universal Serial Bus Controller)
+
+   Properties:
+   - compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb"
+
+   Example:
+	usb@11bc0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,cpm2-usb";
+		reg = <11b60 18 8b00 100>;
+		interrupts = <b 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-command = <2e600000>;
+	};
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 78a7eda..7ad7b9c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -283,6 +283,17 @@ config CPM2
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
+config PPC_CPM_NEW_BINDING
+	bool
+	depends on CPM1 || CPM2
+	help
+	  Select this if your board has been converted to use the new
+	  device tree bindings for CPM, and no longer needs the
+	  ioport callbacks or the platform device glue code.
+
+	  The fs_enet and cpm_uart drivers will be built as
+	  of_platform devices.
+
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3052366..b465b30 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -665,6 +665,7 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 #ifdef CONFIG_CPM2
 
 extern void init_scc_ioports(struct fs_uart_platform_info*);
@@ -1204,6 +1205,7 @@ err:
 arch_initcall(cpm_smc_uart_of_init);
 
 #endif /* CONFIG_8xx */
+#endif /* CONFIG_PPC_CPM_NEW_BINDING */
 
 int __init fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,
-- 
1.5.3.1

Re: [PATCH 02/28] Introduce new CPM device bindings.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:30AM -0500, Scott Wood wrote:
> This introduces a new device binding for the CPM and other devices on
> these boards.  Some of the changes include:
> 
> 1. Proper namespace scoping for Freescale compatibles and properties.
> 
> 2. Use compatible rather than things like device_type and model
> to determine which particular variant of a device is present.
> 
> 3. Give the drivers the relevant CPM command word directly, rather than
> requiring it to have a lookup table based on device-id, SCC v. SMC, and
> CPM version.
> 
> 4. Specify the CPCR and the usable DPRAM region in the CPM's reg property.
> 
> Boards that do not require the legacy bindings should select
> CONFIG_PPC_CPM_NEW_BINDING to enable the of_platform CPM devices. Once
> all existing boards are converted and tested, the config option can
> become default y to prevent new boards from using the old model.  Once
> arch/ppc is gone, the config option can be removed altogether.
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

Acked-by: David Gibson <david@gibson.dropbear.id.au>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 03/28] Document local bus nodes in the device tree.

[Scott Wood]

cuboot-pq2 is updated to match the binding, and get rid of phandle linkage.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 Documentation/powerpc/booting-without-of.txt |   38 ++++++++++++++++++++++++++
 arch/powerpc/boot/cuboot-pq2.c               |   29 +++++--------------
 2 files changed, 46 insertions(+), 21 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index a599f1a..42cbfb0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2017,6 +2017,44 @@ platforms are moved over to use the flattened-device-tree model.
 		fsl,cpm-command = <2e600000>;
 	};
 
+   m) Chipselect/Local Bus
+
+   Properties:
+   - name : Should be localbus
+   - #address-cells : Should be either two or three.  The first cell is the
+                      chipselect number, and the remaining cells are the
+                      offset into the chipselect.
+   - #size-cells : Either one or two, depending on how large each chipselect
+                   can be.
+   - ranges : Each range should correspond to a single chipselect, and cover
+              the entire access window as configured.
+
+   Example:
+	localbus@f0010100 {
+		compatible = "fsl,mpc8272ads-localbus",
+		             "fsl,mpc8272-localbus",
+		             "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <f0010100 40>;
+
+		ranges = <0 0 fe000000 02000000
+		          1 0 f4500000 00008000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0 0 2000000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <1 0 20>;
+			compatible = "fsl,mpc8272ads-bcsr";
+		};
+	};
+
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index b150bd4..e5d94ff 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -43,22 +43,21 @@ struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)];
  * some don't set up the PCI PIC at all, so we assume the device tree is
  * sane and update the BRx registers appropriately.
  *
- * For any node defined as compatible with fsl,pq2-chipselect,
- * #address/#size must be 2/1 for chipselect bus, 1/1 for parent bus,
- * and ranges must be for whole chip selects.
+ * For any node defined as compatible with fsl,pq2-localbus,
+ * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus.
+ * Ranges must be for whole chip selects.
  */
 static void update_cs_ranges(void)
 {
-	u32 ctrl_ph;
-	void *ctrl_node, *bus_node, *parent_node;
+	void *bus_node, *parent_node;
 	u32 *ctrl_addr;
 	unsigned long ctrl_size;
 	u32 naddr, nsize;
 	int len;
 	int i;
 
-	bus_node = finddevice("/chipselect");
-	if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-chipselect"))
+	bus_node = finddevice("/localbus");
+	if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus"))
 		return;
 
 	dt_get_reg_format(bus_node, &naddr, &nsize);
@@ -73,19 +72,7 @@ static void update_cs_ranges(void)
 	if (naddr != 1 || nsize != 1)
 		goto err;
 
-	len = getprop(bus_node, "fsl,ctrl", &ctrl_ph, 4);
-	if (len != 4)
-		goto err;
-
-	ctrl_node = find_node_by_prop_value(NULL, "linux,phandle",
-	                                    (char *)&ctrl_ph, 4);
-	if (!ctrl_node)
-		goto err;
-
-	if (!dt_is_compatible(ctrl_node, "fsl,pq2-chipselect-ctrl"))
-		goto err;
-
-	if (!dt_xlate_reg(ctrl_node, 0, (unsigned long *)&ctrl_addr,
+	if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr,
 	                  &ctrl_size))
 		goto err;
 
@@ -122,7 +109,7 @@ static void update_cs_ranges(void)
 	return;
 
 err:
-	printf("Bad /chipselect or fsl,pq2-chipselect-ctrl node\r\n");
+	printf("Bad /localbus node\r\n");
 }
 
 /* Older u-boots don't set PCI up properly.  Update the hardware to match
-- 
1.5.3.1

Re: [PATCH 03/28] Document local bus nodes in the device tree.

[Kumar Gala]

On Sep 17, 2007, at 11:57 AM, Scott Wood wrote:

> cuboot-pq2 is updated to match the binding, and get rid of phandle  
> linkage.

A slight more descriptive commit message is desired.

- k

>
> Signed-off-by: Scott Wood <scottwood@freescale.com>
> ---
>  Documentation/powerpc/booting-without-of.txt |   38 +++++++++++++++ 
> +++++++++++
>  arch/powerpc/boot/cuboot-pq2.c               |   29 ++++ 
> +--------------
>  2 files changed, 46 insertions(+), 21 deletions(-)

[PATCH 04/28] Add early debug console for CPM serial ports.

[Scott Wood]

This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Kconfig.debug         |   21 ++++++++++++++++
 arch/powerpc/kernel/head_32.S      |   16 ++++++++++++
 arch/powerpc/kernel/udbg.c         |    2 +
 arch/powerpc/platforms/8xx/Kconfig |    1 +
 arch/powerpc/platforms/Kconfig     |    4 +++
 arch/powerpc/sysdev/Makefile       |    1 +
 arch/powerpc/sysdev/cpm_common.c   |   46 ++++++++++++++++++++++++++++++++++++
 include/asm-powerpc/udbg.h         |    1 +
 8 files changed, 92 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/sysdev/cpm_common.c

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index c38bc22..f4e5d22 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -221,6 +221,15 @@ config PPC_EARLY_DEBUG_44x
 	  Select this to enable early debugging for IBM 44x chips via the
 	  inbuilt serial port.
 
+config PPC_EARLY_DEBUG_CPM
+	bool "Early serial debugging for Freescale CPM-based serial ports"
+	depends on SERIAL_CPM
+	select PIN_TLB if PPC_8xx
+	help
+	  Select this to enable early debugging for Freescale chips
+	  using a CPM-based serial port.  This assumes that the bootwrapper
+	  has run, and set up the CPM in a particular way.
+
 endchoice
 
 config PPC_EARLY_DEBUG_44x_PHYSLOW
@@ -233,4 +242,16 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH
 	depends PPC_EARLY_DEBUG_44x
 	default "0x1"
 
+config PPC_EARLY_DEBUG_CPM_ADDR
+	hex "CPM UART early debug transmit descriptor address"
+	depends on PPC_EARLY_DEBUG_CPM
+	default "0xfa202808" if PPC_EP88XC
+	default "0xf0000808" if CPM2
+	default "0xff002808" if CPM1
+	help
+	  This specifies the address of the transmit descriptor
+	  used for early debug output.  Because it is needed before
+	  platform probing is done, all platforms selected must
+	  share the same address.
+
 endmenu
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 12febfe..6bee0a0 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -149,6 +149,9 @@ __after_mmu_off:
 #if defined(CONFIG_BOOTX_TEXT)
 	bl	setup_disp_bat
 #endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+	bl	setup_cpm_bat
+#endif
 
 /*
  * Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1245,6 +1248,19 @@ setup_disp_bat:
 	blr
 #endif /* CONFIG_BOOTX_TEXT */
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+setup_cpm_bat:
+	lis	r8, 0xf000
+	ori	r8, r8,	0x002a
+	mtspr	SPRN_DBAT1L, r8
+
+	lis	r11, 0xf000
+	ori	r11, r11, (BL_1M << 2) | 2
+	mtspr	SPRN_DBAT1U, r11
+
+	blr
+#endif
+
 #ifdef CONFIG_8260
 /* Jump into the system reset for the rom.
  * We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index 0f9b4ea..d723070 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -54,6 +54,8 @@ void __init udbg_early_init(void)
 #elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
 	/* PPC44x debug */
 	udbg_init_44x_as1();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
+	udbg_init_cpm();
 #endif
 }
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 39bb8c5..8ecd01a 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -3,6 +3,7 @@ config FADS
 
 config CPM1
 	bool
+	select CPM
 
 choice
 	prompt "8xx Machine Type"
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 7ad7b9c..06eda35 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -277,6 +277,7 @@ config QUICC_ENGINE
 config CPM2
 	bool
 	default n
+	select CPM
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -313,4 +314,7 @@ config FSL_ULI1575
 	  Freescale reference boards. The boards all use the ULI in pretty
 	  much the same way.
 
+config CPM
+	bool
+
 endmenu
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 08ce31e..cdf044f 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -34,6 +34,7 @@ endif
 
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
+obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o commproc.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
new file mode 100644
index 0000000..9daa6ac
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -0,0 +1,46 @@
+/*
+ * Common CPM code
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <asm/udbg.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <mm/mmu_decl.h>
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+static u32 __iomem *cpm_udbg_txdesc =
+	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
+
+static void udbg_putc_cpm(char c)
+{
+	u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
+
+	if (c == '\n')
+		udbg_putc('\r');
+
+	while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
+		;
+
+	out_8(txbuf, c);
+	out_be32(&cpm_udbg_txdesc[0], 0xa0000001);
+}
+
+void __init udbg_init_cpm(void)
+{
+	if (cpm_udbg_txdesc) {
+#ifdef CONFIG_CPM2
+		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
+#endif
+		udbg_putc = udbg_putc_cpm;
+	}
+}
+#endif
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
index ce9d82f..a9e0b0e 100644
--- a/include/asm-powerpc/udbg.h
+++ b/include/asm-powerpc/udbg.h
@@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_console(void);
 extern void __init udbg_init_debug_beat(void);
 extern void __init udbg_init_btext(void);
 extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_cpm(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */
-- 
1.5.3.1

Re: [PATCH 04/28] Add early debug console for CPM serial ports.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:33AM -0500, Scott Wood wrote:
> This code assumes that the ports have been previously set up, with
> buffers in DPRAM.
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

Looks sane as far as I can see.

Acked-by: David Gibson <david@gibson.dropbear.id.au>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 05/28] bootwrapper: Support all-in-one PCI nodes in cuboot-pq2.

[Scott Wood]

Consensus was reached to put PCI nodes at the root of the tree (and not
under /soc), but the phandle to a control node was rejected in favor of
simply not worrying about /pci/reg overlapping /soc/ranges.

This updates cuboot-82xx to not look for the phandle.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/cuboot-pq2.c |   25 ++++++++-----------------
 1 files changed, 8 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index e5d94ff..d78e943 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -126,11 +126,11 @@ static void fixup_pci(void)
 	u32 *pci_regs[3];
 	u8 *soc_regs;
 	int i, len;
-	void *ctrl_node, *bus_node, *parent_node, *soc_node;
-	u32 naddr, nsize, bus_ph, mem_log2;
+	void *node, *parent_node, *soc_node;
+	u32 naddr, nsize, mem_log2;
 
-	ctrl_node = finddevice("/soc/pci");
-	if (!ctrl_node || !dt_is_compatible(ctrl_node, "fsl,pq2-pci"))
+	node = finddevice("/pci");
+	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
 		return;
 
 	soc_node = finddevice("/soc");
@@ -138,27 +138,18 @@ static void fixup_pci(void)
 		goto err;
 
 	for (i = 0; i < 3; i++)
-		if (!dt_xlate_reg(ctrl_node, i,
+		if (!dt_xlate_reg(node, i,
 		                  (unsigned long *)&pci_regs[i], NULL))
 			goto err;
 
 	if (!dt_xlate_reg(soc_node, 0, (unsigned long *)&soc_regs, NULL))
 		goto err;
 
-	len = getprop(ctrl_node, "fsl,bus", &bus_ph, 4);
-	if (len != 4)
-		goto err;
-
-	bus_node = find_node_by_prop_value(NULL, "linux,phandle",
-	                                   (char *)&bus_ph, 4);
-	if (!bus_node)
-		goto err;
-
-	dt_get_reg_format(bus_node, &naddr, &nsize);
+	dt_get_reg_format(node, &naddr, &nsize);
 	if (naddr != 3 || nsize != 2)
 		goto err;
 
-	parent_node = get_parent(bus_node);
+	parent_node = get_parent(node);
 	if (!parent_node)
 		goto err;
 
@@ -166,7 +157,7 @@ static void fixup_pci(void)
 	if (naddr != 1 || nsize != 1)
 		goto err;
 
-	len = getprop(bus_node, "ranges", pci_ranges_buf,
+	len = getprop(node, "ranges", pci_ranges_buf,
 	              sizeof(pci_ranges_buf));
 
 	for (i = 0; i < len / sizeof(struct pci_range); i++) {
-- 
1.5.3.1

Re: [PATCH 05/28] bootwrapper: Support all-in-one PCI nodes in cuboot-pq2.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:34AM -0500, Scott Wood wrote:
> Consensus was reached to put PCI nodes at the root of the tree (and not
> under /soc), but the phandle to a control node was rejected in favor of
> simply not worrying about /pci/reg overlapping /soc/ranges.
> 
> This updates cuboot-82xx to not look for the phandle.

I preferred the split-node method, but as you say, this consensus has
been reached for now.

Acked-by: David Gibson <david@gibson.dropbear.id.au>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 06/28] bootwrapper: Add PlanetCore firmware support.

[Scott Wood]

This is a library that board code can use to extract information from the
PlanetCore configuration keys.  PlanetCore is used on various boards from
Embedded Planet.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/Makefile     |    2 +-
 arch/powerpc/boot/planetcore.c |  175 ++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/planetcore.h |   49 +++++++++++
 3 files changed, 225 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/boot/planetcore.c
 create mode 100644 arch/powerpc/boot/planetcore.h

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index cffef14..9ec785c 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,7 +45,7 @@ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
 		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
-		cpm-serial.c stdlib.c
+		cpm-serial.c stdlib.c planetcore.c
 src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
 		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
diff --git a/arch/powerpc/boot/planetcore.c b/arch/powerpc/boot/planetcore.c
new file mode 100644
index 0000000..82d3dbd
--- /dev/null
+++ b/arch/powerpc/boot/planetcore.c
@@ -0,0 +1,175 @@
+/*
+ * PlanetCore configuration data support functions
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "stdio.h"
+#include "stdlib.h"
+#include "ops.h"
+#include "planetcore.h"
+#include "io.h"
+
+/* PlanetCore passes information to the OS in the form of
+ * a table of key=value strings, separated by newlines.
+ *
+ * The list is terminated by an empty string (i.e. two
+ * consecutive newlines).
+ *
+ * To make it easier to parse, we first convert all the
+ * newlines into null bytes.
+ */
+
+void planetcore_prepare_table(char *table)
+{
+	do {
+		if (*table == '\n')
+			*table = 0;
+
+		table++;
+	} while (*(table - 1) || *table != '\n');
+
+	*table = 0;
+}
+
+const char *planetcore_get_key(const char *table, const char *key)
+{
+	int keylen = strlen(key);
+
+	do {
+		if (!strncmp(table, key, keylen) && table[keylen] == '=')
+			return table + keylen + 1;
+
+		table += strlen(table) + 1;
+	} while (strlen(table) != 0);
+
+	return NULL;
+}
+
+int planetcore_get_decimal(const char *table, const char *key, u64 *val)
+{
+	const char *str = planetcore_get_key(table, key);
+	if (!str)
+		return 0;
+
+	*val = strtoull(str, NULL, 10);
+	return 1;
+}
+
+int planetcore_get_hex(const char *table, const char *key, u64 *val)
+{
+	const char *str = planetcore_get_key(table, key);
+	if (!str)
+		return 0;
+
+	*val = strtoull(str, NULL, 16);
+	return 1;
+}
+
+static u64 mac_table[4] = {
+	0x000000000000,
+	0x000000800000,
+	0x000000400000,
+	0x000000c00000,
+};
+
+void planetcore_set_mac_addrs(const char *table)
+{
+	char addr[4][6];
+	u64 int_addr;
+	u32 i;
+	int j;
+	void *node;
+
+	if (!planetcore_get_hex(table, PLANETCORE_KEY_MAC_ADDR, &int_addr))
+		return;
+
+	for (i = 0; i < 4; i++) {
+		u64 this_dev_addr = int_addr | mac_table[i];
+
+		for (j = 5; j >= 0; j--) {
+			addr[i][j] = this_dev_addr & 0xff;
+			this_dev_addr >>= 8;
+		}
+
+		node = find_node_by_prop_value(NULL, "linux,network-index",
+		                               (void *)&i, 4);
+		if (node) {
+			printf("ENET%u: local-mac-address <-"
+			       " %02x:%02x:%02x:%02x:%02x:%02x\n\r", i,
+			       addr[i][0], addr[i][1], addr[i][2],
+			       addr[i][3], addr[i][4], addr[i][5]);
+
+			setprop(node, "local-mac-address", addr[i], 6);
+		}
+	}
+}
+
+static char prop_buf[MAX_PROP_LEN];
+
+void planetcore_set_stdout_path(const char *table)
+{
+	char *path;
+	const char *label;
+	void *node, *chosen;
+
+	label = planetcore_get_key(table, PLANETCORE_KEY_SERIAL_PORT);
+	if (!label)
+		return;
+
+	node = find_node_by_prop_value_str(NULL, "linux,planetcore-label",
+	                                   label);
+	if (!node)
+		return;
+
+	path = get_path(node, prop_buf, MAX_PROP_LEN);
+	if (!path)
+		return;
+
+	chosen = finddevice("/chosen");
+	if (!chosen)
+		chosen = create_node(NULL, "chosen");
+	if (!chosen)
+		return;
+
+	setprop_str(chosen, "linux,stdout-path", path);
+}
+
+void planetcore_set_serial_speed(const char *table)
+{
+	void *chosen, *stdout;
+	u64 baud;
+	u32 baud32;
+	int len;
+
+	chosen = finddevice("/chosen");
+	if (!chosen)
+		return;
+
+	len = getprop(chosen, "linux,stdout-path", prop_buf, MAX_PROP_LEN);
+	if (len <= 0)
+		return;
+
+	stdout = finddevice(prop_buf);
+	if (!stdout) {
+		printf("planetcore_set_serial_speed: "
+		       "Bad /chosen/linux,stdout-path.\r\n");
+
+		return;
+	}
+
+	if (!planetcore_get_decimal(table, PLANETCORE_KEY_SERIAL_BAUD,
+	                            &baud)) {
+		printf("planetcore_set_serial_speed: No SB tag.\r\n");
+		return;
+	}
+
+	baud32 = baud;
+	setprop(stdout, "current-speed", &baud32, 4);
+}
diff --git a/arch/powerpc/boot/planetcore.h b/arch/powerpc/boot/planetcore.h
new file mode 100644
index 0000000..0d4094f
--- /dev/null
+++ b/arch/powerpc/boot/planetcore.h
@@ -0,0 +1,49 @@
+#ifndef _PPC_BOOT_PLANETCORE_H_
+#define _PPC_BOOT_PLANETCORE_H_
+
+#include "types.h"
+
+#define PLANETCORE_KEY_BOARD_TYPE   "BO"
+#define PLANETCORE_KEY_BOARD_REV    "BR"
+#define PLANETCORE_KEY_MB_RAM       "D1"
+#define PLANETCORE_KEY_MAC_ADDR     "EA"
+#define PLANETCORE_KEY_FLASH_SPEED  "FS"
+#define PLANETCORE_KEY_IP_ADDR      "IP"
+#define PLANETCORE_KEY_KB_NVRAM     "NV"
+#define PLANETCORE_KEY_PROCESSOR    "PR"
+#define PLANETCORE_KEY_PROC_VARIANT "PV"
+#define PLANETCORE_KEY_SERIAL_BAUD  "SB"
+#define PLANETCORE_KEY_SERIAL_PORT  "SP"
+#define PLANETCORE_KEY_SWITCH       "SW"
+#define PLANETCORE_KEY_TEMP_OFFSET  "TC"
+#define PLANETCORE_KEY_TARGET_IP    "TIP"
+#define PLANETCORE_KEY_CRYSTAL_HZ   "XT"
+
+/* Prepare the table for processing, by turning all newlines
+ * into NULL bytes.
+ */
+void planetcore_prepare_table(char *table);
+
+/* Return the value associated with a given key in text,
+ * decimal, or hex format.
+ *
+ * Returns zero/NULL on failure, non-zero on success.
+ */
+const char *planetcore_get_key(const char *table, const char *key);
+int planetcore_get_decimal(const char *table, const char *key, u64 *val);
+int planetcore_get_hex(const char *table, const char *key, u64 *val);
+
+/* Updates the device tree local-mac-address properties based
+ * on the EA tag.
+ */
+void planetcore_set_mac_addrs(const char *table);
+
+/* Sets the linux,stdout-path in the /chosen node.  This requires the
+ * linux,planetcore-label property in each serial node.
+ */
+void planetcore_set_stdout_path(const char *table);
+
+/* Sets the current-speed property in the serial node. */
+void planetcore_set_serial_speed(const char *table);
+
+#endif
-- 
1.5.3.1

Re: [PATCH 06/28] bootwrapper: Add PlanetCore firmware support.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:35AM -0500, Scott Wood wrote:
> This is a library that board code can use to extract information from the
> PlanetCore configuration keys.  PlanetCore is used on various boards from
> Embedded Planet.
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

[snip]
> +void planetcore_set_mac_addrs(const char *table)
> +{
> +	char addr[4][6];
> +	u64 int_addr;
> +	u32 i;
> +	int j;
> +	void *node;
> +
> +	if (!planetcore_get_hex(table, PLANETCORE_KEY_MAC_ADDR, &int_addr))
> +		return;
> +
> +	for (i = 0; i < 4; i++) {
> +		u64 this_dev_addr = int_addr | mac_table[i];
> +
> +		for (j = 5; j >= 0; j--) {
> +			addr[i][j] = this_dev_addr & 0xff;
> +			this_dev_addr >>= 8;
> +		}
> +
> +		node = find_node_by_prop_value(NULL, "linux,network-index",
> +		                               (void *)&i, 4);
> +		if (node) {
> +			printf("ENET%u: local-mac-address <-"
> +			       " %02x:%02x:%02x:%02x:%02x:%02x\n\r", i,
> +			       addr[i][0], addr[i][1], addr[i][2],
> +			       addr[i][3], addr[i][4], addr[i][5]);
> +
> +			setprop(node, "local-mac-address", addr[i], 6);

Hrm.  When I said to extract the logic of fixup_mac_addrs(), I meant
to create a new one-address version of the function in devtree.c then
use it both here and in the fixup_mac_addrs() function.  Rather than
duplicating it inline here.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 07/28] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

[Scott Wood]

fsl_get_immr() uses /soc/ranges to determine the immr.

mpc885_get_clock() transforms a crystal frequency into a system frequency
according to the PLL register settings.

pq2_get_clocks() does the same as the above for the PowerQUICC II,
except that it produces several different clocks.

The mpc8xx/pq2 set_clocks() functions modify common properties in
the device tree based on the given clock data.

The mpc885/pq2 fixup_clocks() functions call get_clocks(), and
pass the results to set_clocks().

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/Makefile  |    2 +-
 arch/powerpc/boot/fsl-soc.c |   57 ++++++++++++++++++++++++
 arch/powerpc/boot/fsl-soc.h |    8 +++
 arch/powerpc/boot/mpc8xx.c  |   82 ++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/mpc8xx.h  |   11 +++++
 arch/powerpc/boot/pq2.c     |  102 +++++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/pq2.h     |   11 +++++
 7 files changed, 272 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/boot/fsl-soc.c
 create mode 100644 arch/powerpc/boot/fsl-soc.h
 create mode 100644 arch/powerpc/boot/mpc8xx.c
 create mode 100644 arch/powerpc/boot/mpc8xx.h
 create mode 100644 arch/powerpc/boot/pq2.c
 create mode 100644 arch/powerpc/boot/pq2.h

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9ec785c..932492a 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,7 +45,7 @@ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
 		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
-		cpm-serial.c stdlib.c planetcore.c
+		cpm-serial.c stdlib.c planetcore.c fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
 		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
diff --git a/arch/powerpc/boot/fsl-soc.c b/arch/powerpc/boot/fsl-soc.c
new file mode 100644
index 0000000..b835ed6
--- /dev/null
+++ b/arch/powerpc/boot/fsl-soc.c
@@ -0,0 +1,57 @@
+/*
+ * Freescale SOC support functions
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "fsl-soc.h"
+#include "stdio.h"
+
+static u32 prop_buf[MAX_PROP_LEN / 4];
+
+u32 *fsl_get_immr(void)
+{
+	void *soc;
+	unsigned long ret = 0;
+
+	soc = find_node_by_devtype(NULL, "soc");
+	if (soc) {
+		int size;
+		u32 naddr;
+
+		size = getprop(soc, "#address-cells", prop_buf, MAX_PROP_LEN);
+		if (size == 4)
+			naddr = prop_buf[0];
+		else
+			naddr = 2;
+
+		if (naddr != 1 && naddr != 2)
+			goto err;
+
+		size = getprop(soc, "ranges", prop_buf, MAX_PROP_LEN);
+
+		if (size < 12)
+			goto err;
+		if (prop_buf[0] != 0)
+			goto err;
+		if (naddr == 2 && prop_buf[1] != 0)
+			goto err;
+
+		if (!dt_xlate_addr(soc, prop_buf + naddr, 8, &ret))
+			ret = 0;
+	}
+
+err:
+	if (!ret)
+		printf("fsl_get_immr: Failed to find immr base\r\n");
+
+	return (u32 *)ret;
+}
diff --git a/arch/powerpc/boot/fsl-soc.h b/arch/powerpc/boot/fsl-soc.h
new file mode 100644
index 0000000..5da26fc
--- /dev/null
+++ b/arch/powerpc/boot/fsl-soc.h
@@ -0,0 +1,8 @@
+#ifndef _PPC_BOOT_FSL_SOC_H_
+#define _PPC_BOOT_FSL_SOC_H_
+
+#include "types.h"
+
+u32 *fsl_get_immr(void);
+
+#endif
diff --git a/arch/powerpc/boot/mpc8xx.c b/arch/powerpc/boot/mpc8xx.c
new file mode 100644
index 0000000..add55a7
--- /dev/null
+++ b/arch/powerpc/boot/mpc8xx.c
@@ -0,0 +1,82 @@
+/*
+ * MPC8xx support functions
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "fsl-soc.h"
+#include "mpc8xx.h"
+#include "stdio.h"
+#include "io.h"
+
+#define MPC8XX_PLPRCR (0x284/4) /* PLL and Reset Control Register */
+
+/* Return system clock from crystal frequency */
+u32 mpc885_get_clock(u32 crystal)
+{
+	u32 *immr;
+	u32 plprcr;
+	int mfi, mfn, mfd, pdf, div;
+	u32 ret;
+
+	immr = fsl_get_immr();
+	if (!immr) {
+		printf("mpc885_get_clock: Couldn't get IMMR base.\r\n");
+		return 0;
+	}
+
+	plprcr = in_be32(&immr[MPC8XX_PLPRCR]);
+
+	mfi = (plprcr >> 16) & 15;
+	if (mfi < 5) {
+		printf("Warning: PLPRCR[MFI] value of %d out-of-bounds\r\n",
+		       mfi);
+		mfi = 5;
+	}
+
+	pdf = (plprcr >> 1) & 0xf;
+	div = (plprcr >> 20) & 3;
+	mfd = (plprcr >> 22) & 0x1f;
+	mfn = (plprcr >> 27) & 0x1f;
+
+	ret = crystal * mfi;
+
+	if (mfn != 0)
+		ret += crystal * mfn / (mfd + 1);
+
+	return ret / (pdf + 1);
+}
+
+/* Set common device tree fields based on the given clock frequencies. */
+void mpc8xx_set_clocks(u32 sysclk)
+{
+	void *node;
+
+	dt_fixup_cpu_clocks(sysclk, sysclk / 16, sysclk);
+
+	node = finddevice("/soc/cpm");
+	if (node)
+		setprop(node, "clock-frequency", &sysclk, 4);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node)
+		setprop(node, "clock-frequency", &sysclk, 4);
+}
+
+int mpc885_fixup_clocks(u32 crystal)
+{
+	u32 sysclk = mpc885_get_clock(crystal);
+	if (!sysclk)
+		return 0;
+
+	mpc8xx_set_clocks(sysclk);
+	return 1;
+}
diff --git a/arch/powerpc/boot/mpc8xx.h b/arch/powerpc/boot/mpc8xx.h
new file mode 100644
index 0000000..3f59901
--- /dev/null
+++ b/arch/powerpc/boot/mpc8xx.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_BOOT_MPC8xx_H_
+#define _PPC_BOOT_MPC8xx_H_
+
+#include "types.h"
+
+void mpc8xx_set_clocks(u32 sysclk);
+
+u32 mpc885_get_clock(u32 crystal);
+int mpc885_fixup_clocks(u32 crystal);
+
+#endif
diff --git a/arch/powerpc/boot/pq2.c b/arch/powerpc/boot/pq2.c
new file mode 100644
index 0000000..f6d1185
--- /dev/null
+++ b/arch/powerpc/boot/pq2.c
@@ -0,0 +1,102 @@
+/*
+ * PowerQUICC II support functions
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "fsl-soc.h"
+#include "pq2.h"
+#include "stdio.h"
+#include "io.h"
+
+#define PQ2_SCCR (0x10c80/4) /* System Clock Configuration Register */
+#define PQ2_SCMR (0x10c88/4) /* System Clock Mode Register */
+
+static int pq2_corecnf_map[] = {
+	3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, -1,
+	6, 5, 13, 2, 14, 4, 15, 9, 0, 11, 8, 10, 16, 12, 7, -1
+};
+
+/* Get various clocks from crystal frequency.
+ * Returns zero on failure and non-zero on success.
+ */
+int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq,
+                   u32 *timebase, u32 *brgfreq)
+{
+	u32 *immr;
+	u32 sccr, scmr, mainclk, busclk;
+	int corecnf, busdf, plldf, pllmf, dfbrg;
+
+	immr = fsl_get_immr();
+	if (!immr) {
+		printf("pq2_get_clocks: Couldn't get IMMR base.\r\n");
+		return 0;
+	}
+
+	sccr = in_be32(&immr[PQ2_SCCR]);
+	scmr = in_be32(&immr[PQ2_SCMR]);
+
+	dfbrg = sccr & 3;
+	corecnf = (scmr >> 24) & 0x1f;
+	busdf = (scmr >> 20) & 0xf;
+	plldf = (scmr >> 12) & 1;
+	pllmf = scmr & 0xfff;
+
+	mainclk = crystal * (pllmf + 1) / (plldf + 1);
+	busclk = mainclk / (busdf + 1);
+
+	if (sysfreq)
+		*sysfreq = mainclk / 2;
+	if (timebase)
+		*timebase = busclk / 4;
+	if (brgfreq)
+		*brgfreq = mainclk / (1 << ((dfbrg + 1) * 2));
+
+	if (corefreq) {
+		int coremult = pq2_corecnf_map[corecnf];
+
+		if (coremult < 0)
+			*corefreq = mainclk / 2;
+		else if (coremult == 0)
+			return 0;
+		else
+			*corefreq = busclk * coremult / 2;
+	}
+
+	return 1;
+}
+
+/* Set common device tree fields based on the given clock frequencies. */
+void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq)
+{
+	void *node;
+
+	dt_fixup_cpu_clocks(corefreq, timebase, sysfreq);
+
+	node = finddevice("/soc/cpm");
+	if (node)
+		setprop(node, "clock-frequency", &sysfreq, 4);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node)
+		setprop(node, "clock-frequency", &brgfreq, 4);
+}
+
+int pq2_fixup_clocks(u32 crystal)
+{
+	u32 sysfreq, corefreq, timebase, brgfreq;
+
+	if (!pq2_get_clocks(crystal, &sysfreq, &corefreq, &timebase, &brgfreq))
+		return 0;
+
+	pq2_set_clocks(sysfreq, corefreq, timebase, brgfreq);
+	return 1;
+}
diff --git a/arch/powerpc/boot/pq2.h b/arch/powerpc/boot/pq2.h
new file mode 100644
index 0000000..481698c
--- /dev/null
+++ b/arch/powerpc/boot/pq2.h
@@ -0,0 +1,11 @@
+#ifndef _PPC_BOOT_PQ2_H_
+#define _PPC_BOOT_PQ2_H_
+
+#include "types.h"
+
+int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq,
+                   u32 *timebase, u32 *brgfreq);
+void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq);
+int pq2_fixup_clocks(u32 crystal);
+
+#endif
-- 
1.5.3.1

Re: [PATCH 07/28] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:36AM -0500, Scott Wood wrote:
> fsl_get_immr() uses /soc/ranges to determine the immr.
> 
> mpc885_get_clock() transforms a crystal frequency into a system frequency
> according to the PLL register settings.
> 
> pq2_get_clocks() does the same as the above for the PowerQUICC II,
> except that it produces several different clocks.
> 
> The mpc8xx/pq2 set_clocks() functions modify common properties in
> the device tree based on the given clock data.
> 
> The mpc885/pq2 fixup_clocks() functions call get_clocks(), and
> pass the results to set_clocks().
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

Acked-by: David Gibson <david@gibson.dropbear.id.au>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 08/28] bootwrapper: Use fsl_get_immr() in cuboot-pq2.c.

[Scott Wood]

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/cuboot-pq2.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index d78e943..61574f3 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -15,6 +15,7 @@
 #include "stdio.h"
 #include "cuboot.h"
 #include "io.h"
+#include "fsl-soc.h"
 
 #define TARGET_CPM2
 #define TARGET_HAS_ETH1
@@ -126,23 +127,20 @@ static void fixup_pci(void)
 	u32 *pci_regs[3];
 	u8 *soc_regs;
 	int i, len;
-	void *node, *parent_node, *soc_node;
+	void *node, *parent_node;
 	u32 naddr, nsize, mem_log2;
 
 	node = finddevice("/pci");
 	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
 		return;
 
-	soc_node = finddevice("/soc");
-	if (!soc_node || !dt_is_compatible(soc_node, "fsl,pq2-soc"))
-		goto err;
-
 	for (i = 0; i < 3; i++)
 		if (!dt_xlate_reg(node, i,
 		                  (unsigned long *)&pci_regs[i], NULL))
 			goto err;
 
-	if (!dt_xlate_reg(soc_node, 0, (unsigned long *)&soc_regs, NULL))
+	soc_regs = (u8 *)fsl_get_immr();
+	if (!soc_regs)
 		goto err;
 
 	dt_get_reg_format(node, &naddr, &nsize);
-- 
1.5.3.1

Re: [PATCH 08/28] bootwrapper: Use fsl_get_immr() in cuboot-pq2.c.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:37AM -0500, Scott Wood wrote:

Needs a commit comment

> Signed-off-by: Scott Wood <scottwood@freescale.com>


> ---
>  arch/powerpc/boot/cuboot-pq2.c |   10 ++++------
>  1 files changed, 4 insertions(+), 6 deletions(-)
> 

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 09/28] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.

[Scott Wood]

The existing OF glue code was crufty and broken.  Rather than fix it,
it has been removed, and the serial driver now talks to the device tree
directly.

The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms
are dropped from arch/ppc (which will hopefully be soon), and existing
arch/powerpc boards that I wasn't able to test on for this patchset get
converted (which should be even sooner).

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/serial/cpm_uart/cpm_uart.h      |    6 +-
 drivers/serial/cpm_uart/cpm_uart_core.c |  241 ++++++++++++++++++++++++++++---
 drivers/serial/cpm_uart/cpm_uart_cpm1.c |   16 ++-
 drivers/serial/cpm_uart/cpm_uart_cpm1.h |    2 +
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |   18 +++-
 drivers/serial/cpm_uart/cpm_uart_cpm2.h |    2 +
 6 files changed, 260 insertions(+), 25 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c..4e1987a 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -80,14 +80,18 @@ struct uart_cpm_port {
 	int			is_portb;
 	/* wait on close if needed */
 	int 			wait_closing;
+	/* value to combine with opcode to form cpm command */
+	u32			command;
 };
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 extern int cpm_uart_port_map[UART_NR];
+#endif
 extern int cpm_uart_nr;
 extern struct uart_cpm_port cpm_uart_ports[UART_NR];
 
 /* these are located in their respective files */
-void cpm_line_cr_cmd(int line, int cmd);
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
 int cpm_uart_init_portdesc(void);
 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cefde58..78171d0 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -10,7 +10,7 @@
  *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  *
- *  Copyright (C) 2004 Freescale Semiconductor, Inc.
+ *  Copyright (C) 2004, 2007 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *            (C) 2005-2006 MontaVista Software, Inc.
  * 		Vitaly Bordug <vbordug@ru.mvista.com>
@@ -47,6 +47,11 @@
 #include <asm/irq.h>
 #include <asm/delay.h>
 #include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#include <asm/of_platform.h>
+#endif
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -57,12 +62,6 @@
 
 #include "cpm_uart.h"
 
-/***********************************************************************/
-
-/* Track which ports are configured as uarts */
-int cpm_uart_port_map[UART_NR];
-/* How many ports did we config as uarts */
-int cpm_uart_nr = 0;
 
 /**************************************************************/
 
@@ -73,6 +72,11 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+/* Track which ports are configured as uarts */
+int cpm_uart_port_map[UART_NR];
+/* How many ports did we config as uarts */
+int cpm_uart_nr;
 
 /* Place-holder for board-specific stuff */
 struct platform_device* __attribute__ ((weak)) __init
@@ -119,6 +123,7 @@ static int cpm_uart_id2nr(int id)
 	/* not found or invalid argument */
 	return -1;
 }
+#endif
 
 /*
  * Check, if transmit buffers are processed
@@ -232,15 +237,14 @@ static void cpm_uart_enable_ms(struct uart_port *port)
 static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	int line = pinfo - cpm_uart_ports;
 
 	pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line,
 		break_state);
 
 	if (break_state)
-		cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
 	else
-		cpm_line_cr_cmd(line, CPM_CR_RESTART_TX);
+		cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
 }
 
 /*
@@ -407,7 +411,6 @@ static int cpm_uart_startup(struct uart_port *port)
 {
 	int retval;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	int line = pinfo - cpm_uart_ports;
 
 	pr_debug("CPM uart[%d]:startup\n", port->line);
 
@@ -426,7 +429,7 @@ static int cpm_uart_startup(struct uart_port *port)
 	}
 
 	if (!(pinfo->flags & FLAG_CONSOLE))
-		cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
+		cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 	return 0;
 }
 
@@ -442,7 +445,6 @@ inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
 static void cpm_uart_shutdown(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	int line = pinfo - cpm_uart_ports;
 
 	pr_debug("CPM uart[%d]:shutdown\n", port->line);
 
@@ -473,9 +475,9 @@ static void cpm_uart_shutdown(struct uart_port *port)
 
 		/* Shut them really down and reinit buffer descriptors */
 		if (IS_SMC(pinfo))
-			cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+			cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
 		else
-			cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+			cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
 
 		cpm_uart_initbd(pinfo);
 	}
@@ -595,7 +597,6 @@ static void cpm_uart_set_termios(struct uart_port *port,
 
 	cpm_set_brg(pinfo->brg - 1, baud);
 	spin_unlock_irqrestore(&port->lock, flags);
-
 }
 
 static const char *cpm_uart_type(struct uart_port *port)
@@ -742,7 +743,6 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 
 static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 {
-	int line = pinfo - cpm_uart_ports;
 	volatile scc_t *scp;
 	volatile scc_uart_t *sup;
 
@@ -783,7 +783,7 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 
 	/* Send the CPM an initialize command.
 	 */
-	cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
@@ -803,7 +803,6 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 
 static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 {
-	int line = pinfo - cpm_uart_ports;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 
@@ -840,7 +839,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	up->smc_brkec = 0;
 	up->smc_brkcr = 1;
 
-	cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
@@ -929,6 +928,85 @@ static struct uart_ops cpm_uart_pops = {
 	.verify_port	= cpm_uart_verify_port,
 };
 
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+struct uart_cpm_port cpm_uart_ports[UART_NR];
+
+int cpm_uart_init_port(struct device_node *np, struct uart_cpm_port *pinfo)
+{
+	const u32 *data;
+	void __iomem *mem, __iomem *pram;
+	int len;
+	int ret;
+
+	data = of_get_property(np, "fsl,cpm-brg", &len);
+	if (!data || len != 4) {
+		printk(KERN_ERR "CPM UART %s has no/invalid "
+		                "fsl,cpm-brg property.\n", np->name);
+		return -EINVAL;
+	}
+	pinfo->brg = *data;
+
+	data = of_get_property(np, "fsl,cpm-command", &len);
+	if (!data || len != 4) {
+		printk(KERN_ERR "CPM UART %s has no/invalid "
+		                "fsl,cpm-command property.\n", np->name);
+		return -EINVAL;
+	}
+	pinfo->command = *data;
+
+	mem = of_iomap(np, 0);
+	if (!mem)
+		return -ENOMEM;
+
+	pram = of_iomap(np, 1);
+	if (!pram) {
+		ret = -ENOMEM;
+		goto out_mem;
+	}
+
+	if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
+	    of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
+		pinfo->sccp = mem;
+		pinfo->sccup = pram;
+	} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
+	           of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
+		pinfo->flags |= FLAG_SMC;
+		pinfo->smcp = mem;
+		pinfo->smcup = pram;
+	} else {
+		ret = -ENODEV;
+		goto out_pram;
+	}
+
+	pinfo->tx_nrfifos = TX_NUM_FIFO;
+	pinfo->tx_fifosize = TX_BUF_SIZE;
+	pinfo->rx_nrfifos = RX_NUM_FIFO;
+	pinfo->rx_fifosize = RX_BUF_SIZE;
+
+	pinfo->port.uartclk = ppc_proc_freq;
+	pinfo->port.mapbase = (unsigned long)mem;
+	pinfo->port.type = PORT_CPM;
+	pinfo->port.ops = &cpm_uart_pops,
+	pinfo->port.iotype = UPIO_MEM;
+	spin_lock_init(&pinfo->port.lock);
+
+	pinfo->port.irq = of_irq_to_resource(np, 0, NULL);
+	if (pinfo->port.irq == NO_IRQ) {
+		ret = -EINVAL;
+		goto out_pram;
+	}
+
+	return cpm_uart_request_port(&pinfo->port);
+
+out_pram:
+	iounmap(pram);
+out_mem:
+	iounmap(mem);
+	return ret;
+}
+
+#else
+
 struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 	[UART_SMC1] = {
 		.port = {
@@ -1072,6 +1150,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 
 	return 0;
 }
+#endif
 
 #ifdef CONFIG_SERIAL_CPM_CONSOLE
 /*
@@ -1083,8 +1162,12 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 static void cpm_uart_console_write(struct console *co, const char *s,
 				   u_int count)
 {
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+	struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
+#else
 	struct uart_cpm_port *pinfo =
 	    &cpm_uart_ports[cpm_uart_port_map[co->index]];
+#endif
 	unsigned int i;
 	volatile cbd_t *bdp, *bdbase;
 	volatile unsigned char *cp;
@@ -1155,13 +1238,47 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 
 static int __init cpm_uart_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port;
-	struct uart_cpm_port *pinfo;
 	int baud = 38400;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 	int ret;
+	struct uart_cpm_port *pinfo;
+	struct uart_port *port;
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+	struct device_node *np = NULL;
+	int i = 0;
+
+	if (co->index >= UART_NR) {
+		printk(KERN_ERR "cpm_uart: console index %d too high\n",
+		       co->index);
+		return -ENODEV;
+	}
+
+	do {
+		np = of_find_node_by_type(np, "serial");
+		if (!np)
+			return -ENODEV;
+
+		if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") &&
+		    !of_device_is_compatible(np, "fsl,cpm1-scc-uart") &&
+		    !of_device_is_compatible(np, "fsl,cpm2-smc-uart") &&
+		    !of_device_is_compatible(np, "fsl,cpm2-scc-uart"))
+			i--;
+	} while (i++ != co->index);
+
+	pinfo = &cpm_uart_ports[co->index];
+
+	pinfo->flags |= FLAG_CONSOLE;
+	port = &pinfo->port;
+
+	ret = cpm_uart_init_port(np, pinfo);
+	of_node_put(np);
+	if (ret)
+		return ret;
+
+#else
 
 	struct fs_uart_platform_info *pdata;
 	struct platform_device* pdev = early_uart_get_pdev(co->index);
@@ -1188,6 +1305,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	}
 
 	pinfo->flags |= FLAG_CONSOLE;
+#endif
 
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1196,6 +1314,10 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 			baud = 9600;
 	}
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+	udbg_putc = NULL;
+#endif
+
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
 		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -1252,7 +1374,81 @@ static struct uart_driver cpm_reg = {
 	.major		= SERIAL_CPM_MAJOR,
 	.minor		= SERIAL_CPM_MINOR,
 	.cons		= CPM_UART_CONSOLE,
+	.nr		= UART_NR,
+};
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+static int probe_index;
+
+static int __devinit cpm_uart_probe(struct of_device *ofdev,
+                                    const struct of_device_id *match)
+{
+	int index = probe_index++;
+	struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
+	int ret;
+
+	pinfo->port.line = index;
+
+	if (index >= UART_NR)
+		return -ENODEV;
+
+	dev_set_drvdata(&ofdev->dev, pinfo);
+
+	ret = cpm_uart_init_port(ofdev->node, pinfo);
+	if (ret)
+		return ret;
+
+	return uart_add_one_port(&cpm_reg, &pinfo->port);
+}
+
+static int __devexit cpm_uart_remove(struct of_device *ofdev)
+{
+	struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
+	return uart_remove_one_port(&cpm_reg, &pinfo->port);
+}
+
+static struct of_device_id cpm_uart_match[] = {
+	{
+		.compatible = "fsl,cpm1-smc-uart",
+	},
+	{
+		.compatible = "fsl,cpm1-scc-uart",
+	},
+	{
+		.compatible = "fsl,cpm2-smc-uart",
+	},
+	{
+		.compatible = "fsl,cpm2-scc-uart",
+	},
+	{}
 };
+
+static struct of_platform_driver cpm_uart_driver = {
+	.name = "cpm_uart",
+	.match_table = cpm_uart_match,
+	.probe = cpm_uart_probe,
+	.remove = cpm_uart_remove,
+ };
+
+static int __init cpm_uart_init(void)
+{
+	int ret = uart_register_driver(&cpm_reg);
+	if (ret)
+		return ret;
+
+	ret = of_register_platform_driver(&cpm_uart_driver);
+	if (ret)
+		uart_unregister_driver(&cpm_reg);
+
+	return ret;
+}
+
+static void __exit cpm_uart_exit(void)
+{
+	of_unregister_platform_driver(&cpm_uart_driver);
+	uart_unregister_driver(&cpm_reg);
+}
+#else
 static int cpm_uart_drv_probe(struct device *dev)
 {
 	struct platform_device  *pdev = to_platform_device(dev);
@@ -1380,6 +1576,7 @@ static void __exit cpm_uart_exit(void)
 	driver_unregister(&cpm_smc_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
+#endif
 
 module_init(cpm_uart_init);
 module_exit(cpm_uart_exit);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 8c6324e..4647f55 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -49,9 +49,20 @@
 
 /**************************************************************/
 
-void cpm_line_cr_cmd(int line, int cmd)
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+{
+	u16 __iomem *cpcr = &cpmp->cp_cpcr;
+
+	out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG);
+	while (in_be16(cpcr) & CPM_CR_FLG)
+		;
+}
+#else
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	ushort val;
+	int line = port - cpm_uart_ports;
 	volatile cpm8xx_t *cp = cpmp;
 
 	switch (line) {
@@ -114,6 +125,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
 	/* XXX SCC4: insert port configuration here */
 	pinfo->brg = 4;
 }
+#endif
 
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
@@ -184,6 +196,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 	cpm_dpfree(pinfo->dp_addr);
 }
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 /* Setup any dynamic params in the uart desc */
 int cpm_uart_init_portdesc(void)
 {
@@ -279,3 +292,4 @@ int cpm_uart_init_portdesc(void)
 #endif
 	return 0;
 }
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index a99e45e..cdc9b22 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -13,12 +13,14 @@
 #include <asm/commproc.h>
 
 /* defines for IRQs */
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 #define SMC1_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SMC1)
 #define SMC2_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SMC2)
 #define SCC1_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC1)
 #define SCC2_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC2)
 #define SCC3_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC3)
 #define SCC4_IRQ	(CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#endif
 
 static inline void cpm_set_brg(int brg, int baud)
 {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 7b61d80..7ebce26 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -49,9 +49,22 @@
 
 /**************************************************************/
 
-void cpm_line_cr_cmd(int line, int cmd)
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+{
+	cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm);
+
+	out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG);
+	while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG)
+		;
+
+	cpm2_unmap(cp);
+}
+#else
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	ulong val;
+	int line = port - cpm_uart_ports;
 	volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
 
 
@@ -211,6 +224,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
 	cpm2_unmap(cpmux);
 	cpm2_unmap(io);
 }
+#endif
 
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and 
@@ -281,6 +295,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 	cpm_dpfree(pinfo->dp_addr);
 }
 
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 /* Setup any dynamic params in the uart desc */
 int cpm_uart_init_portdesc(void)
 {
@@ -386,3 +401,4 @@ int cpm_uart_init_portdesc(void)
 
 	return 0;
 }
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index 1b3219f..e7717ec 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -13,12 +13,14 @@
 #include <asm/cpm2.h>
 
 /* defines for IRQs */
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
 #define SMC1_IRQ	SIU_INT_SMC1
 #define SMC2_IRQ	SIU_INT_SMC2
 #define SCC1_IRQ	SIU_INT_SCC1
 #define SCC2_IRQ	SIU_INT_SCC2
 #define SCC3_IRQ	SIU_INT_SCC3
 #define SCC4_IRQ	SIU_INT_SCC4
+#endif
 
 static inline void cpm_set_brg(int brg, int baud)
 {
-- 
1.5.3.1

Re: [PATCH 09/28] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 361 bytes --]

On Mon, 17 Sep 2007 11:57:38 -0500 Scott Wood <scottwood@freescale.com> wrote:
>
> +++ b/drivers/serial/cpm_uart/cpm_uart_core.c
> @@ -10,7 +10,7 @@
> +
> +#ifdef CONFIG_PPC_CPM_NEW_BINDING
> +#include <asm/of_platform.h>

linux/of_platform.h

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

[PATCH 10/28] cpm_uart: sparse fixes

[Scott Wood]

Mostly a bunch of direct access to in/out conversions, plus a few
cast removals, __iomem annotations, and miscellaneous cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/serial/cpm_uart/cpm_uart.h      |   42 +++--
 drivers/serial/cpm_uart/cpm_uart_core.c |  299 ++++++++++++++++---------------
 drivers/serial/cpm_uart/cpm_uart_cpm1.c |    2 +-
 drivers/serial/cpm_uart/cpm_uart_cpm1.h |   14 +-
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |    4 +-
 drivers/serial/cpm_uart/cpm_uart_cpm2.h |   14 +-
 6 files changed, 192 insertions(+), 183 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 4e1987a..32b9737 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -56,21 +56,21 @@ struct uart_cpm_port {
 	u16			rx_fifosize;
 	u16			tx_nrfifos;
 	u16			tx_fifosize;
-	smc_t			*smcp;
-	smc_uart_t		*smcup;
-	scc_t			*sccp;
-	scc_uart_t		*sccup;
-	volatile cbd_t		*rx_bd_base;
-	volatile cbd_t		*rx_cur;
-	volatile cbd_t		*tx_bd_base;
-	volatile cbd_t		*tx_cur;
+	smc_t __iomem		*smcp;
+	smc_uart_t __iomem	*smcup;
+	scc_t __iomem		*sccp;
+	scc_uart_t __iomem	*sccup;
+	cbd_t __iomem		*rx_bd_base;
+	cbd_t __iomem		*rx_cur;
+	cbd_t __iomem		*tx_bd_base;
+	cbd_t __iomem		*tx_cur;
 	unsigned char		*tx_buf;
 	unsigned char		*rx_buf;
 	u32			flags;
 	void			(*set_lineif)(struct uart_cpm_port *);
 	u8			brg;
 	uint			 dp_addr;
-	void			*mem_addr;
+	void 			*mem_addr;
 	dma_addr_t		 dma_addr;
 	u32			mem_size;
 	/* helpers */
@@ -106,34 +106,36 @@ void scc4_lineif(struct uart_cpm_port *pinfo);
 /*
    virtual to phys transtalion
 */
-static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
+static inline unsigned long cpu2cpm_addr(void *addr,
+                                         struct uart_cpm_port *pinfo)
 {
 	int offset;
 	u32 val = (u32)addr;
+	u32 mem = (u32)pinfo->mem_addr;
 	/* sane check */
-	if (likely((val >= (u32)pinfo->mem_addr)) &&
-			(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
-		offset = val - (u32)pinfo->mem_addr;
-		return pinfo->dma_addr+offset;
+	if (likely(val >= mem && val < mem + pinfo->mem_size)) {
+		offset = val - mem;
+		return pinfo->dma_addr + offset;
 	}
 	/* something nasty happened */
 	BUG();
 	return 0;
 }
 
-static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
+static inline void *cpm2cpu_addr(unsigned long addr,
+                                 struct uart_cpm_port *pinfo)
 {
 	int offset;
 	u32 val = addr;
+	u32 dma = (u32)pinfo->dma_addr;
 	/* sane check */
-	if (likely((val >= pinfo->dma_addr) &&
-			(val<(pinfo->dma_addr + pinfo->mem_size)))) {
-		offset = val - (u32)pinfo->dma_addr;
-		return (void*)(pinfo->mem_addr+offset);
+	if (likely(val >= dma && val < dma + pinfo->mem_size)) {
+		offset = val - dma;
+		return pinfo->mem_addr + offset;
 	}
 	/* something nasty happened */
 	BUG();
-	return 0;
+	return NULL;
 }
 
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 78171d0..c43706e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -131,14 +131,14 @@ static int cpm_uart_id2nr(int id)
 static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile cbd_t *bdp = pinfo->tx_bd_base;
+	cbd_t __iomem *bdp = pinfo->tx_bd_base;
 	int ret = 0;
 
 	while (1) {
-		if (bdp->cbd_sc & BD_SC_READY)
+		if (in_be16(&bdp->cbd_sc) & BD_SC_READY)
 			break;
 
-		if (bdp->cbd_sc & BD_SC_WRAP) {
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) {
 			ret = TIOCSER_TEMT;
 			break;
 		}
@@ -167,15 +167,15 @@ static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 static void cpm_uart_stop_tx(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile smc_t *smcp = pinfo->smcp;
-	volatile scc_t *sccp = pinfo->sccp;
+	smc_t __iomem *smcp = pinfo->smcp;
+	scc_t __iomem *sccp = pinfo->sccp;
 
 	pr_debug("CPM uart[%d]:stop tx\n", port->line);
 
 	if (IS_SMC(pinfo))
-		smcp->smc_smcm &= ~SMCM_TX;
+		clrbits8(&smcp->smc_smcm, SMCM_TX);
 	else
-		sccp->scc_sccm &= ~UART_SCCM_TX;
+		clrbits16(&sccp->scc_sccm, UART_SCCM_TX);
 }
 
 /*
@@ -184,24 +184,24 @@ static void cpm_uart_stop_tx(struct uart_port *port)
 static void cpm_uart_start_tx(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile smc_t *smcp = pinfo->smcp;
-	volatile scc_t *sccp = pinfo->sccp;
+	smc_t __iomem *smcp = pinfo->smcp;
+	scc_t __iomem *sccp = pinfo->sccp;
 
 	pr_debug("CPM uart[%d]:start tx\n", port->line);
 
 	if (IS_SMC(pinfo)) {
-		if (smcp->smc_smcm & SMCM_TX)
+		if (in_8(&smcp->smc_smcm) & SMCM_TX)
 			return;
 	} else {
-		if (sccp->scc_sccm & UART_SCCM_TX)
+		if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX)
 			return;
 	}
 
 	if (cpm_uart_tx_pump(port) != 0) {
 		if (IS_SMC(pinfo)) {
-			smcp->smc_smcm |= SMCM_TX;
+			setbits8(&smcp->smc_smcm, SMCM_TX);
 		} else {
-			sccp->scc_sccm |= UART_SCCM_TX;
+			setbits16(&sccp->scc_sccm, UART_SCCM_TX);
 		}
 	}
 }
@@ -212,15 +212,15 @@ static void cpm_uart_start_tx(struct uart_port *port)
 static void cpm_uart_stop_rx(struct uart_port *port)
 {
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile smc_t *smcp = pinfo->smcp;
-	volatile scc_t *sccp = pinfo->sccp;
+	smc_t __iomem *smcp = pinfo->smcp;
+	scc_t __iomem *sccp = pinfo->sccp;
 
 	pr_debug("CPM uart[%d]:stop rx\n", port->line);
 
 	if (IS_SMC(pinfo))
-		smcp->smc_smcm &= ~SMCM_RX;
+		clrbits8(&smcp->smc_smcm, SMCM_RX);
 	else
-		sccp->scc_sccm &= ~UART_SCCM_RX;
+		clrbits16(&sccp->scc_sccm, UART_SCCM_RX);
 }
 
 /*
@@ -263,10 +263,11 @@ static void cpm_uart_int_tx(struct uart_port *port)
 static void cpm_uart_int_rx(struct uart_port *port)
 {
 	int i;
-	unsigned char ch, *cp;
+	unsigned char ch;
+	u8 *cp;
 	struct tty_struct *tty = port->info->tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile cbd_t *bdp;
+	cbd_t __iomem *bdp;
 	u16 status;
 	unsigned int flg;
 
@@ -278,13 +279,13 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	bdp = pinfo->rx_cur;
 	for (;;) {
 		/* get status */
-		status = bdp->cbd_sc;
+		status = in_be16(&bdp->cbd_sc);
 		/* If this one is empty, return happy */
 		if (status & BD_SC_EMPTY)
 			break;
 
 		/* get number of characters, and check spce in flip-buffer */
-		i = bdp->cbd_datlen;
+		i = in_be16(&bdp->cbd_datlen);
 
 		/* If we have not enough room in tty flip buffer, then we try
 		 * later, which will be the next rx-interrupt or a timeout
@@ -295,7 +296,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 		}
 
 		/* get pointer */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+		cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
@@ -315,10 +316,11 @@ static void cpm_uart_int_rx(struct uart_port *port)
 		}		/* End while (i--) */
 
 		/* This BD is ready to be used again. Clear status. get next */
-		bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
-		bdp->cbd_sc |= BD_SC_EMPTY;
+		clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR |
+		                        BD_SC_OV | BD_SC_ID);
+		setbits16(&bdp->cbd_sc, BD_SC_EMPTY);
 
-		if (bdp->cbd_sc & BD_SC_WRAP)
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 			bdp = pinfo->rx_bd_base;
 		else
 			bdp++;
@@ -326,7 +328,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	} /* End for (;;) */
 
 	/* Write back buffer pointer */
-	pinfo->rx_cur = (volatile cbd_t *) bdp;
+	pinfo->rx_cur = bdp;
 
 	/* activate BH processing */
 	tty_flip_buffer_push(tty);
@@ -380,14 +382,14 @@ static irqreturn_t cpm_uart_int(int irq, void *data)
 	u8 events;
 	struct uart_port *port = (struct uart_port *)data;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile smc_t *smcp = pinfo->smcp;
-	volatile scc_t *sccp = pinfo->sccp;
+	smc_t __iomem *smcp = pinfo->smcp;
+	scc_t __iomem *sccp = pinfo->sccp;
 
 	pr_debug("CPM uart[%d]:IRQ\n", port->line);
 
 	if (IS_SMC(pinfo)) {
-		events = smcp->smc_smce;
-		smcp->smc_smce = events;
+		events = in_8(&smcp->smc_smce);
+		out_8(&smcp->smc_smce, events);
 		if (events & SMCM_BRKE)
 			uart_handle_break(port);
 		if (events & SMCM_RX)
@@ -395,8 +397,8 @@ static irqreturn_t cpm_uart_int(int irq, void *data)
 		if (events & SMCM_TX)
 			cpm_uart_int_tx(port);
 	} else {
-		events = sccp->scc_scce;
-		sccp->scc_scce = events;
+		events = in_be16(&sccp->scc_scce);
+		out_be16(&sccp->scc_scce, events);
 		if (events & UART_SCCM_BRKE)
 			uart_handle_break(port);
 		if (events & UART_SCCM_RX)
@@ -421,11 +423,11 @@ static int cpm_uart_startup(struct uart_port *port)
 
 	/* Startup rx-int */
 	if (IS_SMC(pinfo)) {
-		pinfo->smcp->smc_smcm |= SMCM_RX;
-		pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+		setbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
+		setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
 	} else {
-		pinfo->sccp->scc_sccm |= UART_SCCM_RX;
-		pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+		setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
+		setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
 	}
 
 	if (!(pinfo->flags & FLAG_CONSOLE))
@@ -464,13 +466,13 @@ static void cpm_uart_shutdown(struct uart_port *port)
 
 		/* Stop uarts */
 		if (IS_SMC(pinfo)) {
-			volatile smc_t *smcp = pinfo->smcp;
-			smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-			smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+			smc_t __iomem *smcp = pinfo->smcp;
+			clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
+			clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
 		} else {
-			volatile scc_t *sccp = pinfo->sccp;
-			sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-			sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+			scc_t __iomem *sccp = pinfo->sccp;
+			clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+			clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
@@ -492,8 +494,8 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	u16 cval, scval, prev_mode;
 	int bits, sbits;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	volatile smc_t *smcp = pinfo->smcp;
-	volatile scc_t *sccp = pinfo->sccp;
+	smc_t __iomem *smcp = pinfo->smcp;
+	scc_t __iomem *sccp = pinfo->sccp;
 
 	pr_debug("CPM uart[%d]:set_termios\n", port->line);
 
@@ -588,11 +590,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		 * enables, because we want to put them back if they were
 		 * present.
 		 */
-		prev_mode = smcp->smc_smcmr;
-		smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
-		smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
+		prev_mode = in_be16(&smcp->smc_smcmr);
+		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART);
+		setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN)));
 	} else {
-		sccp->scc_psmr = (sbits << 12) | scval;
+		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 
 	cpm_set_brg(pinfo->brg - 1, baud);
@@ -630,8 +632,8 @@ static int cpm_uart_verify_port(struct uart_port *port,
  */
 static int cpm_uart_tx_pump(struct uart_port *port)
 {
-	volatile cbd_t *bdp;
-	unsigned char *p;
+	cbd_t __iomem *bdp;
+	u8 *p;
 	int count;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	struct circ_buf *xmit = &port->info->xmit;
@@ -641,13 +643,14 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = pinfo->tx_cur;
 
-		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+		p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 
 		*p++ = port->x_char;
-		bdp->cbd_datlen = 1;
-		bdp->cbd_sc |= BD_SC_READY;
+
+		out_be16(&bdp->cbd_datlen, 1);
+		setbits16(&bdp->cbd_sc, BD_SC_READY);
 		/* Get next BD. */
-		if (bdp->cbd_sc & BD_SC_WRAP)
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 			bdp = pinfo->tx_bd_base;
 		else
 			bdp++;
@@ -666,9 +669,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 	/* Pick next descriptor and fill from buffer */
 	bdp = pinfo->tx_cur;
 
-	while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
+	while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) &&
+	       xmit->tail != xmit->head) {
 		count = 0;
-		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+		p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 		while (count < pinfo->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -677,11 +681,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 			if (xmit->head == xmit->tail)
 				break;
 		}
-		bdp->cbd_datlen = count;
-		bdp->cbd_sc |= BD_SC_READY;
-		eieio();
+		out_be16(&bdp->cbd_datlen, count);
+		setbits16(&bdp->cbd_sc, BD_SC_READY);
 		/* Get next BD. */
-		if (bdp->cbd_sc & BD_SC_WRAP)
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 			bdp = pinfo->tx_bd_base;
 		else
 			bdp++;
@@ -706,7 +709,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 {
 	int i;
 	u8 *mem_addr;
-	volatile cbd_t *bdp;
+	cbd_t __iomem *bdp;
 
 	pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line);
 
@@ -717,13 +720,13 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr;
 	bdp = pinfo->rx_cur = pinfo->rx_bd_base;
 	for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
-		bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
+		out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+		out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
 		mem_addr += pinfo->rx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
-	bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+	out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+	out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
 
 	/* Set the physical address of the host memory
 	 * buffers in the buffer descriptors, and the
@@ -732,19 +735,19 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 	bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 	for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
-		bdp->cbd_sc = BD_SC_INTRPT;
+		out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+		out_be16(&bdp->cbd_sc, BD_SC_INTRPT);
 		mem_addr += pinfo->tx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
-	bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
+	out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+	out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT);
 }
 
 static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 {
-	volatile scc_t *scp;
-	volatile scc_uart_t *sup;
+	scc_t __iomem *scp;
+	scc_uart_t __iomem *sup;
 
 	pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line);
 
@@ -752,8 +755,10 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 	sup = pinfo->sccup;
 
 	/* Store address */
-	pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE;
-	pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE;
+	out_be16(&pinfo->sccup->scc_genscc.scc_rbase,
+	         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+	out_be16(&pinfo->sccup->scc_genscc.scc_tbase,
+	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 	/* Set up the uart parameters in the
 	 * parameter ram.
@@ -761,25 +766,25 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 
 	cpm_set_scc_fcr(sup);
 
-	sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize;
-	sup->scc_maxidl = pinfo->rx_fifosize;
-	sup->scc_brkcr = 1;
-	sup->scc_parec = 0;
-	sup->scc_frmec = 0;
-	sup->scc_nosec = 0;
-	sup->scc_brkec = 0;
-	sup->scc_uaddr1 = 0;
-	sup->scc_uaddr2 = 0;
-	sup->scc_toseq = 0;
-	sup->scc_char1 = 0x8000;
-	sup->scc_char2 = 0x8000;
-	sup->scc_char3 = 0x8000;
-	sup->scc_char4 = 0x8000;
-	sup->scc_char5 = 0x8000;
-	sup->scc_char6 = 0x8000;
-	sup->scc_char7 = 0x8000;
-	sup->scc_char8 = 0x8000;
-	sup->scc_rccm = 0xc0ff;
+	out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
+	out_be16(&sup->scc_maxidl, pinfo->rx_fifosize);
+	out_be16(&sup->scc_brkcr, 1);
+	out_be16(&sup->scc_parec, 0);
+	out_be16(&sup->scc_frmec, 0);
+	out_be16(&sup->scc_nosec, 0);
+	out_be16(&sup->scc_brkec, 0);
+	out_be16(&sup->scc_uaddr1, 0);
+	out_be16(&sup->scc_uaddr2, 0);
+	out_be16(&sup->scc_toseq, 0);
+	out_be16(&sup->scc_char1, 0x8000);
+	out_be16(&sup->scc_char2, 0x8000);
+	out_be16(&sup->scc_char3, 0x8000);
+	out_be16(&sup->scc_char4, 0x8000);
+	out_be16(&sup->scc_char5, 0x8000);
+	out_be16(&sup->scc_char6, 0x8000);
+	out_be16(&sup->scc_char7, 0x8000);
+	out_be16(&sup->scc_char8, 0x8000);
+	out_be16(&sup->scc_rccm, 0xc0ff);
 
 	/* Send the CPM an initialize command.
 	 */
@@ -788,23 +793,23 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
 	 */
-	scp->scc_gsmrh = 0;
-	scp->scc_gsmrl =
-	    (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+	out_be32(&scp->scc_gsmrh, 0);
+	out_be32(&scp->scc_gsmrl,
+	         SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
 
 	/* Enable rx interrupts  and clear all pending events.  */
-	scp->scc_sccm = 0;
-	scp->scc_scce = 0xffff;
-	scp->scc_dsr = 0x7e7e;
-	scp->scc_psmr = 0x3000;
+	out_be16(&scp->scc_sccm, 0);
+	out_be16(&scp->scc_scce, 0xffff);
+	out_be16(&scp->scc_dsr, 0x7e7e);
+	out_be16(&scp->scc_psmr, 0x3000);
 
-	scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 }
 
 static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 {
-	volatile smc_t *sp;
-	volatile smc_uart_t *up;
+	smc_t __iomem *sp;
+	smc_uart_t __iomem *up;
 
 	pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line);
 
@@ -812,19 +817,21 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	up = pinfo->smcup;
 
 	/* Store address */
-	pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE;
-	pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE;
+	out_be16(&pinfo->smcup->smc_rbase,
+	         (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+	out_be16(&pinfo->smcup->smc_tbase,
+	         (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
 
 /*
  *  In case SMC1 is being relocated...
  */
 #if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-	up->smc_rbptr = pinfo->smcup->smc_rbase;
-	up->smc_tbptr = pinfo->smcup->smc_tbase;
-	up->smc_rstate = 0;
-	up->smc_tstate = 0;
-	up->smc_brkcr = 1;              /* number of break chars */
-	up->smc_brkec = 0;
+	out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
+	out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
+	out_be32(&up->smc_rstate, 0);
+	out_be32(&up->smc_tstate, 0);
+	out_be16(&up->smc_brkcr, 1);              /* number of break chars */
+	out_be16(&up->smc_brkec, 0);
 #endif
 
 	/* Set up the uart parameters in the
@@ -833,24 +840,24 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
 	cpm_set_smc_fcr(up);
 
 	/* Using idle charater time requires some additional tuning.  */
-	up->smc_mrblr = pinfo->rx_fifosize;
-	up->smc_maxidl = pinfo->rx_fifosize;
-	up->smc_brklen = 0;
-	up->smc_brkec = 0;
-	up->smc_brkcr = 1;
+	out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
+	out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
+	out_be16(&up->smc_brklen, 0);
+	out_be16(&up->smc_brkec, 0);
+	out_be16(&up->smc_brkcr, 1);
 
 	cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
 
 	/* Set UART mode, 8 bit, no parity, one stop.
 	 * Enable receive and transmit.
 	 */
-	sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+	out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
 
 	/* Enable only rx interrupts clear all pending events. */
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
+	out_8(&sp->smc_smcm, 0);
+	out_8(&sp->smc_smce, 0xff);
 
-	sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+	setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 }
 
 /*
@@ -868,11 +875,11 @@ static int cpm_uart_request_port(struct uart_port *port)
 		return 0;
 
 	if (IS_SMC(pinfo)) {
-		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
-		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+		clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
+		clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 	} else {
-		pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-		pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+		clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	ret = cpm_uart_allocbuf(pinfo, 0);
@@ -931,10 +938,11 @@ static struct uart_ops cpm_uart_pops = {
 #ifdef CONFIG_PPC_CPM_NEW_BINDING
 struct uart_cpm_port cpm_uart_ports[UART_NR];
 
-int cpm_uart_init_port(struct device_node *np, struct uart_cpm_port *pinfo)
+static int cpm_uart_init_port(struct device_node *np,
+                              struct uart_cpm_port *pinfo)
 {
 	const u32 *data;
-	void __iomem *mem, __iomem *pram;
+	void __iomem *mem, *pram;
 	int len;
 	int ret;
 
@@ -1169,8 +1177,8 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 	    &cpm_uart_ports[cpm_uart_port_map[co->index]];
 #endif
 	unsigned int i;
-	volatile cbd_t *bdp, *bdbase;
-	volatile unsigned char *cp;
+	cbd_t __iomem *bdp, *bdbase;
+	unsigned char *cp;
 
 	/* Get the address of the host memory buffer.
 	 */
@@ -1188,37 +1196,36 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		 * Ready indicates output is ready, and xmt is doing
 		 * that, not that it is ready for us to send.
 		 */
-		while ((bdp->cbd_sc & BD_SC_READY) != 0)
+		while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
 			;
 
 		/* Send the character out.
 		 * If the buffer address is in the CPM DPRAM, don't
 		 * convert it.
 		 */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
-
+		cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 		*cp = *s;
 
-		bdp->cbd_datlen = 1;
-		bdp->cbd_sc |= BD_SC_READY;
+		out_be16(&bdp->cbd_datlen, 1);
+		setbits16(&bdp->cbd_sc, BD_SC_READY);
 
-		if (bdp->cbd_sc & BD_SC_WRAP)
+		if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 			bdp = bdbase;
 		else
 			bdp++;
 
 		/* if a LF, also do CR... */
 		if (*s == 10) {
-			while ((bdp->cbd_sc & BD_SC_READY) != 0)
+			while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
 				;
 
-			cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
-
+			cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
 			*cp = 13;
-			bdp->cbd_datlen = 1;
-			bdp->cbd_sc |= BD_SC_READY;
 
-			if (bdp->cbd_sc & BD_SC_WRAP)
+			out_be16(&bdp->cbd_datlen, 1);
+			setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+			if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
 				bdp = bdbase;
 			else
 				bdp++;
@@ -1229,10 +1236,10 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 	 * Finally, Wait for transmitter & holding register to empty
 	 *  and restore the IER
 	 */
-	while ((bdp->cbd_sc & BD_SC_READY) != 0)
+	while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
 		;
 
-	pinfo->tx_cur = (volatile cbd_t *) bdp;
+	pinfo->tx_cur = bdp;
 }
 
 
@@ -1319,11 +1326,11 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 #endif
 
 	if (IS_SMC(pinfo)) {
-		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
-		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+		clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
+		clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
 	} else {
-		pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-		pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+		clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+		clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	}
 
 	ret = cpm_uart_allocbuf(pinfo, 1);
@@ -1354,7 +1361,7 @@ static struct console cpm_scc_uart_console = {
 	.data		= &cpm_reg,
 };
 
-int __init cpm_uart_console_init(void)
+static int __init cpm_uart_console_init(void)
 {
 	register_console(&cpm_scc_uart_console);
 	return 0;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 4647f55..52fb044 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -179,7 +179,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
 						       * pinfo->rx_fifosize);
 
-	pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+	pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
 	pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
 
 	return 0;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index cdc9b22..470b093 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -27,18 +27,18 @@ static inline void cpm_set_brg(int brg, int baud)
 	cpm_setbrg(brg, baud);
 }
 
-static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)
 {
-	sup->scc_genscc.scc_rfcr = SMC_EB;
-	sup->scc_genscc.scc_tfcr = SMC_EB;
+	out_8(&sup->scc_genscc.scc_rfcr, SMC_EB);
+	out_8(&sup->scc_genscc.scc_tfcr, SMC_EB);
 }
 
-static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)
 {
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
+	out_8(&up->smc_rfcr, SMC_EB);
+	out_8(&up->smc_tfcr, SMC_EB);
 }
 
-#define DPRAM_BASE	((unsigned char *)&cpmp->cp_dpmem[0])
+#define DPRAM_BASE	((u8 __iomem __force *)&cpmp->cp_dpmem[0])
 
 #endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 7ebce26..5bd4508 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -278,7 +278,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
 						       * pinfo->rx_fifosize);
 
-	pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+	pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
 	pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
 
 	return 0;
@@ -289,7 +289,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 	dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
 					       pinfo->rx_fifosize) +
 			  L1_CACHE_ALIGN(pinfo->tx_nrfifos *
-					 pinfo->tx_fifosize), pinfo->mem_addr,
+					 pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
 			  pinfo->dma_addr);
 
 	cpm_dpfree(pinfo->dp_addr);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index e7717ec..40006a7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -27,18 +27,18 @@ static inline void cpm_set_brg(int brg, int baud)
 	cpm_setbrg(brg, baud);
 }
 
-static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup)
 {
-	sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+	out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+	out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB);
 }
 
-static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up)
 {
-	up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+	out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+	out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB);
 }
 
-#define DPRAM_BASE	((unsigned char *)cpm_dpram_addr(0))
+#define DPRAM_BASE	((u8 __iomem __force *)cpm_dpram_addr(0))
 
 #endif
-- 
1.5.3.1

[PATCH 11/28] cpm_uart: Issue STOP_TX command before initializing console.

[Scott Wood]

This prevents some bootloader/bootwrapper characters from being lost.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/serial/cpm_uart/cpm_uart_core.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index c43706e..336e05e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1325,6 +1325,8 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	udbg_putc = NULL;
 #endif
 
+	cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
+
 	if (IS_SMC(pinfo)) {
 		clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
 		clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
@@ -1346,6 +1348,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 		cpm_uart_init_scc(pinfo);
 
 	uart_set_options(port, co, baud, parity, bits, flow);
+	cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
 
 	return 0;
 }
-- 
1.5.3.1

[PATCH 12/28] 8xx: Fix CONFIG_PIN_TLB.

[Scott Wood]

1. Move CONSISTENT_START on 8xx so that it doesn't overlap the IMMR mapping.
2. The wrong register was being loaded into SPRN_MD_RPN.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Kconfig           |    1 +
 arch/powerpc/kernel/head_8xx.S |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a3295..2622f04 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -582,6 +582,7 @@ config CONSISTENT_START_BOOL
 
 config CONSISTENT_START
 	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+	default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx)
 	default "0xff100000" if NOT_COHERENT_CACHE
 
 config CONSISTENT_SIZE_BOOL
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index a6ecdd6..0ad0d17 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -727,13 +727,13 @@ initial_mmu:
 	mtspr	SPRN_MD_TWC, r9
 	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
 
 	addis	r8, r8, 0x0080		/* Add 8M */
 	mtspr	SPRN_MD_EPN, r8
 	mtspr	SPRN_MD_TWC, r9
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
 #endif
 
 	/* Since the cache is enabled according to the information we
-- 
1.5.3.1

[PATCH 13/28] 8xx: Infrastructure code cleanup.

[Scott Wood]

1. Keep a global mpc8xx_immr mapping, rather than constantly
creating temporary mappings.
2. Look for new fsl,cpm1 and fsl,cpm1-pic names.
3. Always reset the CPM when not using the udbg console;
this is required in case the firmware initialized a device
that is incompatible with one that the kernel is about to
use.
4. Remove some superfluous casts and header includes.
5. Change a usage of IMAP_ADDR to get_immrbase().
6. Use phys_addr_t, not uint, for dpram_pbase.
7. Various sparse-related fixes, such as __iomem annotations.
8. Remove mpc8xx_show_cpuinfo, which doesn't provide anything
useful beyond the generic cpuinfo handler.
9. Move prototypes for 8xx support functions from board files
to sysdev/commproc.h.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/8xx/m8xx_setup.c      |   90 ++++++--------------------
 arch/powerpc/platforms/8xx/mpc86xads.h       |    3 -
 arch/powerpc/platforms/8xx/mpc86xads_setup.c |   10 +---
 arch/powerpc/platforms/8xx/mpc885ads.h       |    3 -
 arch/powerpc/platforms/8xx/mpc885ads_setup.c |   11 +---
 arch/powerpc/sysdev/commproc.c               |   67 +++++++++++--------
 arch/powerpc/sysdev/commproc.h               |   12 ++++
 arch/powerpc/sysdev/mpc8xx_pic.c             |   19 +++---
 include/asm-powerpc/commproc.h               |    4 +-
 include/asm-powerpc/fs_pd.h                  |   19 +----
 10 files changed, 88 insertions(+), 150 deletions(-)
 create mode 100644 arch/powerpc/sysdev/commproc.h

diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index b2b98dd..d35eda8 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -10,57 +10,33 @@
  * bootup setup stuff..
  */
 
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
 #include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
 #include <linux/interrupt.h>
-#include <linux/reboot.h>
 #include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
-#include <linux/fsl_devices.h>
 
-#include <asm/mmu.h>
-#include <asm/reg.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/mpc8xx.h>
 #include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/fs_pd.h>
 #include <mm/mmu_decl.h>
 
-#include "sysdev/mpc8xx_pic.h"
+#include <sysdev/mpc8xx_pic.h>
+#include <sysdev/commproc.h>
 
 #ifdef CONFIG_PCMCIA_M8XX
 struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
 #endif
 
 void m8xx_calibrate_decr(void);
-#ifdef CONFIG_8xx_WDT
-extern void m8xx_wdt_handler_install(bd_t *bp);
-#endif
 extern int cpm_pic_init(void);
 extern int cpm_get_irq(void);
 
 /* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
+static irqreturn_t timebase_interrupt(int irq, void *dev)
 {
 	printk ("timebase_interrupt()\n");
 
@@ -77,7 +53,7 @@ static struct irqaction tbint_irqaction = {
 void __init __attribute__ ((weak))
 init_internal_rtc(void)
 {
-	sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit);
+	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
 
 	/* Disable the RTC one second and alarm interrupts. */
 	clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
@@ -116,13 +92,13 @@ static int __init get_freq(char *name, unsigned long *val)
 void __init mpc8xx_calibrate_decr(void)
 {
 	struct device_node *cpu;
-	cark8xx_t *clk_r1;
-	car8xx_t *clk_r2;
-	sitk8xx_t *sys_tmr1;
-	sit8xx_t *sys_tmr2;
+	cark8xx_t __iomem *clk_r1;
+	car8xx_t __iomem *clk_r2;
+	sitk8xx_t __iomem *sys_tmr1;
+	sit8xx_t __iomem *sys_tmr2;
 	int irq, virq;
 
-	clk_r1 = (cark8xx_t *) immr_map(im_clkrstk);
+	clk_r1 = immr_map(im_clkrstk);
 
 	/* Unlock the SCCR. */
 	out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
@@ -130,7 +106,7 @@ void __init mpc8xx_calibrate_decr(void)
 	immr_unmap(clk_r1);
 
 	/* Force all 8xx processors to use divide by 16 processor clock. */
-	clk_r2 = (car8xx_t *) immr_map(im_clkrst);
+	clk_r2 = immr_map(im_clkrst);
 	setbits32(&clk_r2->car_sccr, 0x02000000);
 	immr_unmap(clk_r2);
 
@@ -164,7 +140,7 @@ void __init mpc8xx_calibrate_decr(void)
 	 * we guarantee the registers are locked, then we unlock them
 	 * for our use.
 	 */
-	sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk);
+	sys_tmr1 = immr_map(im_sitk);
 	out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
 	out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
 	out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
@@ -184,20 +160,13 @@ void __init mpc8xx_calibrate_decr(void)
 	virq= irq_of_parse_and_map(cpu, 0);
 	irq = irq_map[virq].hwirq;
 
-	sys_tmr2 = (sit8xx_t *) immr_map(im_sit);
+	sys_tmr2 = immr_map(im_sit);
 	out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
 					(TBSCR_TBF | TBSCR_TBE));
 	immr_unmap(sys_tmr2);
 
 	if (setup_irq(virq, &tbint_irqaction))
 		panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
-	/* Install watchdog timer handler early because it might be
-	 * already enabled by the bootloader
-	 */
-	m8xx_wdt_handler_install(binfo);
-#endif
 }
 
 /* The RTC on the MPC8xx is an internal register.
@@ -207,12 +176,12 @@ void __init mpc8xx_calibrate_decr(void)
 
 int mpc8xx_set_rtc_time(struct rtc_time *tm)
 {
-	sitk8xx_t *sys_tmr1;
-	sit8xx_t *sys_tmr2;
+	sitk8xx_t __iomem *sys_tmr1;
+	sit8xx_t __iomem *sys_tmr2;
 	int time;
 
-	sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk);
-	sys_tmr2 = (sit8xx_t *) immr_map(im_sit);
+	sys_tmr1 = immr_map(im_sitk);
+	sys_tmr2 = immr_map(im_sit);
 	time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
 	              tm->tm_hour, tm->tm_min, tm->tm_sec);
 
@@ -228,7 +197,7 @@ int mpc8xx_set_rtc_time(struct rtc_time *tm)
 void mpc8xx_get_rtc_time(struct rtc_time *tm)
 {
 	unsigned long data;
-	sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit);
+	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
 
 	/* Get time from the RTC. */
 	data = in_be32(&sys_tmr->sit_rtc);
@@ -241,8 +210,7 @@ void mpc8xx_get_rtc_time(struct rtc_time *tm)
 
 void mpc8xx_restart(char *cmd)
 {
-	__volatile__ unsigned char dummy;
-	car8xx_t * clk_r = (car8xx_t *) immr_map(im_clkrst);
+	car8xx_t __iomem *clk_r = immr_map(im_clkrst);
 
 
 	local_irq_disable();
@@ -252,26 +220,8 @@ void mpc8xx_restart(char *cmd)
 	*/
 	mtmsr(mfmsr() & ~0x1000);
 
-	dummy = in_8(&clk_r->res[0]);
-	printk("Restart failed\n");
-	while(1);
-}
-
-void mpc8xx_show_cpuinfo(struct seq_file *m)
-{
-	struct device_node *root;
-	uint memsize = total_memory;
-	const char *model = "";
-
-	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "Machine\t\t: %s\n", model);
-	of_node_put(root);
-
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+	in_8(&clk_r->res[0]);
+	panic("Restart failed\n");
 }
 
 static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h
index dd10cd2..cffa194 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads.h
+++ b/arch/powerpc/platforms/8xx/mpc86xads.h
@@ -29,9 +29,6 @@
 #define CFG_PHYDEV_ADDR		((uint)0xff0a0000)
 #define BCSR5			((uint)(CFG_PHYDEV_ADDR + 0x300))
 
-#define IMAP_ADDR		(get_immrbase())
-#define IMAP_SIZE		((uint)(64 * 1024))
-
 #define MPC8xx_CPM_OFFSET	(0x9c0)
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index 8f64f48..4901283 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -37,14 +37,7 @@
 #include <asm/fs_pd.h>
 #include <asm/prom.h>
 
-extern void cpm_reset(void);
-extern void mpc8xx_show_cpuinfo(struct seq_file*);
-extern void mpc8xx_restart(char *cmd);
-extern void mpc8xx_calibrate_decr(void);
-extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
-extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
-extern void m8xx_pic_init(void);
-extern unsigned int mpc8xx_get_irq(void);
+#include <sysdev/commproc.h>
 
 static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
 static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
@@ -277,7 +270,6 @@ define_machine(mpc86x_ads) {
 	.probe			= mpc86xads_probe,
 	.setup_arch		= mpc86xads_setup_arch,
 	.init_IRQ		= m8xx_pic_init,
-	.show_cpuinfo		= mpc8xx_show_cpuinfo,
 	.get_irq		= mpc8xx_get_irq,
 	.restart		= mpc8xx_restart,
 	.calibrate_decr		= mpc8xx_calibrate_decr,
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index 14db124..a21e528 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -29,9 +29,6 @@
 #define CFG_PHYDEV_ADDR		((uint)0xff0a0000)
 #define BCSR5			((uint)(CFG_PHYDEV_ADDR + 0x300))
 
-#define IMAP_ADDR		(get_immrbase())
-#define IMAP_SIZE		((uint)(64 * 1024))
-
 #define MPC8xx_CPM_OFFSET	(0x9c0)
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index d3da385..bb54268 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -38,15 +38,6 @@
 #include <asm/fs_pd.h>
 #include <asm/prom.h>
 
-extern void cpm_reset(void);
-extern void mpc8xx_show_cpuinfo(struct seq_file *);
-extern void mpc8xx_restart(char *cmd);
-extern void mpc8xx_calibrate_decr(void);
-extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
-extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
-extern void m8xx_pic_init(void);
-extern unsigned int mpc8xx_get_irq(void);
-
 static void init_smc1_uart_ioports(struct fs_uart_platform_info *fpi);
 static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi);
 static void init_scc3_ioports(struct fs_platform_info *ptr);
@@ -428,7 +419,7 @@ define_machine(mpc885_ads)
 {
 .name = "MPC885 ADS",.probe = mpc885ads_probe,.setup_arch =
 	    mpc885ads_setup_arch,.init_IRQ =
-	    m8xx_pic_init,.show_cpuinfo = mpc8xx_show_cpuinfo,.get_irq =
+	    m8xx_pic_init,.get_irq =
 	    mpc8xx_get_irq,.restart = mpc8xx_restart,.calibrate_decr =
 	    mpc8xx_calibrate_decr,.set_rtc_time =
 	    mpc8xx_set_rtc_time,.get_rtc_time = mpc8xx_get_rtc_time,};
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index b562afc..ddfa2e3 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -47,8 +47,9 @@
 static void m8xx_cpm_dpinit(void);
 static uint host_buffer; /* One page of host buffer */
 static uint host_end;    /* end + 1 */
-cpm8xx_t *cpmp;          /* Pointer to comm processor space */
-cpic8xx_t *cpic_reg;
+cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
+immap_t __iomem *mpc8xx_immr;
+static cpic8xx_t __iomem *cpic_reg;
 
 static struct irq_host *cpm_pic_host;
 
@@ -133,16 +134,19 @@ unsigned int cpm_pic_init(void)
 
 	pr_debug("cpm_pic_init\n");
 
-	np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
+	if (np == NULL)
+		np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
 	if (np == NULL) {
 		printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
 		return sirq;
 	}
+
 	ret = of_address_to_resource(np, 0, &res);
 	if (ret)
 		goto end;
 
-	cpic_reg = (void *)ioremap(res.start, res.end - res.start + 1);
+	cpic_reg = ioremap(res.start, res.end - res.start + 1);
 	if (cpic_reg == NULL)
 		goto end;
 
@@ -165,14 +169,16 @@ unsigned int cpm_pic_init(void)
 		sirq = NO_IRQ;
 		goto end;
 	}
-	of_node_put(np);
 
 	/* Install our own error handler. */
-	np = of_find_node_by_type(NULL, "cpm");
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
+	if (np == NULL)
+		np = of_find_node_by_type(NULL, "cpm");
 	if (np == NULL) {
 		printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
 		goto end;
 	}
+
 	eirq = irq_of_parse_and_map(np, 0);
 	if (eirq == NO_IRQ)
 		goto end;
@@ -189,21 +195,28 @@ end:
 
 void cpm_reset(void)
 {
-	cpm8xx_t *commproc;
-	sysconf8xx_t *siu_conf;
+	sysconf8xx_t __iomem *siu_conf;
 
-	commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
+	if (!mpc8xx_immr) {
+		printk(KERN_CRIT "Could not map IMMR\n");
+		return;
+	}
 
-#ifdef CONFIG_UCODE_PATCH
+	cpmp = &mpc8xx_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
 	/* Perform a reset.
 	*/
-	out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
+	out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
 
 	/* Wait for it.
 	*/
-	while (in_be16(&commproc->cp_cpcr) & CPM_CR_FLG);
+	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
+#endif
 
-	cpm_load_patch(commproc);
+#ifdef CONFIG_UCODE_PATCH
+	cpm_load_patch(cpmp);
 #endif
 
 	/* Set SDMA Bus Request priority 5.
@@ -212,16 +225,12 @@ void cpm_reset(void)
 	 * manual recommends it.
 	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 	 */
-	siu_conf = (sysconf8xx_t*)immr_map(im_siu_conf);
+	siu_conf = immr_map(im_siu_conf);
 	out_be32(&siu_conf->sc_sdcr, 1);
 	immr_unmap(siu_conf);
 
 	/* Reclaim the DP memory for our use. */
 	m8xx_cpm_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	*/
-	cpmp = commproc;
 }
 
 /* We used to do this earlier, but have to postpone as long as possible
@@ -271,20 +280,20 @@ m8xx_cpm_hostalloc(uint size)
 void
 cpm_setbrg(uint brg, uint rate)
 {
-	volatile uint	*bp;
+	u32 __iomem *bp;
 
 	/* This is good enough to get SMCs running.....
 	*/
-	bp = (uint *)&cpmp->cp_brgc1;
+	bp = &cpmp->cp_brgc1;
 	bp += brg;
 	/* The BRG has a 12-bit counter.  For really slow baud rates (or
 	 * really fast processors), we may have to further divide by 16.
 	 */
 	if (((BRG_UART_CLK / rate) - 1) < 4096)
-		*bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
+		out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
 	else
-		*bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
-						CPM_BRG_EN | CPM_BRG_DIV16;
+		out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
+		             CPM_BRG_EN | CPM_BRG_DIV16);
 }
 
 /*
@@ -299,15 +308,15 @@ static rh_block_t cpm_boot_dpmem_rh_block[16];
 static rh_info_t cpm_dpmem_info;
 
 #define CPM_DPMEM_ALIGNMENT	8
-static u8 *dpram_vbase;
-static uint dpram_pbase;
+static u8 __iomem *dpram_vbase;
+static phys_addr_t dpram_pbase;
 
-void m8xx_cpm_dpinit(void)
+static void m8xx_cpm_dpinit(void)
 {
 	spin_lock_init(&cpm_dpmem_lock);
 
-	dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
-	dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
+	dpram_vbase = cpmp->cp_dpmem;
+	dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem);
 
 	/* Initialize the info header */
 	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
@@ -383,7 +392,7 @@ void *cpm_dpram_addr(unsigned long offset)
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
 
-uint cpm_dpram_phys(u8* addr)
+uint cpm_dpram_phys(u8 *addr)
 {
 	return (dpram_pbase + (uint)(addr - dpram_vbase));
 }
diff --git a/arch/powerpc/sysdev/commproc.h b/arch/powerpc/sysdev/commproc.h
new file mode 100644
index 0000000..9155ba4
--- /dev/null
+++ b/arch/powerpc/sysdev/commproc.h
@@ -0,0 +1,12 @@
+#ifndef _POWERPC_SYSDEV_COMMPROC_H
+#define _POWERPC_SYSDEV_COMMPROC_H
+
+extern void cpm_reset(void);
+extern void mpc8xx_restart(char *cmd);
+extern void mpc8xx_calibrate_decr(void);
+extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
+extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
+extern void m8xx_pic_init(void);
+extern unsigned int mpc8xx_get_irq(void);
+
+#endif
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 565156a..7aa4ff5 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -22,7 +22,7 @@ extern int cpm_get_irq(struct pt_regs *regs);
 static struct irq_host *mpc8xx_pic_host;
 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
 static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-static sysconf8xx_t	*siu_reg;
+static sysconf8xx_t __iomem *siu_reg;
 
 int cpm_get_irq(struct pt_regs *regs);
 
@@ -159,13 +159,14 @@ static struct irq_host_ops mpc8xx_pic_host_ops = {
 int mpc8xx_pic_init(void)
 {
 	struct resource res;
-	struct device_node *np = NULL;
+	struct device_node *np;
 	int ret;
 
-	np = of_find_node_by_type(np, "mpc8xx-pic");
-
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq1-pic");
+	if (np == NULL)
+		np = of_find_node_by_type(NULL, "mpc8xx-pic");
 	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
+		printk(KERN_ERR "Could not find fsl,pq1-pic node\n");
 		return -ENOMEM;
 	}
 
@@ -173,11 +174,9 @@ int mpc8xx_pic_init(void)
 	if (ret)
 		goto out;
 
-	siu_reg = (void *)ioremap(res.start, res.end - res.start + 1);
-	if (siu_reg == NULL) {
-		ret = -EINVAL;
-		goto out;
-	}
+	siu_reg = ioremap(res.start, res.end - res.start + 1);
+	if (siu_reg == NULL)
+		return -EINVAL;
 
 	mpc8xx_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR,
 					 64, &mpc8xx_pic_host_ops, 64);
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 3972487..86fcf26 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -66,7 +66,7 @@
 /* Export the base address of the communication processor registers
  * and dual port ram.
  */
-extern	cpm8xx_t	*cpmp;		/* Pointer to comm processor */
+extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 extern unsigned long cpm_dpalloc(uint size, uint align);
 extern int cpm_dpfree(unsigned long offset);
 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
@@ -689,4 +689,6 @@ typedef struct risc_timer_pram {
 extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
 extern void cpm_free_handler(int vec);
 
+#define IMAP_ADDR		(get_immrbase())
+
 #endif /* __CPM_8XX__ */
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
index c624915..77e04d0 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/include/asm-powerpc/fs_pd.h
@@ -45,22 +45,11 @@
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 
-#define immr_map(member)						\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      sizeof( ((immap_t*)0)->member));		\
-	addr;								\
-})
-
-#define immr_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset, size);		\
-	addr;								\
-})
+extern immap_t __iomem *mpc8xx_immr;
 
-#define immr_unmap(addr)		iounmap(addr)
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) do {} while (0)
 #endif
 
 static inline int uart_baudrate(void)
-- 
1.5.3.1

Re: [PATCH 13/28] 8xx: Infrastructure code cleanup.

[David Gibson]

On Mon, Sep 17, 2007 at 11:57:42AM -0500, Scott Wood wrote:
> 1. Keep a global mpc8xx_immr mapping, rather than constantly
> creating temporary mappings.

Nice, but again, it seems a bit pointless to leave in all the
immr_map() / immr_unmap() pairs now that they do basically nothing.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 13/28] 8xx: Infrastructure code cleanup.

[Scott Wood]

On Wed, Sep 19, 2007 at 02:25:33PM +1000, David Gibson wrote:
> On Mon, Sep 17, 2007 at 11:57:42AM -0500, Scott Wood wrote:
> > 1. Keep a global mpc8xx_immr mapping, rather than constantly
> > creating temporary mappings.
> 
> Nice, but again, it seems a bit pointless to leave in all the
> immr_map() / immr_unmap() pairs now that they do basically nothing.

One step at a time. :-)

Once arch/ppc is gone, I'd like to do some heavier cleanup of the CPM
stuff, including merging with QE.  For now, I want to touch code that's
shared between the architectures as little as possible.

-Scott

[PATCH 14/28] 8xx: Add pin and clock setting functions.

[Scott Wood]

These let board code set up pins and clocks without having to
put magic numbers directly into the registers.

The clock function is mostly duplicated from the cpm2 version;
hopefully this stuff can be merged at some point.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/commproc.c |  201 ++++++++++++++++++++++++++++++++++++++++
 include/asm-powerpc/commproc.h |   49 ++++++++++
 2 files changed, 250 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index ddfa2e3..e37f0a8 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -397,3 +397,204 @@ uint cpm_dpram_phys(u8 *addr)
 	return (dpram_pbase + (uint)(addr - dpram_vbase));
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
+
+struct cpm_ioport16 {
+	__be16 dir, par, sor, dat, intr;
+	__be16 res[3];
+};
+
+struct cpm_ioport32 {
+	__be32 dir, par, sor;
+};
+
+static void cpm1_set_pin32(int port, int pin, int flags)
+{
+	struct cpm_ioport32 __iomem *iop;
+	pin = 1 << (31 - pin);
+
+	if (port == CPM_PORTB)
+		iop = (struct cpm_ioport32 __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pbdir;
+	else
+		iop = (struct cpm_ioport32 __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pedir;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop->dir, pin);
+	else
+		clrbits32(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop->par, pin);
+	else
+		clrbits32(&iop->par, pin);
+
+	if (port == CPM_PORTE) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits32(&iop->sor, pin);
+		else
+			clrbits32(&iop->sor, pin);
+
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+		else
+			clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+	}
+}
+
+static void cpm1_set_pin16(int port, int pin, int flags)
+{
+	struct cpm_ioport16 __iomem *iop =
+		(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
+
+	pin = 1 << (15 - pin);
+
+	if (port != 0)
+		iop += port - 1;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits16(&iop->dir, pin);
+	else
+		clrbits16(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits16(&iop->par, pin);
+	else
+		clrbits16(&iop->par, pin);
+
+	if (port == CPM_PORTC) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits16(&iop->sor, pin);
+		else
+			clrbits16(&iop->sor, pin);
+	}
+}
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags)
+{
+	if (port == CPM_PORTB || port == CPM_PORTE)
+		cpm1_set_pin32(port, pin, flags);
+	else
+		cpm1_set_pin16(port, pin, flags);
+}
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int shift;
+	int i, bits = 0;
+	u32 __iomem *reg;
+	u32 mask = 7;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_SCC1, CPM_BRG1, 0},
+		{CPM_CLK_SCC1, CPM_BRG2, 1},
+		{CPM_CLK_SCC1, CPM_BRG3, 2},
+		{CPM_CLK_SCC1, CPM_BRG4, 3},
+		{CPM_CLK_SCC1, CPM_CLK1, 4},
+		{CPM_CLK_SCC1, CPM_CLK2, 5},
+		{CPM_CLK_SCC1, CPM_CLK3, 6},
+		{CPM_CLK_SCC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC2, CPM_BRG1, 0},
+		{CPM_CLK_SCC2, CPM_BRG2, 1},
+		{CPM_CLK_SCC2, CPM_BRG3, 2},
+		{CPM_CLK_SCC2, CPM_BRG4, 3},
+		{CPM_CLK_SCC2, CPM_CLK1, 4},
+		{CPM_CLK_SCC2, CPM_CLK2, 5},
+		{CPM_CLK_SCC2, CPM_CLK3, 6},
+		{CPM_CLK_SCC2, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC3, CPM_BRG1, 0},
+		{CPM_CLK_SCC3, CPM_BRG2, 1},
+		{CPM_CLK_SCC3, CPM_BRG3, 2},
+		{CPM_CLK_SCC3, CPM_BRG4, 3},
+		{CPM_CLK_SCC3, CPM_CLK5, 4},
+		{CPM_CLK_SCC3, CPM_CLK6, 5},
+		{CPM_CLK_SCC3, CPM_CLK7, 6},
+		{CPM_CLK_SCC3, CPM_CLK8, 7},
+
+		{CPM_CLK_SCC4, CPM_BRG1, 0},
+		{CPM_CLK_SCC4, CPM_BRG2, 1},
+		{CPM_CLK_SCC4, CPM_BRG3, 2},
+		{CPM_CLK_SCC4, CPM_BRG4, 3},
+		{CPM_CLK_SCC4, CPM_CLK5, 4},
+		{CPM_CLK_SCC4, CPM_CLK6, 5},
+		{CPM_CLK_SCC4, CPM_CLK7, 6},
+		{CPM_CLK_SCC4, CPM_CLK8, 7},
+
+		{CPM_CLK_SMC1, CPM_BRG1, 0},
+		{CPM_CLK_SMC1, CPM_BRG2, 1},
+		{CPM_CLK_SMC1, CPM_BRG3, 2},
+		{CPM_CLK_SMC1, CPM_BRG4, 3},
+		{CPM_CLK_SMC1, CPM_CLK1, 4},
+		{CPM_CLK_SMC1, CPM_CLK2, 5},
+		{CPM_CLK_SMC1, CPM_CLK3, 6},
+		{CPM_CLK_SMC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SMC2, CPM_BRG1, 0},
+		{CPM_CLK_SMC2, CPM_BRG2, 1},
+		{CPM_CLK_SMC2, CPM_BRG3, 2},
+		{CPM_CLK_SMC2, CPM_BRG4, 3},
+		{CPM_CLK_SMC2, CPM_CLK5, 4},
+		{CPM_CLK_SMC2, CPM_CLK6, 5},
+		{CPM_CLK_SMC2, CPM_CLK7, 6},
+		{CPM_CLK_SMC2, CPM_CLK8, 7},
+	};
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 0;
+		break;
+
+	case CPM_CLK_SCC2:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 8;
+		break;
+
+	case CPM_CLK_SCC3:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 16;
+		break;
+
+	case CPM_CLK_SCC4:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 24;
+		break;
+
+	case CPM_CLK_SMC1:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 12;
+		break;
+
+	case CPM_CLK_SMC2:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 28;
+		break;
+
+	default:
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
+		shift += 3;
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(clk_map)) {
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
+		return -EINVAL;
+	}
+
+	bits <<= shift;
+	mask <<= shift;
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	return 0;
+}
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 86fcf26..5dec324 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -691,4 +691,53 @@ extern void cpm_free_handler(int vec);
 
 #define IMAP_ADDR		(get_immrbase())
 
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+	CPM_PORTA,
+	CPM_PORTB,
+	CPM_PORTC,
+	CPM_PORTD,
+	CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
 #endif /* __CPM_8XX__ */
-- 
1.5.3.1

[PATCH 15/28] 8xx: Work around CPU15 erratum.

[Scott Wood]

The CPU15 erratum on MPC8xx chips can cause incorrect code execution
under certain circumstances, where there is a conditional or indirect
branch in the last word of a page, with a target in the last cache line
of the next page.  This patch implements one of the suggested
workarounds, by forcing a TLB miss whenever execution crosses a page
boundary.  This is done by invalidating the pages before and after the
one being loaded into the TLB in the ITLB miss handler.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_8xx.S     |    6 ++++++
 arch/powerpc/platforms/8xx/Kconfig |   16 ++++++++++++++++
 2 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 0ad0d17..1cefa84 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -298,6 +298,12 @@ InstructionTLBMiss:
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+#ifdef CONFIG_8xx_CPU15
+	addi	r11, r10, 0x1000
+	tlbie	r11
+	addi	r11, r10, -0x1000
+	tlbie	r11
+#endif
 	DO_8xx_CPU6(0x3780, r3)
 	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 8ecd01a..322b155 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -100,6 +100,22 @@ config 8xx_CPU6
 
 	  If in doubt, say N here.
 
+config 8xx_CPU15
+	bool "CPU15 Silicon Errata"
+	default y
+	help
+	  This enables a workaround for erratum CPU15 on MPC8xx chips.
+	  This bug can cause incorrect code execution under certain
+	  circumstances.  This workaround adds some overhead (a TLB miss
+	  every time execution crosses a page boundary), and you may wish
+	  to disable it if you have worked around the bug in the compiler
+	  (by not placing conditional branches or branches to LR or CTR
+	  in the last word of a page, with a target of the last cache
+	  line in the next page), or if you have used some other
+	  workaround.
+
+	  If in doubt, say Y here.
+
 choice
 	prompt "Microcode patch selection"
 	default NO_UCODE_PATCH
-- 
1.5.3.1

[PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Scott Wood]

On arch/ppc, Soft_emulate_8xx was used when full math emulation was
turned off to emulate a minimal subset of floating point load/store
instructions, to avoid needing a soft-float toolchain.  This function
is called, but not present, on arch/powerpc, causing a build error
if floating point emulation is turned off.

As:
1. soft-float toolchains are now common,
2. partial emulation could mislead someone into thinking they have
a soft-float userspace because things usually work, only to have it
fail when actual FP gets executed under unusual circumstances, and
3. full emulation is still available for those who need to run
non-soft-float userspace,

I'm deleting the call rather than moving Soft_emulate_8xx over to
arch/powerpc.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/traps.c |   16 +++-------------
 1 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index ccfc99d..7398beb 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -896,9 +896,10 @@ void performance_monitor_exception(struct pt_regs *regs)
 #ifdef CONFIG_8xx
 void SoftwareEmulation(struct pt_regs *regs)
 {
+#ifdef CONFIG_MATH_EMULATION
 	extern int do_mathemu(struct pt_regs *);
-	extern int Soft_emulate_8xx(struct pt_regs *);
 	int errcode;
+#endif
 
 	CHECK_FULL_REGS(regs);
 
@@ -929,18 +930,7 @@ void SoftwareEmulation(struct pt_regs *regs)
 	}
 
 #else
-	errcode = Soft_emulate_8xx(regs);
-	switch (errcode) {
-	case 0:
-		emulate_single_step(regs);
-		return;
-	case 1:
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	case -EFAULT:
-		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-		return;
-	}
+	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 #endif
 }
 #endif /* CONFIG_8xx */
-- 
1.5.3.1

Re: [PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Kumar Gala]

On Sep 17, 2007, at 11:57 AM, Scott Wood wrote:

> On arch/ppc, Soft_emulate_8xx was used when full math emulation was
> turned off to emulate a minimal subset of floating point load/store
> instructions, to avoid needing a soft-float toolchain.  This function
> is called, but not present, on arch/powerpc, causing a build error
> if floating point emulation is turned off.
>
> As:
> 1. soft-float toolchains are now common,
> 2. partial emulation could mislead someone into thinking they have
> a soft-float userspace because things usually work, only to have it
> fail when actual FP gets executed under unusual circumstances, and
> 3. full emulation is still available for those who need to run
> non-soft-float userspace,
>
> I'm deleting the call rather than moving Soft_emulate_8xx over to
> arch/powerpc.
>
> Signed-off-by: Scott Wood <scottwood@freescale.com>

I'm still not in favor of this and think we should move the  
Soft_emulate_8xx code over.

- k

Re: [PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Scott Wood]

On Tue, Sep 18, 2007 at 10:08:50AM -0500, Kumar Gala wrote:
> 
> On Sep 17, 2007, at 11:57 AM, Scott Wood wrote:
> 
> >On arch/ppc, Soft_emulate_8xx was used when full math emulation was
> >turned off to emulate a minimal subset of floating point load/store
> >instructions, to avoid needing a soft-float toolchain.  This function
> >is called, but not present, on arch/powerpc, causing a build error
> >if floating point emulation is turned off.
> >
> >As:
> >1. soft-float toolchains are now common,
> >2. partial emulation could mislead someone into thinking they have
> >a soft-float userspace because things usually work, only to have it
> >fail when actual FP gets executed under unusual circumstances, and
> >3. full emulation is still available for those who need to run
> >non-soft-float userspace,
> >
> >I'm deleting the call rather than moving Soft_emulate_8xx over to
> >arch/powerpc.
> >
> >Signed-off-by: Scott Wood <scottwood@freescale.com>
> 
> I'm still not in favor of this and think we should move the  
> Soft_emulate_8xx code over.

Any particular reasons that outweigh the reasons I gave, especially #2?

-Scott

Re: [PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Kumar Gala]

On Sep 18, 2007, at 10:11 AM, Scott Wood wrote:

> On Tue, Sep 18, 2007 at 10:08:50AM -0500, Kumar Gala wrote:
>>
>> On Sep 17, 2007, at 11:57 AM, Scott Wood wrote:
>>
>>> On arch/ppc, Soft_emulate_8xx was used when full math emulation was
>>> turned off to emulate a minimal subset of floating point load/store
>>> instructions, to avoid needing a soft-float toolchain.  This  
>>> function
>>> is called, but not present, on arch/powerpc, causing a build error
>>> if floating point emulation is turned off.
>>>
>>> As:
>>> 1. soft-float toolchains are now common,
>>> 2. partial emulation could mislead someone into thinking they have
>>> a soft-float userspace because things usually work, only to have it
>>> fail when actual FP gets executed under unusual circumstances, and
>>> 3. full emulation is still available for those who need to run
>>> non-soft-float userspace,
>>>
>>> I'm deleting the call rather than moving Soft_emulate_8xx over to
>>> arch/powerpc.
>>>
>>> Signed-off-by: Scott Wood <scottwood@freescale.com>
>>
>> I'm still not in favor of this and think we should move the
>> Soft_emulate_8xx code over.
>
> Any particular reasons that outweigh the reasons I gave, especially  
> #2?

Mainly that 8xx has been doing this for a vast number of years and I  
see no reason to stop doing it at this point.

While I can see that it might be misleading, clearly 8xx linux users  
haven't had issues with it.

- k

Re: [PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Scott Wood]

On Tue, Sep 18, 2007 at 10:19:05AM -0500, Kumar Gala wrote:
> Mainly that 8xx has been doing this for a vast number of years and I  
> see no reason to stop doing it at this point.
> 
> While I can see that it might be misleading, clearly 8xx linux users  
> haven't had issues with it.

Or they haven't said anything. :-P

How about a three-way choice of full emulation, minimal emulation, and no
emulation?

-Scott

Re: [PATCH 16/28] 8xx: Don't call non-existent Soft_emulate_8xx from SoftwareEmulation.

[Kumar Gala]

On Sep 18, 2007, at 10:23 AM, Scott Wood wrote:

> On Tue, Sep 18, 2007 at 10:19:05AM -0500, Kumar Gala wrote:
>> Mainly that 8xx has been doing this for a vast number of years and I
>> see no reason to stop doing it at this point.
>>
>> While I can see that it might be misleading, clearly 8xx linux users
>> haven't had issues with it.
>
> Or they haven't said anything. :-P

:)

> How about a three-way choice of full emulation, minimal emulation,  
> and no
> emulation?

I think I'd be ok with that.

- k

[PATCH 17/28] 8xx: Set initial memory limit.

[Scott Wood]

From: John Traill <john.traill@freescale.com>

The 8xx can only support a max of 8M during early boot (it seems a lot of
8xx boards only have 8M so the bug was never triggered), but the early
allocator isn't aware of this.  The following change makes it able to run
with larger memory.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/init_32.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index d65995a..e09513a 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -132,6 +132,9 @@ void __init MMU_init(void)
 	/* 601 can only access 16MB at the moment */
 	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
 		__initial_memory_limit = 0x01000000;
+	/* 8xx can only access 8MB at the moment */
+	if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
+		__initial_memory_limit = 0x00800000;
 
 	/* parse args from command line */
 	MMU_setup();
-- 
1.5.3.1

[PATCH 18/28] 8xx: mpc885ads cleanup

[Scott Wood]

It now uses the new CPM binding and the generic pin/clock functions, and
has assorted fixes and cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/mpc885ads.dts          |  195 +++++++-----
 arch/powerpc/configs/mpc885_ads_defconfig    |  297 +++++++++--------
 arch/powerpc/platforms/8xx/Kconfig           |    1 +
 arch/powerpc/platforms/8xx/mpc885ads.h       |   38 ---
 arch/powerpc/platforms/8xx/mpc885ads_setup.c |  450 +++++++++-----------------
 5 files changed, 423 insertions(+), 558 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index e9aa9d0..cbcd16f 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -2,6 +2,7 @@
  * MPC885 ADS Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -12,7 +13,7 @@
 
 / {
 	model = "MPC885ADS";
-	compatible = "mpc8xx";
+	compatible = "fsl,mpc885ads";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -23,156 +24,188 @@
 		PowerPC,885@0 {
 			device_type = "cpu";
 			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <2000>;		// L1, 8K
-			i-cache-size = <2000>;		// L1, 8K
+			d-cache-line-size = <d#16>;
+			i-cache-line-size = <d#16>;
+			d-cache-size = <d#8192>;
+			i-cache-size = <d#8192>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 			interrupts = <f 2>;	// decrementer interrupt
-			interrupt-parent = <&Mpc8xx_pic>;
+			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 800000>;
+		reg = <0 0>;
 	};
 
-	soc885@ff000000 {
+	localbus@ff000100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <ff000100 40>;
+
+		ranges = <
+			0 0 fe000000 00800000
+			1 0 ff080000 00008000
+			5 0 ff0a0000 00008000
+		>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0 0 800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <1 0 20 5 300 4>;
+			compatible = "fsl,mpc885ads-bcsr";
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 ff000000 00100000>;
-		reg = <ff000000 00000200>;
+		ranges = <0 ff000000 00004000>;
 		bus-frequency = <0>;
-		mdio@e80 {
-			device_type = "mdio";
-			compatible = "fs_enet";
-			reg = <e80 8>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <ff000000 4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <e00 188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			Phy0: ethernet-phy@0 {
+
+			PHY0: ethernet-phy@0 {
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			Phy1: ethernet-phy@1 {
+
+			PHY1: ethernet-phy@1 {
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-			Phy2: ethernet-phy@2 {
+
+			PHY2: ethernet-phy@2 {
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
 		};
 
-		fec@e00 {
+		ethernet@e00 {
 			device_type = "network";
-			compatible = "fs_enet";
-			model = "FEC";
-			device-id = <1>;
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
 			reg = <e00 188>;
-			mac-address = [ 00 00 0C 00 01 FD ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
-			interrupt-parent = <&Mpc8xx_pic>;
-			phy-handle = <&Phy1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
 		};
 
-		fec@1e00 {
+		ethernet@1e00 {
 			device_type = "network";
-			compatible = "fs_enet";
-			model = "FEC";
-			device-id = <2>;
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
 			reg = <1e00 188>;
-			mac-address = [ 00 00 0C 00 02 FD ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <7 1>;
-			interrupt-parent = <&Mpc8xx_pic>;
-			phy-handle = <&Phy2>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
 		};
 
-		Mpc8xx_pic: pic@ff000000 {
+		PIC: interrupt-controller@0 {
 			interrupt-controller;
-			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0 24>;
-			device_type = "mpc8xx-pic";
-			compatible = "CPM";
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 		};
 
-		pcmcia@0080 {
+		pcmcia@80 {
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			compatible = "fsl,pq-pcmcia";
 			device_type = "pcmcia";
 			reg = <80 80>;
-			interrupt-parent = <&Mpc8xx_pic>;
+			interrupt-parent = <&PIC>;
 			interrupts = <d 1>;
 		};
 
-		cpm@ff000000 {
+		cpm@9c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			device_type = "cpm";
-			model = "CPM";
-			ranges = <0 0 4000>;
-			reg = <860 f0>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
 			command-proc = <9c0>;
-			brg-frequency = <0>;
-			interrupts = <0 2>;	// cpm error interrupt
-			interrupt-parent = <&Cpm_pic>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <9c0 40 2000 1c00>;
+			ranges;
 
-			Cpm_pic: pic@930 {
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				reg = <9f0 10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
 				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
+				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
-				interrupt-parent = <&Mpc8xx_pic>;
+				interrupt-parent = <&PIC>;
 				reg = <930 20>;
-				device_type = "cpm-pic";
-				compatible = "CPM";
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
 			};
 
-			smc@a80 {
+			serial@a80 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SMC";
-				device-id = <1>;
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
 				reg = <a80 10 3e80 40>;
-				clock-setup = <00ffffff 0>;
-				rx-clock = <1>;
-				tx-clock = <1>;
-				current-speed = <0>;
-				interrupts = <4 3>;
-				interrupt-parent = <&Cpm_pic>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0090>;
 			};
 
-			smc@a90 {
+			serial@a90 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SMC";
-				device-id = <2>;
-				reg = <a90 20 3f80 40>;
-				clock-setup = <ff00ffff 90000>;
-				rx-clock = <2>;
-				tx-clock = <2>;
-				current-speed = <0>;
-				interrupts = <3 3>;
-				interrupt-parent = <&Cpm_pic>;
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <a90 10 3f80 40>;
+				interrupts = <3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <00d0>;
 			};
 
-			scc@a40 {
+			ethernet@a40 {
 				device_type = "network";
-				compatible = "fs_enet";
-				model = "SCC";
-				device-id = <3>;
-				reg = <a40 18 3e00 80>;
-				mac-address = [ 00 00 0C 00 03 FD ];
-				interrupts = <1c 3>;
-				interrupt-parent = <&Cpm_pic>;
-				phy-handle = <&Phy2>;
+				compatible = "fsl,mpc885-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <a40 18 3e00 100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <1c>;
+				interrupt-parent = <&CPM_PIC>;
+				phy-handle = <&PHY2>;
+				fsl,cpm-command = <0080>;
+				linux,network-index = <2>;
 			};
 		};
 	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@a80";
+	};
 };
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index d27e1f8..482d99d 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:45 2007
+# Linux kernel version: 2.6.23-rc3
+# Mon Aug 27 15:23:16 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -69,24 +70,25 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
+# CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -100,14 +102,14 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="deadline"
 
 #
 # Platform support
@@ -120,6 +122,7 @@ CONFIG_CPM1=y
 # CONFIG_MPC8XXFADS is not set
 # CONFIG_MPC86XADS is not set
 CONFIG_MPC885ADS=y
+# CONFIG_PPC_EP88XC is not set
 
 #
 # Freescale Ethernet driver platform-specific options
@@ -137,6 +140,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
 #
 CONFIG_8xx_COPYBACK=y
 # CONFIG_8xx_CPU6 is not set
+CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
 # CONFIG_USB_SOF_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
@@ -153,23 +157,23 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
+# CONFIG_MATH_EMULATION is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -185,11 +189,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_PROC_DEVICETREE is not set
+CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="mpc885ads.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -206,6 +211,7 @@ CONFIG_FSL_SOC=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
+# CONFIG_PCCARD is not set
 
 #
 # Advanced setup
@@ -234,10 +240,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -257,9 +259,9 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -319,22 +321,91 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -368,16 +439,15 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FIXED_MII_10_FDX=y
-# CONFIG_FIXED_MII_100_FDX is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
+# CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -397,55 +467,12 @@ CONFIG_NETDEV_10000=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -493,20 +520,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
 
 #
 # Multifunction device drivers
@@ -530,7 +544,7 @@ CONFIG_DAB=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 
@@ -538,22 +552,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Sound
 #
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
@@ -580,19 +579,9 @@ CONFIG_USB_SUPPORT=y
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -601,10 +590,9 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -645,6 +633,7 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -711,15 +700,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Library routines
 #
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
+# CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
@@ -734,11 +721,33 @@ CONFIG_HAS_DMA=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 322b155..0d4ff0a 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -26,6 +26,7 @@ config MPC86XADS
 config MPC885ADS
 	bool "MPC885ADS"
 	select CPM1
+	select PPC_CPM_NEW_BINDING
 	help
 	  Freescale Semiconductor MPC885 Application Development System (ADS).
 	  Also known as DUET.
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index a21e528..a507666 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -17,25 +17,10 @@
 
 #include <sysdev/fsl_soc.h>
 
-/* U-Boot maps BCSR to 0xff080000 */
-#define BCSR_ADDR		((uint)0xff080000)
-#define BCSR_SIZE		((uint)32)
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define CFG_PHYDEV_ADDR		((uint)0xff0a0000)
-#define BCSR5			((uint)(CFG_PHYDEV_ADDR + 0x300))
-
 #define MPC8xx_CPM_OFFSET	(0x9c0)
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
 
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
 /* Bits of interest in the BCSRs.
  */
 #define BCSR1_ETHEN		((uint)0x20000000)
@@ -64,28 +49,5 @@
 #define BCSR5_MII1_EN		0x02
 #define BCSR5_MII1_RST		0x01
 
-/* Interrupt level assignments */
-#define PHY_INTERRUPT	SIU_IRQ7	/* PHY link change interrupt */
-#define SIU_INT_FEC1	SIU_LEVEL1	/* FEC1 interrupt */
-#define SIU_INT_FEC2	SIU_LEVEL3	/* FEC2 interrupt */
-#define FEC_INTERRUPT	SIU_INT_FEC1	/* FEC interrupt */
-
-/* We don't use the 8259 */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC3 */
-#define PA_ENET_RXD	((ushort)0x0040)
-#define PA_ENET_TXD	((ushort)0x0080)
-#define PE_ENET_TCLK	((uint)0x00004000)
-#define PE_ENET_RCLK	((uint)0x00008000)
-#define PE_ENET_TENA	((uint)0x00000010)
-#define PC_ENET_CLSN	((ushort)0x0400)
-#define PC_ENET_RENA	((ushort)0x0800)
-
-/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
- * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
-#define SICR_ENET_MASK	((uint)0x00ff0000)
-#define SICR_ENET_CLKRT	((uint)0x002c0000)
-
 #endif /* __ASM_MPC885ADS_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index bb54268..03a55f4 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -1,11 +1,13 @@
-/*arch/powerpc/platforms/8xx/mpc885ads_setup.c
- *
+/*
  * Platform setup for the Freescale mpc885ads board
  *
  * Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * Copyright 2005 MontaVista Software Inc.
  *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
@@ -18,7 +20,6 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/delay.h>
-#include <linux/root_dev.h>
 
 #include <linux/fs_enet_pd.h>
 #include <linux/fs_uart_pd.h>
@@ -36,32 +37,25 @@
 #include <asm/8xx_immap.h>
 #include <asm/commproc.h>
 #include <asm/fs_pd.h>
-#include <asm/prom.h>
+#include <asm/of_platform.h>
+#include <asm/udbg.h>
 
-static void init_smc1_uart_ioports(struct fs_uart_platform_info *fpi);
-static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi);
-static void init_scc3_ioports(struct fs_platform_info *ptr);
+#include <sysdev/commproc.h>
+
+static u32 __iomem *bcsr, *bcsr5;
 
 #ifdef CONFIG_PCMCIA_M8XX
 static void pcmcia_hw_setup(int slot, int enable)
 {
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
 	if (enable)
-		clrbits32(bcsr_io, BCSR1_PCCEN);
+		clrbits32(&bcsr[1], BCSR1_PCCEN);
 	else
-		setbits32(bcsr_io, BCSR1_PCCEN);
-
-	iounmap(bcsr_io);
+		setbits32(&bcsr[1], BCSR1_PCCEN);
 }
 
 static int pcmcia_set_voltage(int slot, int vcc, int vpp)
 {
 	u32 reg = 0;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
 
 	switch (vcc) {
 	case 0:
@@ -96,330 +90,196 @@ static int pcmcia_set_voltage(int slot, int vcc, int vpp)
 	}
 
 	/* first, turn off all power */
-	clrbits32(bcsr_io, 0x00610000);
+	clrbits32(&bcsr[1], 0x00610000);
 
 	/* enable new powersettings */
-	setbits32(bcsr_io, reg);
+	setbits32(&bcsr[1], reg);
 
-	iounmap(bcsr_io);
 	return 0;
 }
 #endif
 
-void __init mpc885ads_board_setup(void)
-{
-	cpm8xx_t *cp;
-	unsigned int *bcsr_io;
-	u8 tmpval8;
-
-#ifdef CONFIG_FS_ENET
-	iop8xx_t *io_port;
-#endif
+struct cpm_pin {
+	int port, pin, flags;
+};
 
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-	cp = (cpm8xx_t *) immr_map(im_cpm);
+static struct cpm_pin mpc885ads_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
 
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR\n");
-		return;
-	}
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	clrbits32(bcsr_io, BCSR1_RS232EN_1);
-	clrbits32(&cp->cp_simode, 0xe0000000 >> 17);	/* brg1 */
-	tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
-	out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
-	clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);	/* brg1 */
-#else
-	setbits32(bcsr_io, BCSR1_RS232EN_1);
-	out_be16(&cp->cp_smc[0].smc_smcmr, 0);
-	out_8(&cp->cp_smc[0].smc_smce, 0);
+	/* SMC2 */
+#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
 #endif
 
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	clrbits32(bcsr_io, BCSR1_RS232EN_2);
-	clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
-	setbits32(&cp->cp_simode, 0x20000000 >> 1);	/* brg2 */
-	tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
-	out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
-	clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
-
-	init_smc2_uart_ioports(0);
-#else
-	setbits32(bcsr_io, BCSR1_RS232EN_2);
-	out_be16(&cp->cp_smc[1].smc_smcmr, 0);
-	out_8(&cp->cp_smc[1].smc_smce, 0);
-#endif
-	immr_unmap(cp);
-	iounmap(bcsr_io);
-
-#ifdef CONFIG_FS_ENET
-	/* use MDC for MII (common) */
-	io_port = (iop8xx_t *) immr_map(im_ioport);
-	setbits16(&io_port->iop_pdpar, 0x0080);
-	clrbits16(&io_port->iop_pddir, 0x0080);
-
-	bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
-	clrbits32(bcsr_io, BCSR5_MII1_EN);
-	clrbits32(bcsr_io, BCSR5_MII1_RST);
-#ifndef CONFIG_FC_ENET_HAS_SCC
-	clrbits32(bcsr_io, BCSR5_MII2_EN);
-	clrbits32(bcsr_io, BCSR5_MII2_RST);
-
+	/* SCC3 */
+	{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+	{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+	{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
+	{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
+
+	/* MII1 */
+	{CPM_PORTA, 0, CPM_PIN_INPUT},
+	{CPM_PORTA, 1, CPM_PIN_INPUT},
+	{CPM_PORTA, 2, CPM_PIN_INPUT},
+	{CPM_PORTA, 3, CPM_PIN_INPUT},
+	{CPM_PORTA, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTB, 19, CPM_PIN_INPUT},
+	{CPM_PORTB, 31, CPM_PIN_INPUT},
+	{CPM_PORTC, 12, CPM_PIN_INPUT},
+	{CPM_PORTC, 13, CPM_PIN_INPUT},
+	{CPM_PORTE, 30, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+	/* MII2 */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 16, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 21, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 22, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 23, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 24, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 25, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 26, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 27, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
 #endif
-	iounmap(bcsr_io);
-	immr_unmap(io_port);
+};
 
-#endif
-
-#ifdef CONFIG_PCMCIA_M8XX
-	/*Set up board specific hook-ups */
-	m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
-	m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
-#endif
-}
-
-static void init_fec1_ioports(struct fs_platform_info *ptr)
+static void __init init_ioports(void)
 {
-	cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
-	iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
-
-	/* configure FEC1 pins  */
-	setbits16(&io_port->iop_papar, 0xf830);
-	setbits16(&io_port->iop_padir, 0x0830);
-	clrbits16(&io_port->iop_padir, 0xf000);
-
-	setbits32(&cp->cp_pbpar, 0x00001001);
-	clrbits32(&cp->cp_pbdir, 0x00001001);
+	int i;
 
-	setbits16(&io_port->iop_pcpar, 0x000c);
-	clrbits16(&io_port->iop_pcdir, 0x000c);
+	for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
+		struct cpm_pin *pin = &mpc885ads_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
 
-	setbits32(&cp->cp_pepar, 0x00000003);
-	setbits32(&cp->cp_pedir, 0x00000003);
-	clrbits32(&cp->cp_peso, 0x00000003);
-	clrbits32(&cp->cp_cptr, 0x00000100);
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
 
-	immr_unmap(io_port);
-	immr_unmap(cp);
+	/* Set FEC1 and FEC2 to MII mode */
+	clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
 }
 
-static void init_fec2_ioports(struct fs_platform_info *ptr)
+static void __init mpc885ads_setup_arch(void)
 {
-	cpm8xx_t *cp = (cpm8xx_t *) immr_map(im_cpm);
-	iop8xx_t *io_port = (iop8xx_t *) immr_map(im_ioport);
-
-	/* configure FEC2 pins */
-	setbits32(&cp->cp_pepar, 0x0003fffc);
-	setbits32(&cp->cp_pedir, 0x0003fffc);
-	clrbits32(&cp->cp_peso, 0x000087fc);
-	setbits32(&cp->cp_peso, 0x00037800);
-	clrbits32(&cp->cp_cptr, 0x00000080);
-
-	immr_unmap(io_port);
-	immr_unmap(cp);
-}
+	struct device_node *np;
 
-void init_fec_ioports(struct fs_platform_info *fpi)
-{
-	int fec_no = fs_get_fec_index(fpi->fs_no);
+	cpm_reset();
+	init_ioports();
 
-	switch (fec_no) {
-	case 0:
-		init_fec1_ioports(fpi);
-		break;
-	case 1:
-		init_fec2_ioports(fpi);
-		break;
-	default:
-		printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
+	if (!np) {
+		printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
 		return;
 	}
-}
 
-static void init_scc3_ioports(struct fs_platform_info *fpi)
-{
-	unsigned *bcsr_io;
-	iop8xx_t *io_port;
-	cpm8xx_t *cp;
+	bcsr = of_iomap(np, 0);
+	bcsr5 = of_iomap(np, 1);
+	of_node_put(np);
 
-	bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
-	io_port = (iop8xx_t *) immr_map(im_ioport);
-	cp = (cpm8xx_t *) immr_map(im_cpm);
-
-	if (bcsr_io == NULL) {
+	if (!bcsr || !bcsr5) {
 		printk(KERN_CRIT "Could not remap BCSR\n");
 		return;
 	}
 
-	/* Enable the PHY.
-	 */
-	clrbits32(bcsr_io + 4, BCSR4_ETH10_RST);
-	udelay(1000);
-	setbits32(bcsr_io + 4, BCSR4_ETH10_RST);
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits32(&bcsr[1], BCSR1_RS232EN_1);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	setbits32(&bcsr[1], BCSR1_RS232EN_2);
+#else
+	clrbits32(&bcsr[1], BCSR1_RS232EN_2);
+#endif
 
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
-	clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
-	setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+	clrbits32(bcsr5, BCSR5_MII1_EN);
+	setbits32(bcsr5, BCSR5_MII1_RST);
+	udelay(1000);
+	clrbits32(bcsr5, BCSR5_MII1_RST);
 
-	/* Configure port E for TCLK and RCLK.
-	 */
-	setbits32(&cp->cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
-	clrbits32(&cp->cp_pepar, PE_ENET_TENA);
-	clrbits32(&cp->cp_pedir, PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
-	clrbits32(&cp->cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
-	setbits32(&cp->cp_peso, PE_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
-	setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	clrbits32(bcsr5, BCSR5_MII2_EN);
+	setbits32(bcsr5, BCSR5_MII2_RST);
+	udelay(1000);
+	clrbits32(bcsr5, BCSR5_MII2_RST);
+#else
+	setbits32(bcsr5, BCSR5_MII2_EN);
+#endif
 
-	/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
-	 */
-	clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
-	/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
-	 * by H/W setting after reset. SCC ethernet controller support only half duplex.
-	 * This discrepancy of modes causes a lot of carrier lost errors.
-	 */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+	clrbits32(&bcsr[4], BCSR4_ETH10_RST);
+	udelay(1000);
+	setbits32(&bcsr[4], BCSR4_ETH10_RST);
 
-	/* In the original SCC enet driver the following code is placed at
-	   the end of the initialization */
-	setbits32(&cp->cp_pepar, PE_ENET_TENA);
-	clrbits32(&cp->cp_pedir, PE_ENET_TENA);
-	setbits32(&cp->cp_peso, PE_ENET_TENA);
+	setbits32(&bcsr[1], BCSR1_ETHEN);
 
-	setbits32(bcsr_io + 4, BCSR1_ETHEN);
-	iounmap(bcsr_io);
-	immr_unmap(io_port);
-	immr_unmap(cp);
-}
+	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
+#else
+	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
+#endif
 
-void init_scc_ioports(struct fs_platform_info *fpi)
-{
-	int scc_no = fs_get_scc_index(fpi->fs_no);
+	/* The SCC3 enet registers overlap the SMC1 registers, so
+	 * one of the two must be removed from the device tree.
+	 */
 
-	switch (scc_no) {
-	case 2:
-		init_scc3_ioports(fpi);
-		break;
-	default:
-		printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
-		return;
+	if (np) {
+		of_detach_node(np);
+		of_node_put(np);
 	}
-}
-
-static void init_smc1_uart_ioports(struct fs_uart_platform_info *ptr)
-{
-	unsigned *bcsr_io;
-	cpm8xx_t *cp;
-
-	cp = (cpm8xx_t *) immr_map(im_cpm);
-	setbits32(&cp->cp_pepar, 0x000000c0);
-	clrbits32(&cp->cp_pedir, 0x000000c0);
-	clrbits32(&cp->cp_peso, 0x00000040);
-	setbits32(&cp->cp_peso, 0x00000080);
-	immr_unmap(cp);
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
 
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-	clrbits32(bcsr_io, BCSR1_RS232EN_1);
-	iounmap(bcsr_io);
+#ifdef CONFIG_PCMCIA_M8XX
+	/* Set up board specific hook-ups.*/
+	m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+	m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
 }
 
-static void init_smc2_uart_ioports(struct fs_uart_platform_info *fpi)
+static int __init mpc885ads_probe(void)
 {
-	unsigned *bcsr_io;
-	cpm8xx_t *cp;
-
-	cp = (cpm8xx_t *) immr_map(im_cpm);
-	setbits32(&cp->cp_pepar, 0x00000c00);
-	clrbits32(&cp->cp_pedir, 0x00000c00);
-	clrbits32(&cp->cp_peso, 0x00000400);
-	setbits32(&cp->cp_peso, 0x00000800);
-	immr_unmap(cp);
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-	clrbits32(bcsr_io, BCSR1_RS232EN_2);
-	iounmap(bcsr_io);
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
 }
 
-void init_smc_ioports(struct fs_uart_platform_info *data)
-{
-	int smc_no = fs_uart_id_fsid2smc(data->fs_no);
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
 
-	switch (smc_no) {
-	case 0:
-		init_smc1_uart_ioports(data);
-		data->brg = data->clk_rx;
-		break;
-	case 1:
-		init_smc2_uart_ioports(data);
-		data->brg = data->clk_rx;
-		break;
-	default:
-		printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
-		return;
-	}
-}
-
-int platform_device_skip(const char *model, int id)
+static int __init declare_of_platform_devices(void)
 {
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
-	const char *dev = "FEC";
-	int n = 2;
-#else
-	const char *dev = "SCC";
-	int n = 3;
-#endif
-
-	if (!strcmp(model, dev) && n == id)
-		return 1;
+	/* Publish the QE devices */
+	if (machine_is(mpc885_ads))
+		of_platform_bus_probe(NULL, of_bus_ids, NULL);
 
 	return 0;
 }
-
-static void __init mpc885ads_setup_arch(void)
-{
-	cpm_reset();
-
-	mpc885ads_board_setup();
-
-	ROOT_DEV = Root_NFS;
-}
-
-static int __init mpc885ads_probe(void)
-{
-	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-					  "model", NULL);
-	if (model == NULL)
-		return 0;
-	if (strcmp(model, "MPC885ADS"))
-		return 0;
-
-	return 1;
-}
-
-define_machine(mpc885_ads)
-{
-.name = "MPC885 ADS",.probe = mpc885ads_probe,.setup_arch =
-	    mpc885ads_setup_arch,.init_IRQ =
-	    m8xx_pic_init,.get_irq =
-	    mpc8xx_get_irq,.restart = mpc8xx_restart,.calibrate_decr =
-	    mpc8xx_calibrate_decr,.set_rtc_time =
-	    mpc8xx_set_rtc_time,.get_rtc_time = mpc8xx_get_rtc_time,};
+device_initcall(declare_of_platform_devices);
+
+define_machine(mpc885_ads) {
+	.name			= "Freescale MPC885 ADS",
+	.probe			= mpc885ads_probe,
+	.setup_arch		= mpc885ads_setup_arch,
+	.init_IRQ		= m8xx_pic_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.set_rtc_time		= mpc8xx_set_rtc_time,
+	.get_rtc_time		= mpc8xx_get_rtc_time,
+	.progress		= udbg_progress,
+};
-- 
1.5.3.1

Re: [PATCH 18/28] 8xx: mpc885ads cleanup

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 386 bytes --]

On Mon, 17 Sep 2007 11:58:05 -0500 Scott Wood <scottwood@freescale.com> wrote:
>
> +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
>  #include <asm/fs_pd.h>
> -#include <asm/prom.h>
> +#include <asm/of_platform.h>

linux/of_platform.h

Sorry if I am getting boring.
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

[PATCH 19/28] 8xx: Embedded Planet EP88xC support

[Scott Wood]

This board is also resold by Freescale under the names
"QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE".

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/Makefile            |    4 +-
 arch/powerpc/boot/dts/ep88xc.dts      |  203 +++++++++
 arch/powerpc/boot/ep88xc.c            |   54 +++
 arch/powerpc/boot/fixed-head.S        |    4 +
 arch/powerpc/boot/wrapper             |   20 +-
 arch/powerpc/configs/ep88xc_defconfig |  751 +++++++++++++++++++++++++++++++++
 arch/powerpc/platforms/8xx/Kconfig    |   10 +
 arch/powerpc/platforms/8xx/Makefile   |    1 +
 arch/powerpc/platforms/8xx/ep88xc.c   |  176 ++++++++
 9 files changed, 1216 insertions(+), 7 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/ep88xc.dts
 create mode 100644 arch/powerpc/boot/ep88xc.c
 create mode 100644 arch/powerpc/boot/fixed-head.S
 create mode 100644 arch/powerpc/configs/ep88xc_defconfig
 create mode 100644 arch/powerpc/platforms/8xx/ep88xc.c

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 932492a..5e59db5 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -49,7 +49,8 @@ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
 src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
 		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
-		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c
+		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c fixed-head.S \
+		ep88xc.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -142,6 +143,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
 ifneq ($(CONFIG_DEVICE_TREE),"")
 image-$(CONFIG_PPC_8xx)			+= cuImage.8xx
+image-$(CONFIG_PPC_EP88XC)		+= zImage.ep88xc
 image-$(CONFIG_8260)			+= cuImage.pq2
 image-$(CONFIG_PPC_83xx)		+= cuImage.83xx
 image-$(CONFIG_PPC_85xx)		+= cuImage.85xx
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
new file mode 100644
index 0000000..0406fc5
--- /dev/null
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -0,0 +1,203 @@
+/*
+ * EP88xC Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "EP88xC";
+	compatible = "fsl,ep88xc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <d#16>;
+			i-cache-line-size = <d#16>;
+			d-cache-size = <d#8192>;
+			i-cache-size = <d#8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <f 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	localbus@fa200100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <fa200100 40>;
+
+		ranges = <
+			0 0 fc000000 04000000
+			3 0 fa000000 01000000
+		>;
+
+		flash@0,2000000 {
+			compatible = "cfi-flash";
+			reg = <0 2000000 2000000>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		board-control@3,400000 {
+			reg = <3 400000 10>;
+			compatible = "fsl,ep88xc-bcsr";
+		};
+	};
+
+	soc@fa200000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 fa200000 00004000>;
+		bus-frequency = <0>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <fa200000 4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <e00 188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <e00 188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <1e00 188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 24>;
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+		};
+
+		pcmcia@80 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <80 80>;
+			interrupt-parent = <&PIC>;
+			interrupts = <d 1>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+			command-proc = <9c0>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <9c0 40 2000 1c00>;
+			ranges;
+
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				reg = <9f0 10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <930 20>;
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			// MON-1
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <a80 10 3e80 40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0090>;
+				linux,planetcore-label = "SMC1";
+			};
+
+			// SER-1
+			serial@a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-scc-uart",
+				             "fsl,cpm1-scc-uart";
+				reg = <a20 20 3d00 80>;
+				interrupts = <1d>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0040>;
+				linux,planetcore-label = "SCC2";
+			};
+
+			usb@a00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc885-usb",
+				             "fsl,cpm1-usb";
+				reg = <a00 18 1c00 80>;
+				interrupt-parent = <&CPM_PIC>;
+				interrupts = <1e>;
+				fsl,cpm-command = <0000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/ep88xc.c b/arch/powerpc/boot/ep88xc.c
new file mode 100644
index 0000000..6b87cdc
--- /dev/null
+++ b/arch/powerpc/boot/ep88xc.c
@@ -0,0 +1,54 @@
+/*
+ * Embedded Planet EP88xC with PlanetCore firmware
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "planetcore.h"
+#include "mpc8xx.h"
+
+static char *table;
+static u64 mem_size;
+
+static void platform_fixups(void)
+{
+	u64 val;
+
+	dt_fixup_memory(0, mem_size);
+	planetcore_set_mac_addrs(table);
+
+	if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) {
+		printf("No PlanetCore crystal frequency key.\r\n");
+		return;
+	}
+
+	mpc885_fixup_clocks(val);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	table = (char *)r3;
+	planetcore_prepare_table(table);
+
+	if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size))
+		return;
+
+	mem_size *= 1024 * 1024;
+	simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64);
+
+	ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+
+	planetcore_set_stdout_path(table);
+
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/fixed-head.S b/arch/powerpc/boot/fixed-head.S
new file mode 100644
index 0000000..8e14cd9
--- /dev/null
+++ b/arch/powerpc/boot/fixed-head.S
@@ -0,0 +1,4 @@
+	.text
+	.global _zimage_start
+_zimage_start:
+	b	_zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 65f6854..39b27e5 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -29,6 +29,7 @@ initrd=
 dtb=
 dts=
 cacheit=
+binary=
 gzip=.gz
 
 # cross-compilation prefix
@@ -142,17 +143,23 @@ miboot|uboot)
     isection=initrd
     ;;
 cuboot*)
+    binary=y
     gzip=
     ;;
 ps3)
     platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
     lds=$object/zImage.ps3.lds
+    binary=y
     gzip=
     ext=bin
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     ;;
+ep88xc)
+    platformo="$object/fixed-head.o $object/$platform.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -224,6 +231,11 @@ fi
 base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
 entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
 
+if [ -n "$binary" ]; then
+    mv "$ofile" "$ofile".elf
+    ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+fi
+
 # post-processing needed for some platforms
 case "$platform" in
 pseries|chrp)
@@ -234,8 +246,6 @@ coff)
     $object/hack-coff "$ofile"
     ;;
 cuboot*)
-    mv "$ofile" "$ofile".elf
-    ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
     gzip -f -9 "$ofile".bin
     mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".bin.gz "$ofile"
@@ -259,11 +269,11 @@ ps3)
     # then copied to offset 0x100.  At runtime the bootwrapper program
     # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
 
-    system_reset_overlay=0x`${CROSS}nm "$ofile" \
+    system_reset_overlay=0x`${CROSS}nm "$ofile".elf \
         | grep ' __system_reset_overlay$'       \
         | cut -d' ' -f1`
     system_reset_overlay=`printf "%d" $system_reset_overlay`
-    system_reset_kernel=0x`${CROSS}nm "$ofile" \
+    system_reset_kernel=0x`${CROSS}nm "$ofile".elf \
         | grep ' __system_reset_kernel$'       \
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
@@ -272,8 +282,6 @@ ps3)
 
     rm -f "$object/otheros.bld"
 
-    ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
-
     msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
         skip=$overlay_dest seek=$system_reset_kernel      \
         count=$overlay_size bs=1 2>&1)
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
new file mode 100644
index 0000000..d8ee3c0
--- /dev/null
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -0,0 +1,751 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6
+# Fri Sep 14 14:59:56 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+CONFIG_PPC_8xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_8xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_CPM1=y
+# CONFIG_MPC8XXFADS is not set
+# CONFIG_MPC86XADS is not set
+# CONFIG_MPC885ADS is not set
+CONFIG_PPC_EP88XC=y
+
+#
+# MPC8xx CPM Options
+#
+
+#
+# Generic MPC8xx Options
+#
+CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_CPU6 is not set
+CONFIG_8xx_CPU15=y
+CONFIG_NO_UCODE_PATCH=y
+# CONFIG_USB_SOF_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_UCODE_PATCH is not set
+# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="ep88xc.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PCI_QSPAN is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xfd000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_CFI_FLAGADM is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 0d4ff0a..bd28655 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -33,6 +33,16 @@ config MPC885ADS
 	  The MPC885ADS is meant to serve as a platform for s/w and h/w
 	  development around the MPC885 processor family.
 
+config PPC_EP88XC
+	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
+	select CPM1
+	select PPC_CPM_NEW_BINDING
+	help
+	  This enables support for the Embedded Planet EP88xC board.
+
+	  This board is also resold by Freescale as the QUICCStart
+	  MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 5e2dae3..8b70980 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -4,3 +4,4 @@
 obj-$(CONFIG_PPC_8xx)	  += m8xx_setup.o
 obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
 obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
+obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c
new file mode 100644
index 0000000..c518b6c
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/ep88xc.c
@@ -0,0 +1,176 @@
+/*
+ * Platform setup for the Embedded Planet EP88xC board
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/commproc.h>
+
+#include <sysdev/commproc.h>
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin ep88xc_pins[] = {
+	/* SMC1 */
+	{1, 24, CPM_PIN_INPUT}, /* RX */
+	{1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC2 */
+	{0, 12, CPM_PIN_INPUT}, /* TX */
+	{0, 13, CPM_PIN_INPUT}, /* RX */
+	{2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */
+	{2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */
+	{2, 14, CPM_PIN_INPUT}, /* RTS */
+
+	/* MII1 */
+	{0, 0, CPM_PIN_INPUT},
+	{0, 1, CPM_PIN_INPUT},
+	{0, 2, CPM_PIN_INPUT},
+	{0, 3, CPM_PIN_INPUT},
+	{0, 4, CPM_PIN_OUTPUT},
+	{0, 10, CPM_PIN_OUTPUT},
+	{0, 11, CPM_PIN_OUTPUT},
+	{1, 19, CPM_PIN_INPUT},
+	{1, 31, CPM_PIN_INPUT},
+	{2, 12, CPM_PIN_INPUT},
+	{2, 13, CPM_PIN_INPUT},
+	{3, 8, CPM_PIN_INPUT},
+	{4, 30, CPM_PIN_OUTPUT},
+	{4, 31, CPM_PIN_OUTPUT},
+
+	/* MII2 */
+	{4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 16, CPM_PIN_OUTPUT},
+	{4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 21, CPM_PIN_OUTPUT},
+	{4, 22, CPM_PIN_OUTPUT},
+	{4, 23, CPM_PIN_OUTPUT},
+	{4, 24, CPM_PIN_OUTPUT},
+	{4, 25, CPM_PIN_OUTPUT},
+	{4, 26, CPM_PIN_OUTPUT},
+	{4, 27, CPM_PIN_OUTPUT},
+	{4, 28, CPM_PIN_OUTPUT},
+	{4, 29, CPM_PIN_OUTPUT},
+
+	/* USB */
+	{0, 6, CPM_PIN_INPUT},  /* CLK2 */
+	{0, 14, CPM_PIN_INPUT}, /* USBOE */
+	{0, 15, CPM_PIN_INPUT}, /* USBRXD */
+	{2, 6, CPM_PIN_OUTPUT}, /* USBTXN */
+	{2, 7, CPM_PIN_OUTPUT}, /* USBTXP */
+	{2, 10, CPM_PIN_INPUT}, /* USBRXN */
+	{2, 11, CPM_PIN_INPUT}, /* USBRXP */
+
+	/* Misc */
+	{1, 26, CPM_PIN_INPUT}, /* BRGO2 */
+	{1, 27, CPM_PIN_INPUT}, /* BRGO1 */
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) {
+		struct cpm_pin *pin = &ep88xc_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
+	cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+}
+
+static u8 __iomem *ep88xc_bcsr;
+
+#define BCSR7_SCC2_ENABLE 0x10
+
+#define BCSR8_PHY1_ENABLE 0x80
+#define BCSR8_PHY1_POWER  0x40
+#define BCSR8_PHY2_ENABLE 0x20
+#define BCSR8_PHY2_POWER  0x10
+
+#define BCSR9_USB_ENABLE  0x80
+#define BCSR9_USB_POWER   0x40
+#define BCSR9_USB_HOST    0x20
+#define BCSR9_USB_FULL_SPEED_TARGET 0x10
+
+static void __init ep88xc_setup_arch(void)
+{
+	struct device_node *np;
+
+	cpm_reset();
+	init_ioports();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr");
+	if (!np) {
+		printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n");
+		return;
+	}
+
+	ep88xc_bcsr = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!ep88xc_bcsr) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+
+	setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE);
+	setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
+	                          BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
+}
+
+static int __init ep88xc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "fsl,ep88xc");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	if (machine_is(ep88xc))
+		of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+device_initcall(declare_of_platform_devices);
+
+define_machine(ep88xc) {
+	.name = "Embedded Planet EP88xC",
+	.probe = ep88xc_probe,
+	.setup_arch = ep88xc_setup_arch,
+	.init_IRQ = m8xx_pic_init,
+	.get_irq	= mpc8xx_get_irq,
+	.restart = mpc8xx_restart,
+	.calibrate_decr = mpc8xx_calibrate_decr,
+	.set_rtc_time = mpc8xx_set_rtc_time,
+	.get_rtc_time = mpc8xx_get_rtc_time,
+	.progress = udbg_progress,
+};
-- 
1.5.3.1

[PATCH 20/28] cpm2: Infrastructure code cleanup.

[Scott Wood]

Mostly sparse fixes (__iomem annotations, etc); also, cpm2_immr
is used rather than creating many temporary mappings.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/cpm2_common.c |   52 ++++++++++++++++++++++++++----------
 arch/powerpc/sysdev/cpm2_pic.c    |    2 +-
 include/asm-powerpc/cpm2.h        |    2 +-
 include/asm-powerpc/fs_pd.h       |   19 ++-----------
 include/asm-powerpc/immap_cpm2.h  |    4 ++-
 5 files changed, 45 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index 3bf89b3..b4d8bd2 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -33,6 +33,8 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/of.h>
+
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mpc8260.h>
@@ -45,13 +47,12 @@
 #include <sysdev/fsl_soc.h>
 
 static void cpm2_dpinit(void);
-cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
 
 /* We allocate this here because it is used almost exclusively for
  * the communication processor devices.
  */
-cpm2_map_t *cpm2_immr;
-intctl_cpm2_t *cpm2_intctl;
+cpm2_map_t __iomem *cpm2_immr;
 
 #define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
 					   of space for CPM as it is larger
@@ -60,8 +61,7 @@ intctl_cpm2_t *cpm2_intctl;
 void
 cpm2_reset(void)
 {
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-	cpm2_intctl = cpm2_map(im_intctl);
+	cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
 
 	/* Reclaim the DP memory for our use.
 	 */
@@ -91,7 +91,7 @@ cpm2_reset(void)
 void
 cpm_setbrg(uint brg, uint rate)
 {
-	volatile uint	*bp;
+	u32 __iomem *bp;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -113,7 +113,8 @@ cpm_setbrg(uint brg, uint rate)
 void
 cpm2_fastbrg(uint brg, uint rate, int div16)
 {
-	volatile uint	*bp;
+	u32 __iomem *bp;
+	u32 val;
 
 	if (brg < 4) {
 		bp = cpm2_map_size(im_brgc1, 16);
@@ -123,10 +124,11 @@ cpm2_fastbrg(uint brg, uint rate, int div16)
 		brg -= 4;
 	}
 	bp += brg;
-	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
 	if (div16)
-		*bp |= CPM_BRG_DIV16;
+		val |= CPM_BRG_DIV16;
 
+	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
 
@@ -135,8 +137,8 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	int ret = 0;
 	int shift;
 	int i, bits = 0;
-	cpmux_t *im_cpmux;
-	u32 *reg;
+	cpmux_t __iomem *im_cpmux;
+	u32 __iomem *reg;
 	u32 mask = 7;
 	u8 clk_map [24][3] = {
 		{CPM_CLK_FCC1, CPM_BRG5, 0},
@@ -228,13 +230,33 @@ static spinlock_t cpm_dpmem_lock;
  * until the memory subsystem goes up... */
 static rh_block_t cpm_boot_dpmem_rh_block[16];
 static rh_info_t cpm_dpmem_info;
-static u8* im_dprambase;
+static u8 __iomem *im_dprambase;
 
 static void cpm2_dpinit(void)
 {
-	spin_lock_init(&cpm_dpmem_lock);
+	struct resource r;
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2");
+	if (!np)
+		panic("Cannot find CPM2 node");
 
-	im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+	if (of_address_to_resource(np, 1, &r))
+		panic("Cannot get CPM2 resource 1");
+
+	of_node_put(np);
+#else
+	r.start = CPM_MAP_ADDR + CPM_DATAONLY_BASE;
+	r.end = r.start + CPM_DATAONLY_SIZE - 1;
+#endif
+
+	im_dprambase = ioremap(r.start, r.end - r.start + 1);
+	if (!im_dprambase)
+		panic("Cannot map DPRAM");
+
+	spin_lock_init(&cpm_dpmem_lock);
 
 	/* initialize the info header */
 	rh_init(&cpm_dpmem_info, 1,
@@ -248,7 +270,7 @@ static void cpm2_dpinit(void)
 	 * varies with the processor and the microcode patches activated.
 	 * But the following should be at least safe.
 	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+	rh_attach_region(&cpm_dpmem_info, 0, r.end - r.start + 1);
 }
 
 /* This function returns an index into the DPRAM area.
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index d5b36e0..5fe65b2 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -48,7 +48,7 @@
 #define CPM2_IRQ_PORTC15	48
 #define CPM2_IRQ_PORTC0		63
 
-static intctl_cpm2_t *cpm2_intctl;
+static intctl_cpm2_t __iomem *cpm2_intctl;
 
 static struct irq_host *cpm2_pic_host;
 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 12a2860..c036506 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -107,7 +107,7 @@
 /* Export the base address of the communication processor registers
  * and dual port ram.
  */
-extern		cpm_cpm2_t	*cpmp;	 /* Pointer to comm processor */
+extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 
 extern unsigned long cpm_dpalloc(uint size, uint align);
 extern int cpm_dpfree(unsigned long offset);
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
index 77e04d0..64706a0 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/include/asm-powerpc/fs_pd.h
@@ -23,22 +23,9 @@
 #include <asm/mpc85xx.h>
 #endif
 
-#define cpm2_map(member)						\
-({									\
-	u32 offset = offsetof(cpm2_map_t, member);			\
-	void *addr = ioremap (CPM_MAP_ADDR + offset,			\
-			      sizeof( ((cpm2_map_t*)0)->member));	\
-	addr;								\
-})
-
-#define cpm2_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(cpm2_map_t, member);			\
-	void *addr = ioremap (CPM_MAP_ADDR + offset, size);		\
-	addr;								\
-})
-
-#define cpm2_unmap(addr)	iounmap(addr)
+#define cpm2_map(member) (&cpm2_immr->member)
+#define cpm2_map_size(member, size) (&cpm2_immr->member)
+#define cpm2_unmap(addr) do {} while(0)
 #endif
 
 #ifdef CONFIG_8xx
diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h
index f316a91..4080bab 100644
--- a/include/asm-powerpc/immap_cpm2.h
+++ b/include/asm-powerpc/immap_cpm2.h
@@ -10,6 +10,8 @@
 #ifndef __IMMAP_CPM2__
 #define __IMMAP_CPM2__
 
+#include <linux/types.h>
+
 /* System configuration registers.
 */
 typedef	struct sys_82xx_conf {
@@ -642,7 +644,7 @@ typedef struct immap {
 	u8		res11[4096];
 } cpm2_map_t;
 
-extern cpm2_map_t	*cpm2_immr;
+extern cpm2_map_t __iomem *cpm2_immr;
 
 #endif /* __IMMAP_CPM2__ */
 #endif /* __KERNEL__ */
-- 
1.5.3.1

[PATCH 21/28] cpm2: Add SCCs to cpm2_clk_setup(), and cpm2_smc_clk_setup().

[Scott Wood]

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/cpm2_common.c |  100 +++++++++++++++++++++++++++++++++++--
 include/asm-powerpc/cpm2.h        |    5 ++-
 2 files changed, 99 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index b4d8bd2..9f6ef65 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -140,7 +140,8 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	cpmux_t __iomem *im_cpmux;
 	u32 __iomem *reg;
 	u32 mask = 7;
-	u8 clk_map [24][3] = {
+
+	u8 clk_map[][3] = {
 		{CPM_CLK_FCC1, CPM_BRG5, 0},
 		{CPM_CLK_FCC1, CPM_BRG6, 1},
 		{CPM_CLK_FCC1, CPM_BRG7, 2},
@@ -164,8 +165,40 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 		{CPM_CLK_FCC3, CPM_CLK13, 4},
 		{CPM_CLK_FCC3, CPM_CLK14, 5},
 		{CPM_CLK_FCC3, CPM_CLK15, 6},
-		{CPM_CLK_FCC3, CPM_CLK16, 7}
-		};
+		{CPM_CLK_FCC3, CPM_CLK16, 7},
+		{CPM_CLK_SCC1, CPM_BRG1, 0},
+		{CPM_CLK_SCC1, CPM_BRG2, 1},
+		{CPM_CLK_SCC1, CPM_BRG3, 2},
+		{CPM_CLK_SCC1, CPM_BRG4, 3},
+		{CPM_CLK_SCC1, CPM_CLK11, 4},
+		{CPM_CLK_SCC1, CPM_CLK12, 5},
+		{CPM_CLK_SCC1, CPM_CLK3, 6},
+		{CPM_CLK_SCC1, CPM_CLK4, 7},
+		{CPM_CLK_SCC2, CPM_BRG1, 0},
+		{CPM_CLK_SCC2, CPM_BRG2, 1},
+		{CPM_CLK_SCC2, CPM_BRG3, 2},
+		{CPM_CLK_SCC2, CPM_BRG4, 3},
+		{CPM_CLK_SCC2, CPM_CLK11, 4},
+		{CPM_CLK_SCC2, CPM_CLK12, 5},
+		{CPM_CLK_SCC2, CPM_CLK3, 6},
+		{CPM_CLK_SCC2, CPM_CLK4, 7},
+		{CPM_CLK_SCC3, CPM_BRG1, 0},
+		{CPM_CLK_SCC3, CPM_BRG2, 1},
+		{CPM_CLK_SCC3, CPM_BRG3, 2},
+		{CPM_CLK_SCC3, CPM_BRG4, 3},
+		{CPM_CLK_SCC3, CPM_CLK5, 4},
+		{CPM_CLK_SCC3, CPM_CLK6, 5},
+		{CPM_CLK_SCC3, CPM_CLK7, 6},
+		{CPM_CLK_SCC3, CPM_CLK8, 7},
+		{CPM_CLK_SCC4, CPM_BRG1, 0},
+		{CPM_CLK_SCC4, CPM_BRG2, 1},
+		{CPM_CLK_SCC4, CPM_BRG3, 2},
+		{CPM_CLK_SCC4, CPM_BRG4, 3},
+		{CPM_CLK_SCC4, CPM_CLK5, 4},
+		{CPM_CLK_SCC4, CPM_CLK6, 5},
+		{CPM_CLK_SCC4, CPM_CLK7, 6},
+		{CPM_CLK_SCC4, CPM_CLK8, 7},
+	};
 
 	im_cpmux = cpm2_map(im_cpmux);
 
@@ -205,23 +238,80 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	if (mode == CPM_CLK_RX)
 		shift += 3;
 
-	for (i=0; i<24; i++) {
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
 		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
 			bits = clk_map[i][2];
 			break;
 		}
 	}
-	if (i == sizeof(clk_map)/3)
+	if (i == ARRAY_SIZE(clk_map))
 	    ret = -EINVAL;
 
 	bits <<= shift;
 	mask <<= shift;
+
 	out_be32(reg, (in_be32(reg) & ~mask) | bits);
 
 	cpm2_unmap(im_cpmux);
 	return ret;
 }
 
+int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	cpmux_t __iomem *im_cpmux;
+	u8 __iomem *reg;
+	u8 mask = 3;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_SMC1, CPM_BRG1, 0},
+		{CPM_CLK_SMC1, CPM_BRG7, 1},
+		{CPM_CLK_SMC1, CPM_CLK7, 2},
+		{CPM_CLK_SMC1, CPM_CLK9, 3},
+		{CPM_CLK_SMC2, CPM_BRG2, 0},
+		{CPM_CLK_SMC2, CPM_BRG8, 1},
+		{CPM_CLK_SMC2, CPM_CLK4, 2},
+		{CPM_CLK_SMC2, CPM_CLK15, 3},
+	};
+
+	im_cpmux = cpm2_map(im_cpmux);
+
+	switch (target) {
+	case CPM_CLK_SMC1:
+		reg = &im_cpmux->cmx_smr;
+		mask = 3;
+		shift = 4;
+		break;
+	case CPM_CLK_SMC2:
+		reg = &im_cpmux->cmx_smr;
+		mask = 3;
+		shift = 0;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(clk_map))
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+
+	out_8(reg, (in_8(reg) & ~mask) | bits);
+
+	cpm2_unmap(im_cpmux);
+	return ret;
+}
+
 /*
  * dpalloc / dpfree bits.
  */
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index c036506..41a45db 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -1206,7 +1206,9 @@ enum cpm_clk_target {
 	CPM_CLK_SCC4,
 	CPM_CLK_FCC1,
 	CPM_CLK_FCC2,
-	CPM_CLK_FCC3
+	CPM_CLK_FCC3,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
 };
 
 enum cpm_clk {
@@ -1243,6 +1245,7 @@ enum cpm_clk {
 };
 
 extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
+extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
 
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */
-- 
1.5.3.1

[PATCH 22/28] cpm2: Add cpm2_set_pin().

[Scott Wood]

This provides a generic way for board code to set up CPM pins, rather
than directly poking magic values into registers.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/cpm2_common.c |   33 +++++++++++++++++++++++++++++++++
 include/asm-powerpc/cpm2.h        |    9 +++++++++
 2 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index 9f6ef65..9058da2 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -418,3 +418,36 @@ void *cpm_dpram_addr(unsigned long offset)
 	return (void *)(im_dprambase + offset);
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+void cpm2_set_pin(int port, int pin, int flags)
+{
+	struct cpm2_ioports __iomem *iop =
+		(struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
+
+	pin = 1 << (31 - pin);
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop[port].dir, pin);
+	else
+		clrbits32(&iop[port].dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop[port].par, pin);
+	else
+		clrbits32(&iop[port].par, pin);
+
+	if (flags & CPM_PIN_SECONDARY)
+		setbits32(&iop[port].sor, pin);
+	else
+		clrbits32(&iop[port].sor, pin);
+
+	if (flags & CPM_PIN_OPENDRAIN)
+		setbits32(&iop[port].odr, pin);
+	else
+		clrbits32(&iop[port].odr, pin);
+}
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 41a45db..d7b57ac 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -1247,5 +1247,14 @@ enum cpm_clk {
 extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
 extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
 
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */
-- 
1.5.3.1

[PATCH 23/28] mpc82xx: Define CPU_FTR_NEED_COHERENT

[Scott Wood]

The 8272 (and presumably other PCI PQ2 chips) appear to have the
same issue as the 83xx regarding PCI streaming DMA.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 include/asm-powerpc/cputable.h |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index f62cffd..c9b8f64 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -196,12 +196,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
 #endif
 
-/* We need to mark all pages as being coherent if we're SMP or we
- * have a 74[45]x and an MPC107 host bridge. Also 83xx requires
- * it for PCI "streaming/prefetch" to work properly.
+/* We need to mark all pages as being coherent if we're SMP or we have a
+ * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+ * require it for PCI "streaming/prefetch" to work properly.
  */
 #if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
-	|| defined(CONFIG_PPC_83xx)
+	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
 #define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
 #else
 #define CPU_FTR_COMMON                  0
@@ -313,7 +313,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 	    CPU_FTR_PPC_LE)
 #define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
 	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
-#define CPU_FTRS_G2_LE	(CPU_FTR_MAYBE_CAN_DOZE | \
+#define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
 	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
 #define CPU_FTRS_E300	(CPU_FTR_MAYBE_CAN_DOZE | \
 	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
-- 
1.5.3.1

RE: [PATCH 23/28] mpc82xx: Define CPU_FTR_NEED_COHERENT

[Rune Torgersen]

> -----Original Message-----
> From: Scott Wood
> Sent: Monday, September 17, 2007 11:58 AM
>=20
> The 8272 (and presumably other PCI PQ2 chips) appear to have the
> same issue as the 83xx regarding PCI streaming DMA.
>=20

Can you explain what this isssue is? We're using a 8280 and have had
some PCI busmaster DMA problems, and wonder if it is related.

Re: [PATCH 23/28] mpc82xx: Define CPU_FTR_NEED_COHERENT

[Scott Wood]

On Tue, Sep 18, 2007 at 09:34:31AM -0500, Rune Torgersen wrote:
> > -----Original Message-----
> > From: Scott Wood
> > Sent: Monday, September 17, 2007 11:58 AM
> > 
> > The 8272 (and presumably other PCI PQ2 chips) appear to have the
> > same issue as the 83xx regarding PCI streaming DMA.
> > 
> 
> Can you explain what this isssue is? We're using a 8280 and have had
> some PCI busmaster DMA problems, and wonder if it is related.

I'm not sure of the details, just that I get corrupted PCI DMA if I don't
set it.

BTW, if the problems you're seeing include lockups when using PCI DMA,
check out the end of the PCI initialization in
arch/powerpc/boot/cuboot-pq2.c; it requires certain non-default arbiter
settings.

-Scott

[PATCH 24/28] mpc82xx: Remove a bunch of cruft that duplicates generic functionality.

[Scott Wood]

m82xx_calibrate_decr(), mpc82xx_ads_show_cpuinfo(), and mpc82xx_halt() do
anything useful beyond what the generic code does.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/82xx/Makefile      |    1 -
 arch/powerpc/platforms/82xx/mpc82xx.c     |  109 -----------------------------
 arch/powerpc/platforms/82xx/mpc82xx_ads.c |   10 +--
 arch/powerpc/platforms/82xx/pq2ads.h      |    6 --
 4 files changed, 2 insertions(+), 124 deletions(-)
 delete mode 100644 arch/powerpc/platforms/82xx/mpc82xx.c

diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index d9fd4c8..534c353 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -1,5 +1,4 @@
 #
 # Makefile for the PowerPC 82xx linux kernel.
 #
-obj-$(CONFIG_PPC_82xx) += mpc82xx.o
 obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
deleted file mode 100644
index c706871..0000000
--- a/arch/powerpc/platforms/82xx/mpc82xx.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * MPC82xx setup and early boot code plus other random bits.
- *
- * Author: Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright (c) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_uart_pd.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/cpm2.h>
-#include <asm/udbg.h>
-#include <asm/i8259.h>
-#include <linux/fs_enet_pd.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/cpm2_pic.h>
-
-#include "pq2ads.h"
-
-static int __init get_freq(char *name, unsigned long *val)
-{
-	struct device_node *cpu;
-	const unsigned int *fp;
-	int found = 0;
-
-	/* The cpu node should have timebase and clock frequency properties */
-	cpu = of_find_node_by_type(NULL, "cpu");
-
-	if (cpu) {
-		fp = of_get_property(cpu, name, NULL);
-		if (fp) {
-			found = 1;
-			*val = *fp;
-		}
-
-		of_node_put(cpu);
-	}
-
-	return found;
-}
-
-void __init m82xx_calibrate_decr(void)
-{
-	ppc_tb_freq = 125000000;
-	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
-				"(not found)\n");
-	}
-	ppc_tb_freq /= 4;
-	ppc_proc_freq = 1000000000;
-	if (!get_freq("clock-frequency", &ppc_proc_freq))
-		printk(KERN_ERR "WARNING: Estimating processor frequency"
-				"(not found)\n");
-}
-
-void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-}
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index 4008795..b251a55 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -612,12 +612,6 @@ static void m82xx_restart(char *cmd)
 	while (1) ;
 }
 
-static void m82xx_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
 define_machine(mpc82xx_ads)
 {
 	.name = "MPC82xx ADS",
@@ -626,6 +620,6 @@ define_machine(mpc82xx_ads)
 	.init_IRQ =    mpc82xx_ads_pic_init,
 	.show_cpuinfo =    mpc82xx_ads_show_cpuinfo,
 	.get_irq =    cpm2_get_irq,
-	.calibrate_decr =    m82xx_calibrate_decr,
-	.restart = m82xx_restart,.halt = m82xx_halt,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = m82xx_restart,
 };
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index 6f749b7..8b67048 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -24,10 +24,6 @@
 
 #include <linux/seq_file.h>
 
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Freescale Semiconductor"
-#define CPUINFO_MACHINE		"PQ2 ADS PowerPC"
-
 /* Backword-compatibility stuff for the drivers */
 #define CPM_MAP_ADDR		((uint)0xf0000000)
 #define CPM_IRQ_OFFSET 0
@@ -58,8 +54,6 @@
 #define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
 
 void m82xx_pci_init_irq(void);
-void mpc82xx_ads_show_cpuinfo(struct seq_file*);
-void m82xx_calibrate_decr(void);
 
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */
-- 
1.5.3.1

Re: [PATCH 24/28] mpc82xx: Remove a bunch of cruft that duplicates generic functionality.

[David Gibson]

On Mon, Sep 17, 2007 at 11:58:16AM -0500, Scott Wood wrote:
> m82xx_calibrate_decr(), mpc82xx_ads_show_cpuinfo(), and mpc82xx_halt() do
> anything useful beyond what the generic code does.
> 
> Signed-off-by: Scott Wood <scottwood@freescale.com>

Acked-by: David Gibson <david@gibson.dropbear.id.au>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[PATCH 25/28] mpc82xx: Rename mpc82xx_ads to mpc8272_ads.

[Scott Wood]

This is just a rename patch; internal references to mpc82xx_ads will be
changed in the next one.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/82xx/Kconfig                |    8 ++++----
 arch/powerpc/platforms/82xx/Makefile               |    2 +-
 .../82xx/{mpc82xx_ads.c => mpc8272_ads.c}          |    0 
 3 files changed, 5 insertions(+), 5 deletions(-)
 rename arch/powerpc/platforms/82xx/{mpc82xx_ads.c => mpc8272_ads.c} (100%)

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 89fde43..f260c01 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,17 +1,17 @@
 choice
 	prompt "82xx Board Type"
 	depends on PPC_82xx
-	default MPC82xx_ADS
+	default MPC8272_ADS
 
-config MPC82xx_ADS
-	bool "Freescale MPC82xx ADS"
+config MPC8272_ADS
+	bool "Freescale MPC8272 ADS"
 	select DEFAULT_UIMAGE
 	select PQ2ADS
 	select 8272
 	select 8260
 	select FSL_SOC
 	help
-	This option enables support for the MPC8272 ADS board
+	  This option enables support for the MPC8272 ADS board
 
 endchoice
 
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index 534c353..9b7c851 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -1,4 +1,4 @@
 #
 # Makefile for the PowerPC 82xx linux kernel.
 #
-obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o
+obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
similarity index 100%
rename from arch/powerpc/platforms/82xx/mpc82xx_ads.c
rename to arch/powerpc/platforms/82xx/mpc8272_ads.c
-- 
1.5.3.1

[PATCH 26/28] mpc8272ads: Change references from 82xx_ADS to 8272_ADS.

[Scott Wood]

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/82xx/mpc8272_ads.c |   26 +++++++++++++-------------
 1 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index b251a55..97d8dc4 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -1,5 +1,5 @@
 /*
- * MPC82xx_ads setup and early boot code plus other random bits.
+ * MPC8272_ads setup and early boot code plus other random bits.
  *
  * Author: Vitaly Bordug <vbordug@ru.mvista.com>
  * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
@@ -63,7 +63,7 @@ static unsigned long pci_int_base;
 static struct irq_host *pci_pic_host;
 #endif
 
-static void __init mpc82xx_ads_pic_init(void)
+static void __init mpc8272_ads_pic_init(void)
 {
 	struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
 	struct resource r;
@@ -553,14 +553,14 @@ static void __init mpc82xx_add_bridge(struct device_node *np)
 /*
  * Setup the architecture
  */
-static void __init mpc82xx_ads_setup_arch(void)
+static void __init mpc8272_ads_setup_arch(void)
 {
 #ifdef CONFIG_PCI
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
-		ppc_md.progress("mpc82xx_ads_setup_arch()", 0);
+		ppc_md.progress("mpc8272_ads_setup_arch()", 0);
 	cpm2_reset();
 
 	/* Map I/O region to a 256MB BAT */
@@ -582,13 +582,13 @@ static void __init mpc82xx_ads_setup_arch(void)
 #endif
 
 	if (ppc_md.progress)
-		ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0);
+		ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0);
 }
 
 /*
  * Called very early, device-tree isn't unflattened
  */
-static int __init mpc82xx_ads_probe(void)
+static int __init mpc8272_ads_probe(void)
 {
 	/* We always match for now, eventually we should look at
 	 * the flat dev tree to ensure this is the board we are
@@ -612,14 +612,14 @@ static void m82xx_restart(char *cmd)
 	while (1) ;
 }
 
-define_machine(mpc82xx_ads)
+define_machine(mpc8272_ads)
 {
-	.name = "MPC82xx ADS",
-	.probe = mpc82xx_ads_probe,
-	.setup_arch =    mpc82xx_ads_setup_arch,
-	.init_IRQ =    mpc82xx_ads_pic_init,
-	.show_cpuinfo =    mpc82xx_ads_show_cpuinfo,
-	.get_irq =    cpm2_get_irq,
+	.name = "MPC8272 ADS",
+	.probe = mpc8272_ads_probe,
+	.setup_arch = mpc8272_ads_setup_arch,
+	.init_IRQ = mpc8272_ads_pic_init,
+	.show_cpuinfo = mpc8272_ads_show_cpuinfo,
+	.get_irq = cpm2_get_irq,
 	.calibrate_decr = generic_calibrate_decr,
 	.restart = m82xx_restart,
 };
-- 
1.5.3.1

[PATCH 27/28] mpc82xx: Update mpc8272ads, and factor out PCI and reset.

[Scott Wood]

1. PCI and reset are factored out into pq2.c.  I renamed them from m82xx
to pq2 because they won't work on the Integrated Host Processor line of
82xx chips (i.e. 8240, 8245, and such).

2. The PCI PIC, which is nominally board-specific, is used on multiple
boards, and thus is used into pq2ads-pci-pic.c.

3. The new CPM binding is used.

4. General cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Kconfig                         |    2 +-
 arch/powerpc/boot/dts/mpc8272ads.dts         |  309 +++++++------
 arch/powerpc/configs/mpc8272_ads_defconfig   |  248 +++++++----
 arch/powerpc/platforms/82xx/Kconfig          |    5 +
 arch/powerpc/platforms/82xx/Makefile         |    2 +
 arch/powerpc/platforms/82xx/mpc8272_ads.c    |  661 +++++---------------------
 arch/powerpc/platforms/82xx/pq2.c            |   82 ++++
 arch/powerpc/platforms/82xx/pq2.h            |   20 +
 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c |  195 ++++++++
 arch/powerpc/platforms/82xx/pq2ads.h         |    2 -
 10 files changed, 753 insertions(+), 773 deletions(-)
 create mode 100644 arch/powerpc/platforms/82xx/pq2.c
 create mode 100644 arch/powerpc/platforms/82xx/pq2.h
 create mode 100644 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2622f04..29d1248 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -466,7 +466,7 @@ config PCI_8260
 
 config 8260_PCI9
 	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260 && !ADS8272
+	depends on PCI_8260 && !8272
 	default y
 
 choice
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 4313054..3fe991d 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "MPC8272ADS";
-	compatible = "MPC8260ADS";
+	compatible = "fsl,mpc8272ads";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -22,187 +22,208 @@
 		PowerPC,8272@0 {
 			device_type = "cpu";
 			reg = <0>;
-			d-cache-line-size = <20>;       // 32 bytes
-			i-cache-line-size = <20>;       // 32 bytes
-			d-cache-size = <4000>;          // L1, 16K
-			i-cache-size = <4000>;          // L1, 16K
+			d-cache-line-size = <d#32>;
+			i-cache-line-size = <d#32>;
+			d-cache-size = <d#16384>;
+			i-cache-size = <d#16384>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 		};
 	};
 
-	pci_pic: interrupt-controller@f8200000 {
-		#address-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <f8200000 f8200004>;
-		device_type = "pci-pic";
-	};
-
 	memory {
 		device_type = "memory";
-		reg = <00000000 4000000 f4500000 00000020>;
-	};
-
-	chosen {
-		name = "chosen";
-		linux,platform = <0>;
-		interrupt-controller = <&Cpm_pic>;
+		reg = <0 0>;
 	};
 
-	soc8272@f0000000 {
-		#address-cells = <1>;
+	localbus@f0010100 {
+		compatible = "fsl,mpc8272-localbus",
+		             "fsl,pq2-localbus";
+		#address-cells = <2>;
 		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <00000000 f0000000 00053000>;
-		reg = <f0000000 10000>;
+		reg = <f0010100 40>;
 
-		mdio@0 {
-			device_type = "mdio";
-			compatible = "fs_enet";
-			reg = <0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy0:ethernet-phy@0 {
-				interrupt-parent = <&Cpm_pic>;
-				interrupts = <17 4>;
-				reg = <0>;
-				bitbang = [ 12 12 13 02 02 01 ];
-				device_type = "ethernet-phy";
-			};
+		ranges = <0 0 fe000000 02000000
+		          1 0 f4500000 00008000
+		          3 0 f8200000 00008000>;
 
-			phy1:ethernet-phy@1 {
-				interrupt-parent = <&Cpm_pic>;
-				interrupts = <17 4>;
-				bitbang = [ 12 12 13 02 02 01 ];
-				reg = <3>;
-				device_type = "ethernet-phy";
-			};
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0 0 2000000>;
+			bank-width = <4>;
+			device-width = <1>;
 		};
 
-		ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			device_type = "network";
-			device-id = <1>;
-			compatible = "fs_enet";
-			model = "FCC";
-			reg = <11300 20 8400 100 11380 30>;
-			mac-address = [ 00 11 2F 99 43 54 ];
-			interrupts = <20 2>;
-			interrupt-parent = <&Cpm_pic>;
-			phy-handle = <&Phy0>;
-			rx-clock = <13>;
-			tx-clock = <12>;
+		board-control@1,0 {
+			reg = <1 0 20>;
+			compatible = "fsl,mpc8272ads-bcsr";
 		};
 
-		ethernet@25000 {
-			device_type = "network";
-			device-id = <2>;
-			compatible = "fs_enet";
-			model = "FCC";
-			reg = <11320 20 8500 100 113b0 30>;
-			mac-address = [ 00 11 2F 99 44 54 ];
-			interrupts = <21 2>;
-			interrupt-parent = <&Cpm_pic>;
-			phy-handle = <&Phy1>;
-			rx-clock = <17>;
-			tx-clock = <18>;
+		PCI_PIC: interrupt-controller@3,0 {
+			compatible = "fsl,mpc8272ads-pci-pic",
+			             "fsl,pq2ads-pci-pic";
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <3 0 8>;
+			interrupt-parent = <&PIC>;
+			interrupts = <14 8>;
 		};
+	};
+
+
+	pci@f0010800 {
+		device_type = "pci";
+		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		clock-frequency = <d#66666666>;
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+		                 /* IDSEL 0x16 */
+		                 b000 0 0 1 &PCI_PIC 0
+		                 b000 0 0 2 &PCI_PIC 1
+		                 b000 0 0 3 &PCI_PIC 2
+		                 b000 0 0 4 &PCI_PIC 3
+
+		                 /* IDSEL 0x17 */
+		                 b800 0 0 1 &PCI_PIC 4
+		                 b800 0 0 2 &PCI_PIC 5
+		                 b800 0 0 3 &PCI_PIC 6
+		                 b800 0 0 4 &PCI_PIC 7
+
+		                 /* IDSEL 0x18 */
+		                 c000 0 0 1 &PCI_PIC 8
+		                 c000 0 0 2 &PCI_PIC 9
+		                 c000 0 0 3 &PCI_PIC a
+		                 c000 0 0 4 &PCI_PIC b>;
+
+		interrupt-parent = <&PIC>;
+		interrupts = <12 8>;
+		ranges = <42000000 0 80000000 80000000 0 20000000
+		          02000000 0 a0000000 a0000000 0 20000000
+		          01000000 0 00000000 f6000000 0 02000000>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8272", "fsl,pq2-soc";
+		ranges = <00000000 f0000000 00053000>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <f0000000 00053000>;
 
-		cpm@f0000000 {
+		cpm@119c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			device_type = "cpm";
-			model = "CPM2";
-			ranges = <00000000 00000000 20000>;
-			reg = <0 20000>;
-			command-proc = <119c0>;
-			brg-frequency = <17D7840>;
-			cpm_clk = <BEBC200>;
-
-			scc@11a00 {
+			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+			reg = <119c0 30 0 2000>;
+			ranges;
+
+			brg@119f0 {
+				compatible = "fsl,mpc8272-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <119f0 10 115f0 10>;
+			};
+
+			serial@11a00 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SCC";
-				device-id = <1>;
+				compatible = "fsl,mpc8272-scc-uart",
+				             "fsl,cpm2-scc-uart";
 				reg = <11a00 20 8000 100>;
-				current-speed = <1c200>;
-				interrupts = <28 2>;
-				interrupt-parent = <&Cpm_pic>;
-				clock-setup = <0 00ffffff>;
-				rx-clock = <1>;
-				tx-clock = <1>;
+				interrupts = <28 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <00800000>;
 			};
 
-			scc@11a60 {
+			serial@11a60 {
 				device_type = "serial";
-				compatible = "cpm_uart";
-				model = "SCC";
-				device-id = <4>;
+				compatible = "fsl,mpc8272-scc-uart",
+				             "fsl,cpm2-scc-uart";
 				reg = <11a60 20 8300 100>;
-				current-speed = <1c200>;
-				interrupts = <2b 2>;
-				interrupt-parent = <&Cpm_pic>;
-				clock-setup = <1b ffffff00>;
-				rx-clock = <4>;
-				tx-clock = <4>;
+				interrupts = <2b 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <4>;
+				fsl,cpm-command = <0ce00000>;
+			};
+
+			mdio@10d40 {
+				device_type = "mdio";
+				compatible = "fsl,mpc8272ads-mdio-bitbang",
+				             "fsl,mpc8272-mdio-bitbang",
+				             "fsl,cpm2-mdio-bitbang";
+				reg = <10d40 14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					interrupts = <17 8>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					interrupts = <17 8>;
+					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+			};
+
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,mpc8272-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <11300 20 8400 100 11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <20 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <12000300>;
+			};
+
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8272-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <11320 20 8500 100 113b0 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <21 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <16200300>;
 			};
 		};
 
-		cpm_pic:interrupt-controller@10c00 {
-			#address-cells = <0>;
+		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <10c00 80>;
-			device_type = "cpm-pic";
-			compatible = "CPM2";
-		};
-
-		pci@0500 {
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "8272";
-			device_type = "pci";
-			reg = <10430 4dc>;
-			clock-frequency = <3f940aa>;
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-			                /* IDSEL 0x16 */
-			                 b000 0 0 1 f8200000 40 8
-			                 b000 0 0 2 f8200000 41 8
-			                 b000 0 0 3 f8200000 42 8
-			                 b000 0 0 4 f8200000 43 8
-
-			                /* IDSEL 0x17 */
-			                 b800 0 0 1 f8200000 43 8
-			                 b800 0 0 2 f8200000 40 8
-			                 b800 0 0 3 f8200000 41 8
-			                 b800 0 0 4 f8200000 42 8
-
-			                /* IDSEL 0x18 */
-			                 c000 0 0 1 f8200000 42 8
-			                 c000 0 0 2 f8200000 43 8
-			                 c000 0 0 3 f8200000 40 8
-			                 c000 0 0 4 f8200000 41 8>;
-			interrupt-parent = <&Cpm_pic>;
-			interrupts = <14 8>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 80000000 80000000 0 40000000
-			          01000000 0 00000000 f6000000 0 02000000>;
+			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
 /* May need to remove if on a part without crypto engine */
 		crypto@30000 {
 			device_type = "crypto";
 			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,mpc8272-talitos-sec2",
+			             "fsl,talitos-sec2",
+			             "fsl,talitos",
+			             "talitos";
 			reg = <30000 10000>;
-			interrupts = <b 2>;
-			interrupt-parent = <&Cpm_pic>;
+			interrupts = <b 8>;
+			interrupt-parent = <&PIC>;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <0000007e>;
@@ -210,4 +231,8 @@
 			descriptor-types-mask = <01010ebf>;
 		};
 	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@11a00";
+	};
 };
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 4b68032..6b7951e 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.23-rc4
-# Tue Aug 28 21:24:39 2007
+# Wed Sep  5 12:43:23 2007
 #
 # CONFIG_PPC64 is not set
 
@@ -52,7 +52,7 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="powerpc8272"
+CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -71,7 +71,7 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,10 +122,11 @@ CONFIG_PPC_82xx=y
 # CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_MPC82xx_ADS=y
+CONFIG_MPC8272_ADS=y
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -137,7 +138,9 @@ CONFIG_8272=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
 
 #
 # Kernel options
@@ -168,18 +171,25 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_WANT_DEVICE_TREE=y
+# CONFIG_BUILD_RAW_IMAGE is not set
+CONFIG_DEVICE_TREE="mpc8272ads.dts"
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -313,43 +323,101 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_SBC8240 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -360,6 +428,21 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# An alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -367,6 +450,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -382,13 +466,42 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -396,6 +509,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
 CONFIG_PPP=y
 # CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
@@ -459,6 +573,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -488,6 +603,7 @@ CONFIG_SERIAL_CPM_SCC1=y
 CONFIG_SERIAL_CPM_SCC4=y
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -497,7 +613,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -531,7 +651,7 @@ CONFIG_DAB=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 
@@ -539,45 +659,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Sound
 #
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -614,11 +700,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -659,6 +741,7 @@ CONFIG_RAMFS=y
 # Miscellaneous filesystems
 #
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -680,8 +763,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -775,7 +857,7 @@ CONFIG_HAS_DMA=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -793,7 +875,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
@@ -845,4 +927,4 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index f260c01..03f5aeb 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -10,6 +10,8 @@ config MPC8272_ADS
 	select 8272
 	select 8260
 	select FSL_SOC
+	select PQ2_ADS_PCI_PIC if PCI
+	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the MPC8272 ADS board
 
@@ -34,3 +36,6 @@ config 8272
 	help
 	  The MPC8272 CPM has a different internal dpram setup than other CPM2
 	  devices
+
+config PQ2_ADS_PCI_PIC
+	bool
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index 9b7c851..bfcb64c 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -2,3 +2,5 @@
 # Makefile for the PowerPC 82xx linux kernel.
 #
 obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
+obj-$(CONFIG_CPM2) += pq2.o
+obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 97d8dc4..fd83440 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -1,9 +1,10 @@
 /*
- * MPC8272_ads setup and early boot code plus other random bits.
+ * MPC8272 ADS board support
  *
- * Author: Vitaly Bordug <vbordug@ru.mvista.com>
- * m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
  *
+ * Based on code by Vitaly Bordug <vbordug@ru.mvista.com>
  * Copyright (c) 2006 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -12,614 +13,184 @@
  * option) any later version.
  */
 
-#include <linux/stddef.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
 #include <linux/fsl_devices.h>
-#include <linux/fs_uart_pd.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
 
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
 #include <asm/cpm2.h>
 #include <asm/udbg.h>
-#include <asm/i8259.h>
-#include <linux/fs_enet_pd.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#include <platforms/82xx/pq2.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/cpm2_pic.h>
 
 #include "pq2ads.h"
-
-#ifdef CONFIG_PCI
-static uint pci_clk_frq;
-static struct {
-	unsigned long *pci_int_stat_reg;
-	unsigned long *pci_int_mask_reg;
-} pci_regs;
-
-static unsigned long pci_int_base;
-static struct irq_host *pci_pic_host;
-#endif
+#include "pq2.h"
 
 static void __init mpc8272_ads_pic_init(void)
 {
-	struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
-	struct resource r;
-	cpm2_map_t *cpm_reg;
-
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
-		return;
-	}
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "PIC init: invalid resource\n");
-		of_node_put(np);
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+	                                                 "fsl,cpm2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
 		return;
 	}
+
 	cpm2_pic_init(np);
 	of_node_put(np);
 
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
-	cpm_reg->im_intctl.ic_siprr = 0x05309770;
-	iounmap(cpm_reg);
-#ifdef CONFIG_PCI
 	/* Initialize stuff for the 82xx CPLD IC and install demux  */
-	m82xx_pci_init_irq();
-#endif
+	pq2ads_pci_init_irq();
 }
 
-static void init_fcc1_ioports(struct fs_platform_info *fpi)
-{
-	struct io_port *io;
-	u32 tempval;
-	cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
-	struct device_node *np;
-	struct resource r;
-	u32 *bcsr;
-
-	np = of_find_node_by_type(NULL, "memory");
-	if (!np) {
-		printk(KERN_INFO "No memory node in device tree\n");
-		return;
-	}
-	if (of_address_to_resource(np, 1, &r)) {
-		printk(KERN_INFO "No memory reg property [1] in devicetree\n");
-		return;
-	}
-	of_node_put(np);
-	bcsr = ioremap(r.start + 4, sizeof(u32));
-	io = &immap->im_ioport;
-
-	/* Enable the PHY */
-	clrbits32(bcsr, BCSR1_FETHIEN);
-	setbits32(bcsr, BCSR1_FETH_RST);
-
-	/* FCC1 pins are on port A/C. */
-	/* Configure port A and C pins for FCC1 Ethernet. */
-
-	tempval = in_be32(&io->iop_pdira);
-	tempval &= ~PA1_DIRA0;
-	tempval |= PA1_DIRA1;
-	out_be32(&io->iop_pdira, tempval);
-
-	tempval = in_be32(&io->iop_psora);
-	tempval &= ~PA1_PSORA0;
-	tempval |= PA1_PSORA1;
-	out_be32(&io->iop_psora, tempval);
-
-	setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
-
-	/* Alter clocks */
-	tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
-
-	clrbits32(&io->iop_psorc, tempval);
-	clrbits32(&io->iop_pdirc, tempval);
-	setbits32(&io->iop_pparc, tempval);
-
-	cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
+struct cpm_pin {
+	int port, pin, flags;
+};
 
-	iounmap(bcsr);
-	iounmap(immap);
-}
+static struct cpm_pin mpc8272_ads_pins[] = {
+	/* SCC1 */
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC4 */
+	{3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{2, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
 
-static void init_fcc2_ioports(struct fs_platform_info *fpi)
+static void __init init_ioports(void)
 {
-	cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
-	struct device_node *np;
-	struct resource r;
-	u32 *bcsr;
-
-	struct io_port *io;
-	u32 tempval;
-
-	np = of_find_node_by_type(NULL, "memory");
-	if (!np) {
-		printk(KERN_INFO "No memory node in device tree\n");
-		return;
-	}
-	if (of_address_to_resource(np, 1, &r)) {
-		printk(KERN_INFO "No memory reg property [1] in devicetree\n");
-		return;
-	}
-	of_node_put(np);
-	io = &immap->im_ioport;
-	bcsr = ioremap(r.start + 12, sizeof(u32));
-
-	/* Enable the PHY */
-	clrbits32(bcsr, BCSR3_FETHIEN2);
-	setbits32(bcsr, BCSR3_FETH2_RST);
-
-	/* FCC2 are port B/C. */
-	/* Configure port A and C pins for FCC2 Ethernet. */
-
-	tempval = in_be32(&io->iop_pdirb);
-	tempval &= ~PB2_DIRB0;
-	tempval |= PB2_DIRB1;
-	out_be32(&io->iop_pdirb, tempval);
-
-	tempval = in_be32(&io->iop_psorb);
-	tempval &= ~PB2_PSORB0;
-	tempval |= PB2_PSORB1;
-	out_be32(&io->iop_psorb, tempval);
-
-	setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
-
-	tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
-
-	/* Alter clocks */
-	clrbits32(&io->iop_psorc, tempval);
-	clrbits32(&io->iop_pdirc, tempval);
-	setbits32(&io->iop_pparc, tempval);
-
-	cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
-
-	iounmap(bcsr);
-	iounmap(immap);
-}
+	int i;
 
-void init_fcc_ioports(struct fs_platform_info *fpi)
-{
-	int fcc_no = fs_get_fcc_index(fpi->fs_no);
-
-	switch (fcc_no) {
-	case 0:
-		init_fcc1_ioports(fpi);
-		break;
-	case 1:
-		init_fcc2_ioports(fpi);
-		break;
-	default:
-		printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
-		return;
+	for (i = 0; i < ARRAY_SIZE(mpc8272_ads_pins); i++) {
+		struct cpm_pin *pin = &mpc8272_ads_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
-}
 
-static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
-{
-	cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
-
-	/* SCC1 is only on port D */
-	setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
-	clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
-	setbits32(&immap->im_ioport.iop_psord, 0x00000002);
-	clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
-	setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
-
-	clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
-	clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
-	setbits32(&immap->im_cpmux.cmx_scr,
-		  ((data->clk_tx - 1) << (4 - data->clk_tx)));
-	setbits32(&immap->im_cpmux.cmx_scr,
-		  ((data->clk_rx - 1) << (4 - data->clk_rx)));
-
-	iounmap(immap);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK15, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK16, CPM_CLK_TX);
 }
 
-static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
+static void __init mpc8272_ads_setup_arch(void)
 {
-	cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
-
-	setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
-	clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
-	clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
-	setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
-
-	clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
-	clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
-	setbits32(&immap->im_cpmux.cmx_scr,
-		  ((data->clk_tx - 1) << (4 - data->clk_tx)));
-	setbits32(&immap->im_cpmux.cmx_scr,
-		  ((data->clk_rx - 1) << (4 - data->clk_rx)));
-
-	iounmap(immap);
-}
+	struct device_node *np;
+	__be32 __iomem *bcsr;
 
-void init_scc_ioports(struct fs_uart_platform_info *data)
-{
-	int scc_no = fs_get_scc_index(data->fs_no);
-
-	switch (scc_no) {
-	case 0:
-		init_scc1_uart_ioports(data);
-		data->brg = data->clk_rx;
-		break;
-	case 3:
-		init_scc4_uart_ioports(data);
-		data->brg = data->clk_rx;
-		break;
-	default:
-		printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
-		return;
-	}
-}
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8272_ads_setup_arch()", 0);
 
-void __init m82xx_board_setup(void)
-{
-	cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
-	struct device_node *np;
-	struct resource r;
-	u32 *bcsr;
+	cpm2_reset();
 
-	np = of_find_node_by_type(NULL, "memory");
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8272ads-bcsr");
 	if (!np) {
-		printk(KERN_INFO "No memory node in device tree\n");
+		printk(KERN_ERR "No bcsr in device tree\n");
 		return;
 	}
-	if (of_address_to_resource(np, 1, &r)) {
-		printk(KERN_INFO "No memory reg property [1] in devicetree\n");
+
+	bcsr = of_iomap(np, 0);
+	if (!bcsr) {
+		printk(KERN_ERR "Cannot map BCSR registers\n");
 		return;
 	}
-	of_node_put(np);
-	bcsr = ioremap(r.start + 4, sizeof(u32));
-	/* Enable the 2nd UART port */
-	clrbits32(bcsr, BCSR1_RS232_EN2);
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
-		  UART_SCCM_TX | UART_SCCM_RX);
-	clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
-		  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
-		  UART_SCCM_TX | UART_SCCM_RX);
-	clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
-		  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
-		  UART_SCCM_TX | UART_SCCM_RX);
-	clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
-		  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
-		  UART_SCCM_TX | UART_SCCM_RX);
-	clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
-		  SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-
-	iounmap(bcsr);
-	iounmap(immap);
-}
-
-#ifdef CONFIG_PCI
-static void m82xx_pci_mask_irq(unsigned int irq)
-{
-	int bit = irq - pci_int_base;
 
-	*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
-	return;
-}
+	of_node_put(np);
 
-static void m82xx_pci_unmask_irq(unsigned int irq)
-{
-	int bit = irq - pci_int_base;
+	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
+	setbits32(&bcsr[1], BCSR1_FETH_RST);
 
-	*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
-	return;
-}
+	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
+	setbits32(&bcsr[3], BCSR3_FETH2_RST);
 
-static void m82xx_pci_mask_and_ack(unsigned int irq)
-{
-	int bit = irq - pci_int_base;
-
-	*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
-	return;
-}
+	iounmap(bcsr);
 
-static void m82xx_pci_end_irq(unsigned int irq)
-{
-	int bit = irq - pci_int_base;
+	init_ioports();
+	pq2_init_pci();
 
-	*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
-	return;
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0);
 }
 
-struct hw_interrupt_type m82xx_pci_ic = {
-	.typename = "MPC82xx ADS PCI",
-	.name = "MPC82xx ADS PCI",
-	.enable = m82xx_pci_unmask_irq,
-	.disable = m82xx_pci_mask_irq,
-	.ack = m82xx_pci_mask_and_ack,
-	.end = m82xx_pci_end_irq,
-	.mask = m82xx_pci_mask_irq,
-	.mask_ack = m82xx_pci_mask_and_ack,
-	.unmask = m82xx_pci_unmask_irq,
-	.eoi = m82xx_pci_end_irq,
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
 };
 
-static void
-m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc)
+static int __init declare_of_platform_devices(void)
 {
-	unsigned long stat, mask, pend;
-	int bit;
-
-	for (;;) {
-		stat = *pci_regs.pci_int_stat_reg;
-		mask = *pci_regs.pci_int_mask_reg;
-		pend = stat & ~mask & 0xf0000000;
-		if (!pend)
-			break;
-		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-			if (pend & 0x80000000)
-				__do_IRQ(pci_int_base + bit);
-		}
-	}
-}
+	if (!machine_is(mpc8272_ads))
+		return 0;
 
-static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
-			    irq_hw_number_t hw)
-{
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
-	set_irq_chip(virq, &m82xx_pci_ic);
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
 	return 0;
 }
-
-static void pci_host_unmap(struct irq_host *h, unsigned int virq)
-{
-	/* remove chip and handler */
-	set_irq_chip(virq, NULL);
-}
-
-static struct irq_host_ops pci_pic_host_ops = {
-	.map = pci_pic_host_map,
-	.unmap = pci_host_unmap,
-};
-
-void m82xx_pci_init_irq(void)
-{
-	int irq;
-	cpm2_map_t *immap;
-	struct device_node *np;
-	struct resource r;
-	const u32 *regs;
-	unsigned int size;
-	const u32 *irq_map;
-	int i;
-	unsigned int irq_max, irq_min;
-
-	if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
-		printk(KERN_INFO "No SOC node in device tree\n");
-		return;
-	}
-	memset(&r, 0, sizeof(r));
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_INFO "No SOC reg property in device tree\n");
-		return;
-	}
-	immap = ioremap(r.start, sizeof(*immap));
-	of_node_put(np);
-
-	/* install the demultiplexer for the PCI cascade interrupt */
-	np = of_find_node_by_type(NULL, "pci");
-	if (!np) {
-		printk(KERN_INFO "No pci node on device tree\n");
-		iounmap(immap);
-		return;
-	}
-	irq_map = of_get_property(np, "interrupt-map", &size);
-	if ((!irq_map) || (size <= 7)) {
-		printk(KERN_INFO "No interrupt-map property of pci node\n");
-		iounmap(immap);
-		return;
-	}
-	size /= sizeof(irq_map[0]);
-	for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
-		if (irq_map[5] < irq_min)
-			irq_min = irq_map[5];
-		if (irq_map[5] > irq_max)
-			irq_max = irq_map[5];
-	}
-	pci_int_base = irq_min;
-	irq = irq_of_parse_and_map(np, 0);
-	set_irq_chained_handler(irq, m82xx_pci_irq_demux);
-	of_node_put(np);
-	np = of_find_node_by_type(NULL, "pci-pic");
-	if (!np) {
-		printk(KERN_INFO "No pci pic node on device tree\n");
-		iounmap(immap);
-		return;
-	}
-	/* PCI interrupt controller registers: status and mask */
-	regs = of_get_property(np, "reg", &size);
-	if ((!regs) || (size <= 2)) {
-		printk(KERN_INFO "No reg property in pci pic node\n");
-		iounmap(immap);
-		return;
-	}
-	pci_regs.pci_int_stat_reg =
-	    ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
-	pci_regs.pci_int_mask_reg =
-	    ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
-	/* configure chip select for PCI interrupt controller */
-	immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
-	immap->im_memctl.memc_or3 = 0xffff8010;
-	/* make PCI IRQ level sensitive */
-	immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
-
-	/* mask all PCI interrupts */
-	*pci_regs.pci_int_mask_reg |= 0xfff00000;
-	iounmap(immap);
-	pci_pic_host =
-	    irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
-			   &pci_pic_host_ops, irq_max + 1);
-	return;
-}
-
-static int m82xx_pci_exclude_device(struct pci_controller *hose,
-				    u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-static void __init mpc82xx_add_bridge(struct device_node *np)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource r;
-	const int *bus_range;
-	const uint *ptr;
-
-	memset(&r, 0, sizeof(r));
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_INFO "No PCI reg property in device tree\n");
-		return;
-	}
-	if (!(ptr = of_get_property(np, "clock-frequency", NULL))) {
-		printk(KERN_INFO "No clock-frequency property in PCI node");
-		return;
-	}
-	pci_clk_frq = *ptr;
-	of_node_put(np);
-	bus_range = of_get_property(np, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", np->full_name);
-	}
-
-	pci_assign_all_buses = 1;
-
-	hose = pcibios_alloc_controller(np);
-
-	if (!hose)
-		return;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	setup_indirect_pci(hose,
-			   r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
-			   r.start + offsetof(pci_cpm2_t, pci_cfg_data),
-			   0);
-
-	pci_process_bridge_OF_ranges(hose, np, 1);
-}
-#endif
-
-/*
- * Setup the architecture
- */
-static void __init mpc8272_ads_setup_arch(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8272_ads_setup_arch()", 0);
-	cpm2_reset();
-
-	/* Map I/O region to a 256MB BAT */
-
-	m82xx_board_setup();
-
-#ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-		mpc82xx_add_bridge(np);
-
-	of_node_put(np);
-#endif
-
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8272_ads_setup_arch(), finish", 0);
-}
+device_initcall(declare_of_platform_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
  */
 static int __init mpc8272_ads_probe(void)
 {
-	/* We always match for now, eventually we should look at
-	 * the flat dev tree to ensure this is the board we are
-	 * supposed to run on
-	 */
-	return 1;
-}
-
-#define RMR_CSRE 0x00000001
-static void m82xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-	((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
-
-	/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
-	mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
-	dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
-	printk("Restart failed\n");
-	while (1) ;
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "fsl,mpc8272ads");
 }
 
 define_machine(mpc8272_ads)
 {
-	.name = "MPC8272 ADS",
+	.name = "Freescale MPC8272 ADS",
 	.probe = mpc8272_ads_probe,
 	.setup_arch = mpc8272_ads_setup_arch,
 	.init_IRQ = mpc8272_ads_pic_init,
-	.show_cpuinfo = mpc8272_ads_show_cpuinfo,
 	.get_irq = cpm2_get_irq,
 	.calibrate_decr = generic_calibrate_decr,
-	.restart = m82xx_restart,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
 };
diff --git a/arch/powerpc/platforms/82xx/pq2.c b/arch/powerpc/platforms/82xx/pq2.c
new file mode 100644
index 0000000..a497cba
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2.c
@@ -0,0 +1,82 @@
+/*
+ * Common PowerQUICC II code.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor
+ *
+ * Based on code by Vitaly Bordug <vbordug@ru.mvista.com>
+ * pq2_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/cpm2.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/system.h>
+
+#include <platforms/82xx/pq2.h>
+
+#define RMR_CSRE 0x00000001
+
+void pq2_restart(char *cmd)
+{
+	local_irq_disable();
+	setbits32(&cpm2_immr->im_clkrst.car_rmr, RMR_CSRE);
+
+	/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
+	mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
+	in_8(&cpm2_immr->im_clkrst.res[0]);
+
+	panic("Restart failed\n");
+}
+
+#ifdef CONFIG_PCI
+static int pq2_pci_exclude_device(struct pci_controller *hose,
+                                  u_char bus, u8 devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static void __init pq2_pci_add_bridge(struct device_node *np)
+{
+	struct pci_controller *hose;
+	struct resource r;
+
+	if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b)
+		goto err;
+
+	pci_assign_all_buses = 1;
+
+	hose = pcibios_alloc_controller(np);
+	if (!hose)
+		return;
+
+	hose->arch_data = np;
+
+	setup_indirect_pci(hose, r.start + 0x100, r.start + 0x104, 0);
+	pci_process_bridge_OF_ranges(hose, np, 1);
+
+	return;
+
+err:
+	printk(KERN_ERR "No valid PCI reg property in device tree\n");
+}
+
+void __init pq2_init_pci(void)
+{
+	struct device_node *np = NULL;
+
+	ppc_md.pci_exclude_device = pq2_pci_exclude_device;
+
+	while ((np = of_find_compatible_node(np, NULL, "fsl,pq2-pci")))
+		pq2_pci_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/82xx/pq2.h b/arch/powerpc/platforms/82xx/pq2.h
new file mode 100644
index 0000000..a41f84a
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2.h
@@ -0,0 +1,20 @@
+#ifndef _PQ2_H
+#define _PQ2_H
+
+void pq2_restart(char *cmd);
+
+#ifdef CONFIG_PCI
+int pq2ads_pci_init_irq(void);
+void pq2_init_pci(void);
+#else
+static inline int pq2ads_pci_init_irq(void)
+{
+	return 0;
+}
+
+static inline void pq2_init_pci(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
new file mode 100644
index 0000000..a801381
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -0,0 +1,195 @@
+/*
+ * PQ2 ADS-style PCI interrupt controller
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Loosely based on mpc82xx ADS support by Vitaly Bordug <vbordug@ru.mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/cpm2.h>
+
+#include "pq2.h"
+
+static DEFINE_SPINLOCK(pci_pic_lock);
+
+struct pq2ads_pci_pic {
+	struct device_node *node;
+	struct irq_host *host;
+
+	struct {
+		u32 stat;
+		u32 mask;
+	} __iomem *regs;
+};
+
+#define NUM_IRQS 32
+
+static void pq2ads_pci_mask_irq(unsigned int virq)
+{
+	struct pq2ads_pci_pic *priv = get_irq_chip_data(virq);
+	int irq = NUM_IRQS - virq_to_hw(virq) - 1;
+
+	if (irq != -1) {
+		unsigned long flags;
+		spin_lock_irqsave(&pci_pic_lock, flags);
+
+		setbits32(&priv->regs->mask, 1 << irq);
+		mb();
+
+		spin_unlock_irqrestore(&pci_pic_lock, flags);
+	}
+}
+
+static void pq2ads_pci_unmask_irq(unsigned int virq)
+{
+	struct pq2ads_pci_pic *priv = get_irq_chip_data(virq);
+	int irq = NUM_IRQS - virq_to_hw(virq) - 1;
+
+	if (irq != -1) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&pci_pic_lock, flags);
+		clrbits32(&priv->regs->mask, 1 << irq);
+		spin_unlock_irqrestore(&pci_pic_lock, flags);
+	}
+}
+
+static struct irq_chip pq2ads_pci_ic = {
+	.typename = "PQ2 ADS PCI",
+	.name = "PQ2 ADS PCI",
+	.end = pq2ads_pci_unmask_irq,
+	.mask = pq2ads_pci_mask_irq,
+	.mask_ack = pq2ads_pci_mask_irq,
+	.ack = pq2ads_pci_mask_irq,
+	.unmask = pq2ads_pci_unmask_irq,
+	.enable = pq2ads_pci_unmask_irq,
+	.disable = pq2ads_pci_mask_irq
+};
+
+static void pq2ads_pci_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct pq2ads_pci_pic *priv = desc->handler_data;
+	u32 stat, mask, pend;
+	int bit;
+
+	for (;;) {
+		stat = in_be32(&priv->regs->stat);
+		mask = in_be32(&priv->regs->mask);
+
+		pend = stat & ~mask;
+
+		if (!pend)
+			break;
+
+		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+			if (pend & 0x80000000) {
+				int virq = irq_linear_revmap(priv->host, bit);
+				generic_handle_irq(virq);
+			}
+		}
+	}
+}
+
+static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
+			    irq_hw_number_t hw)
+{
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_data(virq, h->host_data);
+	set_irq_chip(virq, &pq2ads_pci_ic);
+	return 0;
+}
+
+static void pci_host_unmap(struct irq_host *h, unsigned int virq)
+{
+	/* remove chip and handler */
+	set_irq_chip_data(virq, NULL);
+	set_irq_chip(virq, NULL);
+}
+
+static struct irq_host_ops pci_pic_host_ops = {
+	.map = pci_pic_host_map,
+	.unmap = pci_host_unmap,
+};
+
+int __init pq2ads_pci_init_irq(void)
+{
+	struct pq2ads_pci_pic *priv;
+	struct irq_host *host;
+	struct device_node *np;
+	int ret = -ENODEV;
+	int irq;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq2ads-pci-pic");
+	if (!np) {
+		printk(KERN_ERR "No pci pic node in device tree.\n");
+		of_node_put(np);
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR "No interrupt in pci pic node.\n");
+		of_node_put(np);
+		goto out;
+	}
+
+	priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+	if (!priv) {
+		of_node_put(np);
+		ret = -ENOMEM;
+		goto out_unmap_irq;
+	}
+
+	/* PCI interrupt controller registers: status and mask */
+	priv->regs = of_iomap(np, 0);
+	if (!priv->regs) {
+		printk(KERN_ERR "Cannot map PCI PIC registers.\n");
+		goto out_free_bootmem;
+	}
+
+	/* mask all PCI interrupts */
+	out_be32(&priv->regs->mask, ~0);
+	mb();
+
+	host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, NUM_IRQS,
+	                      &pci_pic_host_ops, NUM_IRQS);
+	if (!host) {
+		ret = -ENOMEM;
+		goto out_unmap_regs;
+	}
+
+	host->host_data = priv;
+
+	priv->host = host;
+	host->host_data = priv;
+	set_irq_data(irq, priv);
+	set_irq_chained_handler(irq, pq2ads_pci_irq_demux);
+
+	of_node_put(np);
+	return 0;
+
+out_unmap_regs:
+	iounmap(priv->regs);
+out_free_bootmem:
+	free_bootmem((unsigned long)priv,
+	             sizeof(sizeof(struct pq2ads_pci_pic)));
+	of_node_put(np);
+out_unmap_irq:
+	irq_dispose_mapping(irq);
+out:
+	return ret;
+}
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index 8b67048..984db42 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -53,7 +53,5 @@
 #define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
 #define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
 
-void m82xx_pci_init_irq(void);
-
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */
-- 
1.5.3.1

[PATCH 28/28] mpc82xx: Add pq2fads board support.

[Scott Wood]

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/pq2fads.dts      |  229 ++++++++
 arch/powerpc/configs/pq2fads_defconfig | 1003 ++++++++++++++++++++++++++++++++
 arch/powerpc/platforms/82xx/Kconfig    |   11 +
 arch/powerpc/platforms/82xx/Makefile   |    1 +
 arch/powerpc/platforms/82xx/pq2fads.c  |  198 +++++++
 5 files changed, 1442 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/pq2fads.dts
 create mode 100644 arch/powerpc/configs/pq2fads_defconfig
 create mode 100644 arch/powerpc/platforms/82xx/pq2fads.c

diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
new file mode 100644
index 0000000..54e8bd1
--- /dev/null
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -0,0 +1,229 @@
+/*
+ * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "pq2fads";
+	compatible = "fsl,pq2fads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <d#32>;
+			i-cache-line-size = <d#32>;
+			d-cache-size = <d#16384>;
+			i-cache-size = <d#16384>;
+			timebase-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8280-localbus",
+		             "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <f0010100 60>;
+
+		ranges = <0 0 fe000000 00800000
+		          1 0 f4500000 00008000
+		          8 0 f8200000 00008000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0 0 800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			reg = <1 0 20>;
+			compatible = "fsl,pq2fads-bcsr";
+		};
+
+		PCI_PIC: pic@8,0 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <8 0 8>;
+			compatible = "fsl,pq2ads-pci-pic";
+			interrupt-parent = <&PIC>;
+			interrupts = <18 8>;
+		};
+	};
+
+	pci@f0010800 {
+		device_type = "pci";
+		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		clock-frequency = <d#66000000>;
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+		                /* IDSEL 0x16 */
+		                 b000 0 0 1 &PCI_PIC 0
+		                 b000 0 0 2 &PCI_PIC 1
+		                 b000 0 0 3 &PCI_PIC 2
+		                 b000 0 0 4 &PCI_PIC 3
+
+		                /* IDSEL 0x17 */
+		                 b800 0 0 1 &PCI_PIC 4
+		                 b800 0 0 2 &PCI_PIC 5
+		                 b800 0 0 3 &PCI_PIC 6
+		                 b800 0 0 4 &PCI_PIC 7
+
+		                /* IDSEL 0x18 */
+		                 c000 0 0 1 &PCI_PIC 8
+		                 c000 0 0 2 &PCI_PIC 9
+		                 c000 0 0 3 &PCI_PIC a
+		                 c000 0 0 4 &PCI_PIC b>;
+
+		interrupt-parent = <&PIC>;
+		interrupts = <12 8>;
+		ranges = <42000000 0 80000000 80000000 0 20000000
+		          02000000 0 a0000000 a0000000 0 20000000
+		          01000000 0 00000000 f6000000 0 02000000>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8280", "fsl,pq2-soc";
+		ranges = <00000000 f0000000 00053000>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <f0000000 00053000>;
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
+			reg = <119c0 30 0 2000>;
+			ranges;
+
+			brg@119f0 {
+				compatible = "fsl,mpc8280-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <119f0 10 115f0 10>;
+			};
+
+			serial@11a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8280-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <11a00 20 8000 100>;
+				interrupts = <28 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <00800000>;
+			};
+
+			serial@11a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8280-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <11a20 20 8100 100>;
+				interrupts = <29 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <04a00000>;
+			};
+
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8280-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <11320 20 8500 100 113b0 1>;
+				interrupts = <21 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <16200300>;
+			};
+
+			ethernet@11340 {
+				device_type = "network";
+				compatible = "fsl,mpc8280-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <11340 20 8600 100 113d0 1>;
+				interrupts = <22 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <1a400300>;
+				local-mac-address = [00 e0 0c 00 79 01];
+			};
+
+			mdio@10d40 {
+				device_type = "mdio";
+				compatible = "fsl,pq2fads-mdio-bitbang",
+				             "fsl,mpc8280-mdio-bitbang",
+				             "fsl,cpm2-mdio-bitbang";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10d40 14>;
+				fsl,mdio-pin = <9>;
+				fsl,mdc-pin = <a>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					interrupts = <19 2>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					interrupts = <19 2>;
+					reg = <3>;
+					device_type = "ethernet-phy";
+				};
+			};
+
+			usb@11b60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc8280-usb",
+				             "fsl,cpm2-usb";
+				reg = <11b60 18 8b00 100>;
+				interrupt-parent = <&PIC>;
+				interrupts = <b 8>;
+				fsl,cpm-command = <2e600000>;
+			};
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <10c00 80>;
+			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@11a00";
+	};
+};
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
new file mode 100644
index 0000000..a51fc39
--- /dev/null
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -0,0 +1,1003 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc4
+# Thu Aug 30 11:58:17 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_82xx=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_MPC8272_ADS is not set
+CONFIG_PQ2FADS=y
+# CONFIG_EP8248E is not set
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="pq2fads.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_8260_PCI9 is not set
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_SBC8240 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# An alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+CONFIG_SERIAL_CPM_SCC4=y
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_BDI_SWITCH=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 03f5aeb..541fbb8 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -15,6 +15,17 @@ config MPC8272_ADS
 	help
 	  This option enables support for the MPC8272 ADS board
 
+config PQ2FADS
+	bool "Freescale PQ2FADS"
+	select DEFAULT_UIMAGE
+	select PQ2ADS
+	select 8260
+	select FSL_SOC
+	select PQ2_ADS_PCI_PIC if PCI
+	select PPC_CPM_NEW_BINDING
+	help
+	  This option enables support for the PQ2FADS board
+
 endchoice
 
 config PQ2ADS
diff --git a/arch/powerpc/platforms/82xx/Makefile b/arch/powerpc/platforms/82xx/Makefile
index bfcb64c..68c8b0c 100644
--- a/arch/powerpc/platforms/82xx/Makefile
+++ b/arch/powerpc/platforms/82xx/Makefile
@@ -4,3 +4,4 @@
 obj-$(CONFIG_MPC8272_ADS) += mpc8272_ads.o
 obj-$(CONFIG_CPM2) += pq2.o
 obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
+obj-$(CONFIG_PQ2FADS) += pq2fads.o
diff --git a/arch/powerpc/platforms/82xx/pq2fads.c b/arch/powerpc/platforms/82xx/pq2fads.c
new file mode 100644
index 0000000..4f457a9
--- /dev/null
+++ b/arch/powerpc/platforms/82xx/pq2fads.c
@@ -0,0 +1,198 @@
+/*
+ * PQ2FADS board support
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Loosely based on mp82xx ADS support by Vitaly Bordug <vbordug@ru.mvista.com>
+ * Copyright (c) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/io.h>
+#include <asm/cpm2.h>
+#include <asm/udbg.h>
+#include <asm/machdep.h>
+#include <asm/of_platform.h>
+#include <asm/time.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/cpm2_pic.h>
+
+#include "pq2ads.h"
+#include "pq2.h"
+
+static void __init pq2fads_pic_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (!np) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+
+	/* Initialize stuff for the 82xx CPLD IC and install demux  */
+	pq2ads_pci_init_irq();
+}
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin pq2fads_pins[] = {
+	/* SCC1 */
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC2 */
+	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC3 */
+	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pq2fads_pins); i++) {
+		struct cpm_pin *pin = &pq2fads_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
+}
+
+static void __init pq2fads_setup_arch(void)
+{
+	struct device_node *np;
+	__be32 __iomem *bcsr;
+
+	if (ppc_md.progress)
+		ppc_md.progress("pq2fads_setup_arch()", 0);
+
+	cpm2_reset();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq2fads-bcsr");
+	if (!np) {
+		printk(KERN_ERR "No fsl,pq2fads-bcsr in device tree\n");
+		return;
+	}
+
+	bcsr = of_iomap(np, 0);
+	if (!bcsr) {
+		printk(KERN_ERR "Cannot map BCSR registers\n");
+		return;
+	}
+
+	of_node_put(np);
+
+	/* Enable the serial and ethernet ports */
+
+	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
+	setbits32(&bcsr[1], BCSR1_FETH_RST);
+
+	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
+	setbits32(&bcsr[3], BCSR3_FETH2_RST);
+
+	iounmap(bcsr);
+
+	init_ioports();
+
+	/* Enable external IRQs */
+	clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_siumcr, 0x0c000000);
+
+	pq2_init_pci();
+
+	if (ppc_md.progress)
+		ppc_md.progress("pq2fads_setup_arch(), finish", 0);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init pq2fads_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "fsl,pq2fads");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	if (!machine_is(pq2fads))
+		return 0;
+
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+device_initcall(declare_of_platform_devices);
+
+define_machine(pq2fads)
+{
+	.name = "Freescale PQ2FADS",
+	.probe = pq2fads_probe,
+	.setup_arch = pq2fads_setup_arch,
+	.init_IRQ = pq2fads_pic_init,
+	.get_irq = cpm2_get_irq,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = pq2_restart,
+	.progress = udbg_progress,
+};
-- 
1.5.3.1