From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Timur Tabi <timur@freescale.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH v3] qe: miscellaneous code improvements and fixes to the QE library
Date: Wed, 3 Oct 2007 17:30:32 +0400 [thread overview]
Message-ID: <20071003133032.GA2417@localhost.localdomain> (raw)
In-Reply-To: <11903212461510-git-send-email-timur@freescale.com>
Hi Timur,
On Thu, Sep 20, 2007 at 03:47:26PM -0500, Timur Tabi wrote:
> This patch makes numerous miscellaneous code improvements to the QE library.
...and also breaks MPC8568E-MDS. ;-) Board hangs just after ip-config stuff.
Commit 589ffa1c520355e37d5868 in galak/powerpc.git.
Unfortunately it isn't split, thus it will take time to track faulty bit.
But so far... maybe you have any ideas?
...
serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 42) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: module loaded
Gianfar MII Bus: probed
eth0: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:00:fd
eth0: Running with NAPI enabled
eth0: 256/256 RX/TX BD ring size
eth1: Gianfar Ethernet Controller Version 1.2, 00:e0:0c:00:01:fd
eth1: Running with NAPI enabled
eth1: 256/256 RX/TX BD ring size
UCC Ethernet Controller MII Bus: probed
ucc_geth: QE UCC Gigabit Ethernet Controller
ucc_geth: UCC1 at 0xe0082000 (irq = 32)
ucc_geth: UCC2 at 0xe0083000 (irq = 33)
PCI: Enabling device 0001:02:00.0 (0000 -> 0003)
sky2 0001:02:00.0: v1.18 addr 0xa0000000 irq 18 Yukon-EC (0xb6) rev 1
sky2 eth4: addr 00:00:5a:71:75:fe
Marvell 88E1101: Registered new driver
Marvell 88E1112: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
netconsole: not configured, aborting
i2c /dev entries driver
rtc-ds1374 0-0068: rtc core: registered rtc-ds1374 as rtc0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
rtc-ds1374 0-0068: setting the system clock to 2007-01-02 22:23:42 (1167776622)
sky2 eth4: enabling interface
Sending DHCP requests .<6>PHY: e0024520:02 - Link is Up - 100/Full
PHY: e0024520:03 - Link is Up - 100/Full
PHY: e0024520:01 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 10.0.0.2, my address is 10.0.0.99
Thanks,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2007-10-03 13:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-20 20:47 [PATCH v3] qe: miscellaneous code improvements and fixes to the QE library Timur Tabi
2007-09-20 21:30 ` Timur Tabi
2007-09-20 21:44 ` Kumar Gala
2007-10-03 13:30 ` Anton Vorontsov [this message]
2007-10-03 14:16 ` Timur Tabi
2007-10-03 14:34 ` Anton Vorontsov
2007-10-03 14:39 ` Timur Tabi
2007-10-03 14:43 ` Kumar Gala
2007-10-03 15:01 ` Timur Tabi
2007-10-03 16:29 ` Anton Vorontsov
2007-10-03 16:33 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071003133032.GA2417@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).