From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from buildserver.ru.mvista.com (unknown [85.21.88.6]) by ozlabs.org (Postfix) with ESMTP id CD031DDEE0 for ; Wed, 26 Sep 2007 00:33:05 +1000 (EST) Received: from localhost (unknown [10.150.0.9]) by buildserver.ru.mvista.com (Postfix) with ESMTP id 4F84C8810 for ; Tue, 25 Sep 2007 19:33:04 +0500 (SAMST) Date: Tue, 25 Sep 2007 18:34:55 +0400 From: Anton Vorontsov To: linuxppc-dev@ozlabs.org Subject: [PATCH 5/7] [POWERPC] mpc8568mds: update dts to be able to use UCCs Message-ID: <20070925143455.GE5323@localhost.localdomain> References: <20070925143126.GA30013@localhost.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 In-Reply-To: <20070925143126.GA30013@localhost.localdomain> List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , 1. UCC1's RX_DV pin is 16, not 15; 2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent u-boot also using 0x7. 3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup. 4. tx-clock should be CLK16 (GE125, PB31); 5. phy-connection-type is RGMII-ID; Signed-off-by: Anton Vorontsov --- arch/powerpc/boot/dts/mpc8568mds.dts | 22 +++++++++++----------- 1 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index c472a4b..1d082fb 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -95,10 +95,10 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { @@ -286,7 +286,7 @@ 4 1a 2 0 2 0 /* RxD7 */ 4 0b 1 0 2 0 /* TX_EN */ 4 18 1 0 2 0 /* TX_ER */ - 4 0f 2 0 2 0 /* RX_DV */ + 4 10 2 0 2 0 /* RX_DV */ 4 1e 2 0 2 0 /* RX_ER */ 4 11 2 0 2 0 /* RX_CLK */ 4 13 1 0 2 0 /* GTX_CLK */ @@ -377,10 +377,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <19>; - phy-handle = <&qe_phy0>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; ucc@3000 { @@ -399,10 +399,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <14>; - phy-handle = <&qe_phy1>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; }; mdio@2120 { @@ -414,10 +414,10 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - qe_phy0: ethernet-phy@00 { + qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { -- 1.5.0.6