linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 5/7] [POWERPC] mpc8568mds: update dts to be able to use UCCs
Date: Tue, 25 Sep 2007 18:34:55 +0400	[thread overview]
Message-ID: <20070925143455.GE5323@localhost.localdomain> (raw)
In-Reply-To: <20070925143126.GA30013@localhost.localdomain>

1. UCC1's RX_DV pin is 16, not 15;
2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent
   u-boot also using 0x7.
3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup.
4. tx-clock should be CLK16 (GE125, PB31);
5. phy-connection-type is RGMII-ID;

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc8568mds.dts |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index c472a4b..1d082fb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -95,10 +95,10 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			phy0: ethernet-phy@0 {
+			phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <0>;
+				reg = <7>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
@@ -286,7 +286,7 @@
 					4  1a  2  0  2  0 	/* RxD7 */
 					4  0b  1  0  2  0 	/* TX_EN */
 					4  18  1  0  2  0 	/* TX_ER */
-					4  0f  2  0  2  0 	/* RX_DV */
+					4  10  2  0  2  0 	/* RX_DV */
 					4  1e  2  0  2  0 	/* RX_ER */
 					4  11  2  0  2  0 	/* RX_CLK */
 					4  13  1  0  2  0 	/* GTX_CLK */
@@ -377,10 +377,10 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
-			tx-clock = <19>;
-			phy-handle = <&qe_phy0>;
-			phy-connection-type = "gmii";
+			tx-clock = <20>;
 			pio-handle = <&pio1>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
 		};
 
 		ucc@3000 {
@@ -399,10 +399,10 @@
 			mac-address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock = <0>;
-			tx-clock = <14>;
-			phy-handle = <&qe_phy1>;
-			phy-connection-type = "gmii";
+			tx-clock = <20>;
 			pio-handle = <&pio2>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
 		};
 
 		mdio@2120 {
@@ -414,10 +414,10 @@
 
 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
-			qe_phy0: ethernet-phy@00 {
+			qe_phy0: ethernet-phy@07 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <0>;
+				reg = <7>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@01 {
-- 
1.5.0.6

  parent reply	other threads:[~2007-09-25 14:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-25 14:31 MPC85xx_MDS: Patches to support QE, UCCs and SPI Anton Vorontsov
2007-09-25 14:34 ` [PATCH 1/7] [POWERPC] mpc85xx_mds: select QUICC_ENGINE Anton Vorontsov
2007-09-25 14:34 ` [PATCH 2/7] [POWERPC] Fix QEIC->MPIC cascading Anton Vorontsov
2007-10-01 23:14   ` Benjamin Herrenschmidt
2007-10-02 12:20     ` Anton Vorontsov
2007-10-02 22:02       ` Benjamin Herrenschmidt
2007-10-04 13:04         ` [RFC][PATCH][POWERPC] QEIC: Implement pluggable handlers, fix MPIC cascading Anton Vorontsov
2007-10-04 22:05           ` Benjamin Herrenschmidt
2007-10-05  5:18             ` Kumar Gala
2007-10-05 12:30               ` Anton Vorontsov
2007-09-25 14:34 ` [PATCH 3/7] [POWERPC] QEIC: implement low+high multiplexed IRQ chained handler Anton Vorontsov
2007-09-25 14:34 ` [PATCH 4/7] [POWERPC] QE pario: support for MPC85xx layout Anton Vorontsov
2007-09-25 16:41   ` Kim Phillips
2007-10-05  5:15   ` Kumar Gala
2007-09-25 14:34 ` Anton Vorontsov [this message]
2007-09-25 14:35 ` [PATCH 6/7] [POWERPC] mpc85xx_mds: reset UCC ethernet properly Anton Vorontsov
2007-09-25 14:35 ` [PATCH 7/7] [POWERPC][SPI] spi_mpc83xx: allow use on MPC85xx Anton Vorontsov
2007-09-25 14:48   ` Peter Korsgaard
2007-09-25 15:02     ` [PATCH v2 " Anton Vorontsov
2007-09-25 15:04   ` [spi-devel-general] [PATCH " Kumar Gala
2007-09-25 15:18     ` Anton Vorontsov
2007-09-25 16:58       ` David Brownell
2007-09-26  4:00         ` Kumar Gala
2007-09-26 13:15           ` [PATCH 7/7] [POWERPC][SPI] spi_mpc83xx: allow use on any processors with QUICC Engine Anton Vorontsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070925143455.GE5323@localhost.localdomain \
    --to=avorontsov@ru.mvista.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).