From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] PowerPC: Add BCM5248 and Marvell 88E1111 PHY support to NEW EMAC.
Date: Tue, 23 Oct 2007 10:20:35 -0500 [thread overview]
Message-ID: <20071023102035.6d35d3fe@weaponx.rchland.ibm.com> (raw)
In-Reply-To: <4713B10B.5000607@garzik.org>
On Mon, 15 Oct 2007 14:27:23 -0400
Jeff Garzik <jeff@garzik.org> wrote:
> Valentine Barshak wrote:
> > This patch adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver.
> > These PHY chips are used on PowerPC 440EPx boards.
> > The PHY code is based on the previous work by Stefan Roese <sr@denx.de>
> >
> > Signed-off-by: Stefan Roese <sr@denx.de>
> > Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
> > ---
> > drivers/net/ibm_newemac/phy.c | 39 +++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 39 insertions(+)
> >
> > --- linux.orig/drivers/net/ibm_newemac/phy.c 2007-06-15 21:45:18.000000000 +0400
> > +++ linux/drivers/net/ibm_newemac/phy.c 2007-06-15 20:45:15.000000000 +0400
> > @@ -306,8 +306,47 @@
> > .ops = &cis8201_phy_ops
> > };
> >
> > +static struct mii_phy_def bcm5248_phy_def = {
> > +
> > + .phy_id = 0x0143bc00,
> > + .phy_id_mask = 0x0ffffff0,
> > + .name = "BCM5248 10/100 SMII Ethernet",
> > + .ops = &generic_phy_ops
> > +};
> > +
> > +static int m88e1111_init(struct mii_phy *phy)
> > +{
> > + printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
> > + phy_write(phy, 0x14, 0x0ce3);
> > + phy_write(phy, 0x18, 0x4101);
> > + phy_write(phy, 0x09, 0x0e00);
> > + phy_write(phy, 0x04, 0x01e1);
> > + phy_write(phy, 0x00, 0x9140);
> > + phy_write(phy, 0x00, 0x1140);
> > +
> > + return 0;
> > +}
> > +
> > +static struct mii_phy_ops m88e1111_phy_ops = {
> > + .init = m88e1111_init,
> > + .setup_aneg = genmii_setup_aneg,
> > + .setup_forced = genmii_setup_forced,
> > + .poll_link = genmii_poll_link,
> > + .read_link = genmii_read_link
> > +};
> > +
> > +static struct mii_phy_def m88e1111_phy_def = {
> > +
> > + .phy_id = 0x01410CC0,
> > + .phy_id_mask = 0x0ffffff0,
> > + .name = "Marvell 88E1111 Ethernet",
> > + .ops = &m88e1111_phy_ops,
> > +};
> > +
> > static struct mii_phy_def *mii_phy_table[] = {
> > &cis8201_phy_def,
> > + &bcm5248_phy_def,
> > + &m88e1111_phy_def,
> > &genmii_phy_def,
>
> Seems sane to me -- ACK -- but we have multiple people sending me
> patches for a single driver. That's normal for janitorial cleanups
> across the whole tree, but discouraged when multiple people are actively
> working on the same driver.
>
> Please coordinate, and have ONE person send me patches...
Jeff, could you please pull in this patch for 2.6.24? We'll get the
coordination down for any further patches.
thx,
josh
>
next prev parent reply other threads:[~2007-10-23 15:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-12 13:03 [PATCH] PowerPC: Add NEW EMAC driver support to 440EPx Sequoia board Valentine Barshak
2007-10-12 13:07 ` Valentine Barshak
2007-10-12 14:39 ` Josh Boyer
2007-10-15 17:26 ` Josh Boyer
2007-10-15 17:57 ` [PATCH] PowerPC: Add BCM5248 and Marvell 88E1111 PHY support to NEW EMAC Valentine Barshak
2007-10-15 18:27 ` Jeff Garzik
2007-10-15 18:48 ` Josh Boyer
2007-10-15 18:53 ` Jeff Garzik
2007-10-15 18:59 ` Josh Boyer
2007-10-15 19:04 ` Jeff Garzik
2007-10-15 21:05 ` Benjamin Herrenschmidt
2007-10-15 22:47 ` Josh Boyer
2007-10-15 21:02 ` Benjamin Herrenschmidt
2007-10-23 15:20 ` Josh Boyer [this message]
2007-10-23 16:13 ` Kumar Gala
2007-10-23 16:17 ` Josh Boyer
2007-10-24 3:31 ` Benjamin Herrenschmidt
2007-10-24 19:24 ` Valentine Barshak
2007-10-15 17:58 ` [PATCH] PowerPC: Enable NEW EMAC support for Sequoia 440EPx Valentine Barshak
2007-10-15 20:59 ` [PATCH] PowerPC: Add NEW EMAC driver support to 440EPx Sequoia board Benjamin Herrenschmidt
2007-10-15 21:01 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071023102035.6d35d3fe@weaponx.rchland.ibm.com \
--to=jwboyer@linux.vnet.ibm.com \
--cc=jeff@garzik.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).