* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-09-20 12:41 Josh Boyer
2007-09-21 1:53 ` Paul Mackerras
0 siblings, 1 reply; 11+ messages in thread
From: Josh Boyer @ 2007-09-20 12:41 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please pull from
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc.git for-2.6.24
to receive the following updates:
David Gibson (1):
[POWERPC] Cleanups for physmap_of.c (v2)
Hollis Blanchard (1):
[POWERPC] 4xx: Implement udbg_getc() for 440
Josh Boyer (5):
[POWERPC] cuimage for Bamboo board
[POWERPC] Make partitions optional in physmap_of
[POWERPC] 4xx: Convert Walnut flash mappings to new binding
[POWERPC] 4xx: Convert Seqouia flash mappings to new binding
[POWERPC] Update PowerPC 4xx entry in MAINTAINERS
Valentine Barshak (3):
[POWERPC] Add 64-bit resources support to pci_iomap
[POWERPC] 4xx: Fix Bamboo MAL0 dts entry.
[POWERPC] 4xx: Fix Sequoia MAL0 and EMAC dts entries.
MAINTAINERS | 3 +
arch/powerpc/boot/44x.h | 2 +-
arch/powerpc/boot/Makefile | 4 +-
arch/powerpc/boot/bamboo.c | 8 +-
arch/powerpc/boot/cuboot-bamboo.c | 30 +++++
arch/powerpc/boot/dts/bamboo.dts | 2 +-
arch/powerpc/boot/dts/sequoia.dts | 46 +++++--
arch/powerpc/boot/dts/walnut.dts | 17 ++-
arch/powerpc/boot/treeboot-bamboo.c | 22 +++-
arch/powerpc/configs/sequoia_defconfig | 91 +++++++++++++-
arch/powerpc/kernel/iomap.c | 4 +-
arch/powerpc/kernel/udbg_16550.c | 11 ++
drivers/mtd/maps/physmap_of.c | 222 ++++++++++++++------------------
13 files changed, 304 insertions(+), 158 deletions(-)
create mode 100644 arch/powerpc/boot/cuboot-bamboo.c
^ permalink raw reply [flat|nested] 11+ messages in thread* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-11-19 21:26 Josh Boyer
0 siblings, 0 replies; 11+ messages in thread
From: Josh Boyer @ 2007-11-19 21:26 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
to pick up a few bug fixes for 2.6.24. The AC97 change is fairly
harmless and is required to get AC97 working on Virtex boards.
josh
Joachim Foerster (1):
[POWERPC] Xilinx: Register AC97 Controller Reference with the platform bus
Jon Loeliger (1):
[POWERPC] 4xx: Replace #includes of asm/of_platform.h with linux/of_platfo
Josh Boyer (1):
[POWERPC] 4xx: Use virtual PVR value to init FPU on arch/ppc 440EP
Roel Kluin (1):
[POWERPC] 4xx: balance ioremap/ioumap calls for Yucca
Valentine Barshak (1):
[POWERPC] 4xx: UIC add mask_ack callback
arch/powerpc/platforms/40x/walnut.c | 3 ++-
arch/powerpc/platforms/44x/bamboo.c | 3 ++-
arch/powerpc/platforms/44x/ebony.c | 3 ++-
arch/powerpc/platforms/44x/sequoia.c | 3 ++-
arch/powerpc/sysdev/uic.c | 18 +++++++++++++++++-
arch/ppc/kernel/setup.c | 7 +++++++
arch/ppc/platforms/4xx/yucca.c | 1 +
arch/ppc/syslib/virtex_devices.c | 31 +++++++++++++++++++++++++++++++
8 files changed, 64 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-11-01 13:10 Josh Boyer
2007-11-01 14:54 ` Steven A. Falco
0 siblings, 1 reply; 11+ messages in thread
From: Josh Boyer @ 2007-11-01 13:10 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
to pick up a few items for 2.6.24. Mostly bugfixes, but also some
documentation updates and a few bootwrapper changes. Particularly important
is the TLB flushing fix from Ben.
josh
Benjamin Herrenschmidt (2):
[POWERPC] 4xx: Fix 4xx flush_tlb_page()
[POWERPC] 4xx: Deal with 44x virtually tagged icache
Grant Likely (5):
[POWERPC] bootwrapper: Allow wrapper script to execute verbosely
[POWERPC] bootwrapper: Bail from script if any command fails
[POWERPC] Device tree bindings for Xilinx devices
[POWERPC] Uartlite: speed up console output
[POWERPC] ppc405 Fix arithmatic rollover bug when memory size under 16M
Roel Kluin (1):
[POWERPC] allocation fix in ppc/platforms/4xx/luan.c
Steven A. Falco (1):
[POWERPC] 4xx: Fix Walnut DTS interrupt property
Valentine Barshak (1):
[POWERPC] 4xx: Workaround for the 440EP(x)/GR(x) processors identical PVR
Documentation/powerpc/booting-without-of.txt | 261 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/walnut.dts | 4 +-
arch/powerpc/boot/wrapper | 32 ++--
arch/powerpc/kernel/cputable.c | 36 +++-
arch/powerpc/kernel/entry_32.S | 23 +++
arch/powerpc/kernel/misc_32.S | 32 +++-
arch/powerpc/kernel/prom.c | 12 ++
arch/powerpc/mm/40x_mmu.c | 17 +-
arch/powerpc/mm/44x_mmu.c | 1 +
arch/powerpc/mm/fault.c | 2 +-
arch/powerpc/mm/mmu_decl.h | 4 +-
arch/ppc/kernel/entry.S | 23 +++
arch/ppc/kernel/misc.S | 31 +++-
arch/ppc/mm/44x_mmu.c | 1 +
arch/ppc/mm/4xx_mmu.c | 17 +-
arch/ppc/mm/fault.c | 2 +-
arch/ppc/mm/mmu_decl.h | 4 +-
arch/ppc/platforms/4xx/ebony.c | 2 +-
arch/ppc/platforms/4xx/luan.c | 7 +-
arch/ppc/platforms/4xx/ocotea.c | 2 +-
arch/ppc/platforms/4xx/taishan.c | 2 +-
drivers/serial/uartlite.c | 10 +-
include/asm-powerpc/pgtable-ppc32.h | 13 ++
include/asm-powerpc/tlbflush.h | 12 +-
24 files changed, 472 insertions(+), 78 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Please pull from 'for-2.6.24' branch of 4xx tree
2007-11-01 13:10 Josh Boyer
@ 2007-11-01 14:54 ` Steven A. Falco
2007-11-01 14:57 ` Josh Boyer
0 siblings, 1 reply; 11+ messages in thread
From: Steven A. Falco @ 2007-11-01 14:54 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
Is this something anyone can do? I tried:
git pull
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
for-2.6.24
but it asks me for a password. I'd like to be able to follow your
development branch, so I can contribute patches where appropriate.
Steve
Josh Boyer wrote:
> Hi Paul,
>
> Please pull from:
>
> master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
>
> to pick up a few items for 2.6.24. Mostly bugfixes, but also some
> documentation updates and a few bootwrapper changes. Particularly important
> is the TLB flushing fix from Ben.
>
> josh
>
> Benjamin Herrenschmidt (2):
> [POWERPC] 4xx: Fix 4xx flush_tlb_page()
> [POWERPC] 4xx: Deal with 44x virtually tagged icache
>
> Grant Likely (5):
> [POWERPC] bootwrapper: Allow wrapper script to execute verbosely
> [POWERPC] bootwrapper: Bail from script if any command fails
> [POWERPC] Device tree bindings for Xilinx devices
> [POWERPC] Uartlite: speed up console output
> [POWERPC] ppc405 Fix arithmatic rollover bug when memory size under 16M
>
> Roel Kluin (1):
> [POWERPC] allocation fix in ppc/platforms/4xx/luan.c
>
> Steven A. Falco (1):
> [POWERPC] 4xx: Fix Walnut DTS interrupt property
>
> Valentine Barshak (1):
> [POWERPC] 4xx: Workaround for the 440EP(x)/GR(x) processors identical PVR
>
> Documentation/powerpc/booting-without-of.txt | 261 ++++++++++++++++++++++++++
> arch/powerpc/boot/dts/walnut.dts | 4 +-
> arch/powerpc/boot/wrapper | 32 ++--
> arch/powerpc/kernel/cputable.c | 36 +++-
> arch/powerpc/kernel/entry_32.S | 23 +++
> arch/powerpc/kernel/misc_32.S | 32 +++-
> arch/powerpc/kernel/prom.c | 12 ++
> arch/powerpc/mm/40x_mmu.c | 17 +-
> arch/powerpc/mm/44x_mmu.c | 1 +
> arch/powerpc/mm/fault.c | 2 +-
> arch/powerpc/mm/mmu_decl.h | 4 +-
> arch/ppc/kernel/entry.S | 23 +++
> arch/ppc/kernel/misc.S | 31 +++-
> arch/ppc/mm/44x_mmu.c | 1 +
> arch/ppc/mm/4xx_mmu.c | 17 +-
> arch/ppc/mm/fault.c | 2 +-
> arch/ppc/mm/mmu_decl.h | 4 +-
> arch/ppc/platforms/4xx/ebony.c | 2 +-
> arch/ppc/platforms/4xx/luan.c | 7 +-
> arch/ppc/platforms/4xx/ocotea.c | 2 +-
> arch/ppc/platforms/4xx/taishan.c | 2 +-
> drivers/serial/uartlite.c | 10 +-
> include/asm-powerpc/pgtable-ppc32.h | 13 ++
> include/asm-powerpc/tlbflush.h | 12 +-
> 24 files changed, 472 insertions(+), 78 deletions(-)
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
>
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Please pull from 'for-2.6.24' branch of 4xx tree
2007-11-01 14:54 ` Steven A. Falco
@ 2007-11-01 14:57 ` Josh Boyer
0 siblings, 0 replies; 11+ messages in thread
From: Josh Boyer @ 2007-11-01 14:57 UTC (permalink / raw)
To: Steven A. Falco; +Cc: linuxppc-dev
On Thu, 01 Nov 2007 10:54:15 -0400
"Steven A. Falco" <sfalco@harris.com> wrote:
> Is this something anyone can do? I tried:
>
> git pull
> master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
> for-2.6.24
>
> but it asks me for a password. I'd like to be able to follow your
> development branch, so I can contribute patches where appropriate.
Ah. No, you'd have to have an account on master.kernel.org for that
specific pull request to work. Anonymous pulls should work with:
git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
as the URL instead.
josh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-10-19 21:31 Josh Boyer
2007-10-23 12:06 ` Josh Boyer
0 siblings, 1 reply; 11+ messages in thread
From: Josh Boyer @ 2007-10-19 21:31 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please pull from
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
to pick up a handful of fixes for 4xx. These are mostly to enable the
ibm_newemac driver for the various boards. Since a few patches to the
driver are needed from Linus' tree, the branch is based off of his
latest tree as of this morning.
josh
Josh Boyer (4):
[POWERPC] 4xx: Enable EMAC on the PPC 440GP Ebony board
[POWERPC] 4xx: Fix timebase clock selection on Walnut
[POWERPC] 4xx: Enable EMAC for PPC405 Walnut board
[POWERPC] 4xx: Enable EMAC on Bamboo board
Valentine Barshak (3):
[POWERPC] 4xx: Add RGMII support for Sequoia 440EPx
[POWERPC] 4xx: Enable NEW EMAC support for Sequoia 440EPx.
[POWERPC] 4xx: Split early debug output and early boot console for 44x
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Please pull from 'for-2.6.24' branch of 4xx tree
2007-10-19 21:31 Josh Boyer
@ 2007-10-23 12:06 ` Josh Boyer
0 siblings, 0 replies; 11+ messages in thread
From: Josh Boyer @ 2007-10-23 12:06 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
On Fri, 19 Oct 2007 16:31:19 -0500
Josh Boyer <jwboyer@linux.vnet.ibm.com> wrote:
> Hi Paul,
>
> Please pull from
>
> master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
>
> to pick up a handful of fixes for 4xx. These are mostly to enable the
> ibm_newemac driver for the various boards. Since a few patches to the
> driver are needed from Linus' tree, the branch is based off of his
> latest tree as of this morning.
Ping on this? I'd like to get these into Linus' tree before the merge
window closes so we have somewhat usable 4xx support in arch/powerpc.
josh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-10-02 12:54 Josh Boyer
2007-10-03 13:42 ` Josh Boyer
0 siblings, 1 reply; 11+ messages in thread
From: Josh Boyer @ 2007-10-02 12:54 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please pull from
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
to pick up a handful of new items for 2.6.24. Initial Virtex support
from Grant, some cpu setup functions for 4xx from Valentine, a compile
fix for the Walnut wrapper, and a small number of arch/ppc fixes for
Xilinx boards.
Grant Likely (15):
[POWERPC] Virtex: Add uartlite bootwrapper driver
[POWERPC] Virtex: Add Kconfig macros for Xilinx Virtex board support
[POWERPC] Virtex: add xilinx interrupt controller driver
[POWERPC] Virtex: Add generic Xilinx Virtex board support
[POWERPC] Add PowerPC Xilinx Virtex entry to maintainers
[POWERPC] Uartlite: Fix reg io to access documented register size
[POWERPC] Uartlite: change name of ports to ulite_ports
[POWERPC] Uartlite: Add macro for uartlite device name
[POWERPC] Uartlite: Separate the bus binding from the driver proper
[POWERPC] Uartlite: Comment block tidy
[POWERPC] Uartlite: Add of-platform-bus binding
[POWERPC] Uartlite: Let the console be initialized earlier
[POWERPC] Uartlite: Flush RX fifo in bootwrapper
[POWERPC] XilinxFB: Move xilinxfb_platform_data definition to a shared hea
[POWERPC] Setup default eth addr in embed_config for Xilinx Virtex platfor
Josh Boyer (2):
[POWERPC] 4xx: Fix Walnut wrapper compile errors
[POWERPC] Add treeImage to .gitignore
Valentine Barshak (3):
[POWERPC] 4xx: Introduce cpu_setup functionality to 44x platform
[POWERPC] 4xx: Move 440EP(x) FPU setup from head_44x to cpu_setup_4xx
[POWERPC] 4xx: 440EPx/GRx incorrect write to DDR SDRAM errata workaround
MAINTAINERS | 7 +
arch/powerpc/boot/.gitignore | 1 +
arch/powerpc/boot/Makefile | 3 +-
arch/powerpc/boot/ops.h | 1 +
arch/powerpc/boot/serial.c | 2 +
arch/powerpc/boot/uartlite.c | 64 +++++++
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/cpu_setup_44x.S | 56 ++++++
arch/powerpc/kernel/cputable.c | 22 ++-
arch/powerpc/kernel/head_44x.S | 10 -
arch/powerpc/platforms/40x/Kconfig | 38 +++--
arch/powerpc/platforms/40x/Makefile | 1 +
arch/powerpc/platforms/40x/virtex.c | 50 ++++++
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/xilinx_intc.c | 151 ++++++++++++++++
arch/ppc/boot/simple/embed_config.c | 8 +
arch/ppc/boot/simple/misc-embedded.c | 4 +-
arch/ppc/boot/simple/uartlite_tty.c | 8 +
arch/ppc/syslib/virtex_devices.c | 2 +-
arch/ppc/syslib/virtex_devices.h | 8 +-
drivers/serial/uartlite.c | 318 +++++++++++++++++++++++++++-------
drivers/video/xilinxfb.c | 2 +-
include/asm-powerpc/xilinx_intc.h | 20 ++
include/linux/xilinxfb.h | 23 +++
24 files changed, 698 insertions(+), 103 deletions(-)
create mode 100644 arch/powerpc/boot/uartlite.c
create mode 100644 arch/powerpc/kernel/cpu_setup_44x.S
create mode 100644 arch/powerpc/platforms/40x/virtex.c
create mode 100644 arch/powerpc/sysdev/xilinx_intc.c
create mode 100644 include/asm-powerpc/xilinx_intc.h
create mode 100644 include/linux/xilinxfb.h
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Please pull from 'for-2.6.24' branch of 4xx tree
2007-10-02 12:54 Josh Boyer
@ 2007-10-03 13:42 ` Josh Boyer
0 siblings, 0 replies; 11+ messages in thread
From: Josh Boyer @ 2007-10-03 13:42 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
On Tue, 2 Oct 2007 07:54:20 -0500
Josh Boyer <jwboyer@linux.vnet.ibm.com> wrote:
> Hi Paul,
>
> Please pull from
>
> master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git for-2.6.24
>
> to pick up a handful of new items for 2.6.24. Initial Virtex support
> from Grant, some cpu setup functions for 4xx from Valentine, a compile
> fix for the Walnut wrapper, and a small number of arch/ppc fixes for
> Xilinx boards.
I've rebased my branch on top of your latest tree and added the
following two additional commits:
Grant Likely (2):
[POWERPC] Uartlite: Add macros for register names
[POWERPC] Uartlite: Revert register io access changes
Please pull
thx,
josh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Please pull from 'for-2.6.24' branch of 4xx tree
@ 2007-09-07 13:16 Josh Boyer
0 siblings, 0 replies; 11+ messages in thread
From: Josh Boyer @ 2007-09-07 13:16 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Hi Paul,
Please do
git pull \
git://git.infradead.org/users/jwboyer/powerpc.git for-2.6.24
It contains the latest 4xx patches for 2.6.24. Support for 440EPx and
405GP boards are added, a bugfix for 440EP, and a small cleanup of some
DTS files.
josh
arch/powerpc/boot/4xx.c | 108 +++++
arch/powerpc/boot/4xx.h | 1 +
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/cuboot-sequoia.c | 56 +++
arch/powerpc/boot/dcr.h | 5 +
arch/powerpc/boot/dts/ebony.dts | 4 -
arch/powerpc/boot/dts/holly.dts | 4 -
arch/powerpc/boot/dts/kuroboxHD.dts | 3 -
arch/powerpc/boot/dts/kuroboxHG.dts | 3 -
arch/powerpc/boot/dts/prpmc2800.dts | 4 -
arch/powerpc/boot/dts/sequoia.dts | 286 ++++++++++++
arch/powerpc/boot/dts/walnut.dts | 183 ++++++++
arch/powerpc/boot/treeboot-walnut.c | 131 ++++++
arch/powerpc/configs/sequoia_defconfig | 776 ++++++++++++++++++++++++++++++++
arch/powerpc/configs/walnut_defconfig | 773 +++++++++++++++++++++++++++++++
arch/powerpc/kernel/cputable.c | 18 +
arch/powerpc/kernel/head_44x.S | 2 +-
arch/powerpc/platforms/40x/Kconfig | 14 +-
arch/powerpc/platforms/40x/Makefile | 2 +-
arch/powerpc/platforms/40x/walnut.c | 68 +++
arch/powerpc/platforms/44x/Kconfig | 17 +-
arch/powerpc/platforms/44x/Makefile | 1 +
arch/powerpc/platforms/44x/bamboo.c | 2 +-
arch/powerpc/platforms/44x/sequoia.c | 66 +++
arch/powerpc/platforms/Kconfig | 2 +-
arch/powerpc/platforms/Makefile | 2 +-
26 files changed, 2504 insertions(+), 32 deletions(-)
create mode 100644 arch/powerpc/boot/cuboot-sequoia.c
create mode 100644 arch/powerpc/boot/dts/sequoia.dts
create mode 100644 arch/powerpc/boot/dts/walnut.dts
create mode 100644 arch/powerpc/boot/treeboot-walnut.c
create mode 100644 arch/powerpc/configs/sequoia_defconfig
create mode 100644 arch/powerpc/configs/walnut_defconfig
create mode 100644 arch/powerpc/platforms/40x/walnut.c
create mode 100644 arch/powerpc/platforms/44x/sequoia.c
Josh Boyer (6):
[POWERPC] Remove dtc build cruft from DTS files
[POWERPC] Fix bus probe on Bamboo board
[POWERPC] Walnut DTS
[POWERPC] Walnut defconfig
[POWERPC] Walnut board support
[POWERPC] Walnut zImage wrapper
Valentine Barshak (4):
[POWERPC] PowerPC 440EPx: Sequoia device tree
[POWERPC] PowerPC 440EPx: Sequoia defconfig
[POWERPC] PowerPC 440EPx: Sequoia board support
[POWERPC] PowerPC 440EPx: Sequoia bootwrapper
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2007-11-19 21:26 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-20 12:41 Please pull from 'for-2.6.24' branch of 4xx tree Josh Boyer
2007-09-21 1:53 ` Paul Mackerras
-- strict thread matches above, loose matches on Subject: below --
2007-11-19 21:26 Josh Boyer
2007-11-01 13:10 Josh Boyer
2007-11-01 14:54 ` Steven A. Falco
2007-11-01 14:57 ` Josh Boyer
2007-10-19 21:31 Josh Boyer
2007-10-23 12:06 ` Josh Boyer
2007-10-02 12:54 Josh Boyer
2007-10-03 13:42 ` Josh Boyer
2007-09-07 13:16 Josh Boyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).