* [PATCH v4 9/9] add MPC837x MDS board default device tree
@ 2007-10-15 14:56 Li Yang
2007-10-16 1:15 ` David Gibson
2007-10-17 13:54 ` Kumar Gala
0 siblings, 2 replies; 4+ messages in thread
From: Li Yang @ 2007-10-15 14:56 UTC (permalink / raw)
To: galak, paulus, linuxppc-dev; +Cc: Li Yang
Signed-off-by: Li Yang <leoli@freescale.com>
---
arch/powerpc/boot/dts/mpc8377_mds.dts | 281 +++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8378_mds.dts | 263 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8379_mds.dts | 299 +++++++++++++++++++++++++++++++++
3 files changed, 843 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 0000000..d0bd326
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -0,0 +1,281 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "fsl,mpc8377emds";
+ compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,837x@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; // 512MB at 0
+ };
+
+ soc837x@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ spi@7000 {
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = < &ipic >;
+ mode = <0>;
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
+ phy_type = "utmi_wide";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8 21 8 22 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy2 >;
+ };
+
+ ethernet@25000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <23 8 24 8 25 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy3 >;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ crypto@30000 {
+ model = "SEC3";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = < &ipic >;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <000009fe>;
+ descriptor-types-mask = <03ab0ebf>;
+ };
+
+ sdhc@2e000 {
+ model = "eSDHC";
+ compatible = "fsl,esdhc";
+ reg = <2e000 1000>;
+ interrupts = <2a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sata@18000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <18000 1000>;
+ interrupts = <2c 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes1 >;
+ };
+
+ sata@19000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <19000 1000>;
+ interrupts = <2d 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes1 >;
+ };
+
+ serdes1:serdes@e3000 {
+ compatible = "fsl,serdes";
+ reg = <e3000 100>;
+ vdd-1v;
+ protocol = "sata";
+ clock = <d#100>;
+ };
+
+ serdes2:serdes@e3100 {
+ compatible = "fsl,serdes";
+ reg = <e3100 100>;
+ vdd-1v;
+ protocol = "pcie";
+ clock = <d#100>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ };
+ };
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc83xx-pci", "83xx";
+ device_type = "pci";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
new file mode 100644
index 0000000..9f31e09
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -0,0 +1,263 @@
+/*
+ * MPC8378E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "fsl,mpc8378emds";
+ compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,837x@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; // 512MB at 0
+ };
+
+ soc837x@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ spi@7000 {
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = < &ipic >;
+ mode = <0>;
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
+ phy_type = "utmi_wide";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8 21 8 22 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy2 >;
+ };
+
+ ethernet@25000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <23 8 24 8 25 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy3 >;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ crypto@30000 {
+ model = "SEC3";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = < &ipic >;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <000009fe>;
+ descriptor-types-mask = <03ab0ebf>;
+ };
+
+ sdhc@2e000 {
+ model = "eSDHC";
+ compatible = "fsl,esdhc";
+ reg = <2e000 1000>;
+ interrupts = <2a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ serdes1:serdes@e3000 {
+ compatible = "fsl,serdes";
+ reg = <e3000 100>;
+ vdd-1v;
+ protocol = "sgmii";
+ clock = <d#100>;
+ };
+
+ serdes2:serdes@e3100 {
+ compatible = "fsl,serdes";
+ reg = <e3100 100>;
+ vdd-1v;
+ protocol = "pcie";
+ clock = <d#100>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ };
+ };
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc83xx-pci", "83xx";
+ device_type = "pci";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
new file mode 100644
index 0000000..5510e18
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -0,0 +1,299 @@
+/*
+ * MPC8379E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "fsl,mpc8379emds";
+ compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,837x@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; // 512MB at 0
+ };
+
+ soc837x@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = < &ipic >;
+ dfsrr;
+ };
+
+ spi@7000 {
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = < &ipic >;
+ mode = <0>;
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
+ phy_type = "utmi_wide";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8 21 8 22 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy2 >;
+ };
+
+ ethernet@25000 {
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <23 8 24 8 25 8>;
+ phy-connection-type = "mii";
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy3 >;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ crypto@30000 {
+ model = "SEC3";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = < &ipic >;
+ /* Rev. 3.0 geometry */
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <000009fe>;
+ descriptor-types-mask = <03ab0ebf>;
+ };
+
+ sdhc@2e000 {
+ model = "eSDHC";
+ compatible = "fsl,esdhc";
+ reg = <2e000 1000>;
+ interrupts = <2a 8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sata@18000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <18000 1000>;
+ interrupts = <2c 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes1 >;
+ };
+
+ sata@19000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <19000 1000>;
+ interrupts = <2d 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes1 >;
+ };
+
+ sata@1a000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <1a000 1000>;
+ interrupts = <2e 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes2 >;
+ };
+
+ sata@1b000 {
+ model = "SATA-300";
+ compatible = "fsl,mpc8379-sata";
+ reg = <1b000 1000>;
+ interrupts = <2f 8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &serdes2 >;
+ };
+
+ serdes1:serdes@e3000 {
+ compatible = "fsl,serdes";
+ reg = <e3000 100>;
+ vdd-1v;
+ protocol = "sata";
+ clock = <d#100>;
+ };
+
+ serdes2:serdes@e3100 {
+ compatible = "fsl,serdes";
+ reg = <e3100 100>;
+ vdd-1v;
+ protocol = "sata";
+ clock = <d#100>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ compatible = "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ };
+ };
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc83xx-pci", "83xx";
+ device_type = "pci";
+ };
+};
--
1.5.3.2.104.g41ef
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v4 9/9] add MPC837x MDS board default device tree
2007-10-15 14:56 [PATCH v4 9/9] add MPC837x MDS board default device tree Li Yang
@ 2007-10-16 1:15 ` David Gibson
2007-10-17 13:54 ` Kumar Gala
1 sibling, 0 replies; 4+ messages in thread
From: David Gibson @ 2007-10-16 1:15 UTC (permalink / raw)
To: Li Yang; +Cc: linuxppc-dev, paulus
On Mon, Oct 15, 2007 at 10:56:50PM +0800, Li Yang wrote:
> Signed-off-by: Li Yang <leoli@freescale.com>
[snip]
> + mdio@24520 {
> + device_type = "mdio";
> + compatible = "gianfar";
> + reg = <24520 20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy2: ethernet-phy@2 {
> + interrupt-parent = < &ipic >;
> + interrupts = <11 8>;
> + reg = <2>;
> + device_type = "ethernet-phy";
> + };
> + phy3: ethernet-phy@3 {
> + interrupt-parent = < &ipic >;
> + interrupts = <12 8>;
> + reg = <3>;
> + device_type = "ethernet-phy";
> + };
> + };
> +
> + ethernet@24000 {
> + device_type = "network";
> + model = "eTSEC";
> + compatible = "gianfar";
This isn't a problem with *this* patch per se, but we have *got* to
fix that fucked up binding which gives both the mdio and ethernet
devices the same compatible property.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4 9/9] add MPC837x MDS board default device tree
2007-10-15 14:56 [PATCH v4 9/9] add MPC837x MDS board default device tree Li Yang
2007-10-16 1:15 ` David Gibson
@ 2007-10-17 13:54 ` Kumar Gala
2007-10-18 3:36 ` Li Yang-r58472
1 sibling, 1 reply; 4+ messages in thread
From: Kumar Gala @ 2007-10-17 13:54 UTC (permalink / raw)
To: Li Yang; +Cc: linuxppc-dev, paulus
On Oct 15, 2007, at 9:56 AM, Li Yang wrote:
> Signed-off-by: Li Yang <leoli@freescale.com>
> ---
> arch/powerpc/boot/dts/mpc8377_mds.dts | 281 ++++++++++++++++++++++
> +++++++++
> arch/powerpc/boot/dts/mpc8378_mds.dts | 263 ++++++++++++++++++++++
> +++++++
> arch/powerpc/boot/dts/mpc8379_mds.dts | 299 ++++++++++++++++++++++
> +++++++++++
> 3 files changed, 843 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
> create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
> create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
>
> diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/
> boot/dts/mpc8377_mds.dts
> new file mode 100644
> index 0000000..d0bd326
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
> @@ -0,0 +1,281 @@
> +/*
> + * MPC8377E MDS Device Tree Source
> + *
> + * Copyright 2007 Freescale Semiconductor Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +/ {
> + model = "fsl,mpc8377emds";
> + compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + PowerPC,837x@0 {
> + device_type = "cpu";
> + reg = <0>;
> + d-cache-line-size = <20>;
> + i-cache-line-size = <20>;
> + d-cache-size = <8000>; // L1, 32K
> + i-cache-size = <8000>; // L1, 32K
> + timebase-frequency = <0>;
> + bus-frequency = <0>;
> + clock-frequency = <0>;
> + 32-bit;
remove 32-bit.
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <00000000 20000000>; // 512MB at 0
> + };
> +
> + soc837x@e0000000 {
make this just 'soc@e0000000'
> + #address-cells = <1>;
> + #size-cells = <1>;
> + device_type = "soc";
> + ranges = <0 e0000000 00100000>;
> + reg = <e0000000 00000200>;
> + bus-frequency = <0>;
> +
> +
> + i2c@3000 {
> + compatible = "fsl-i2c";
> + reg = <3000 100>;
> + interrupts = <e 8>;
> + interrupt-parent = < &ipic >;
> + dfsrr;
add #address-cells & #size-cells to i2c and device_type = "i2c" (Yes
I know there is discussion about this however the code still expects
it to be here for things to work properly).
> + };
> +
> + i2c@3100 {
> + compatible = "fsl-i2c";
> + reg = <3100 100>;
> + interrupts = <f 8>;
> + interrupt-parent = < &ipic >;
> + dfsrr;
ditto.
> + };
> +
> +
[snip]
> + serial@4500 {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <4500 100>;
> + clock-frequency = <0>;
> + interrupts = <9 8>;
> + interrupt-parent = < &ipic >;
> + };
> +
> + serial@4600 {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <4600 100>;
> + clock-frequency = <0>;
> + interrupts = <a 8>;
> + interrupt-parent = < &ipic >;
> + };
> +
> + crypto@30000 {
> + model = "SEC3";
> + compatible = "talitos";
> + reg = <30000 10000>;
> + interrupts = <b 8>;
> + interrupt-parent = < &ipic >;
> + /* Rev. 3.0 geometry */
> + num-channels = <4>;
> + channel-fifo-len = <18>;
> + exec-units-mask = <000009fe>;
> + descriptor-types-mask = <03ab0ebf>;
is this all correct for sec on 837x?
> + };
> +
[snip]
- k
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v4 9/9] add MPC837x MDS board default device tree
2007-10-17 13:54 ` Kumar Gala
@ 2007-10-18 3:36 ` Li Yang-r58472
0 siblings, 0 replies; 4+ messages in thread
From: Li Yang-r58472 @ 2007-10-18 3:36 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev, paulus
> -----Original Message-----
> From: Kumar Gala [mailto:galak@kernel.crashing.org]=20
> Sent: Wednesday, October 17, 2007 9:55 PM
> To: Li Yang-r58472
> Cc: paulus@samba.org; linuxppc-dev@ozlabs.org
> Subject: Re: [PATCH v4 9/9] add MPC837x MDS board default device tree
>=20
>=20
> On Oct 15, 2007, at 9:56 AM, Li Yang wrote:
>=20
> > Signed-off-by: Li Yang <leoli@freescale.com>
> > ---
> > arch/powerpc/boot/dts/mpc8377_mds.dts | 281 ++++++++++++++++++++++
> > +++++++++
> > arch/powerpc/boot/dts/mpc8378_mds.dts | 263 ++++++++++++++++++++++
> > +++++++
> > arch/powerpc/boot/dts/mpc8379_mds.dts | 299 ++++++++++++++++++++++
> > +++++++++++
> > 3 files changed, 843 insertions(+), 0 deletions(-) create mode=20
> > 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
> > create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
> > create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
{snip}
> > + };
> > + };
> > +
> > + memory {
> > + device_type =3D "memory";
> > + reg =3D <00000000 20000000>; // 512MB at 0
> > + };
> > +
> > + soc837x@e0000000 {
>=20
> make this just 'soc@e0000000'
>=20
The current u-boot support uses soc837x. U-boot should be changed first
for soc@e0000000 to work.
- Leo
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-10-18 3:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-15 14:56 [PATCH v4 9/9] add MPC837x MDS board default device tree Li Yang
2007-10-16 1:15 ` David Gibson
2007-10-17 13:54 ` Kumar Gala
2007-10-18 3:36 ` Li Yang-r58472
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).