linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Valentine Barshak <vbarshak@ru.mvista.com>
To: linux-usb-devel@lists.sourceforge.net
Cc: linuxppc-dev@ozlabs.org, david-b@pacbell.net
Subject: [PATCH 1/2] USB: Rework OHCI PPC OF for new bindings
Date: Fri, 26 Oct 2007 16:13:30 +0400	[thread overview]
Message-ID: <20071026121330.GA28960@ru.mvista.com> (raw)
In-Reply-To: <4720DA11.9030103@genesi-usa.com>

Rework ohci-ppc-of driver to use big-endian property instead of
ohci-be/ohci-le compatible strings. Also remove unnecessary
user-selectable USB_OHCI_HCD_PPC_OF_LE/BE stuff, because
USB_OHCI_BIG_ENDIAN_DESC/MMIO should always be enabled for ppc
and USB_OHCI_LITTLE_ENDIAN is selected for USB_OHCI_HCD_PCI by default.
The compatible "mpc5200-ohci" property is kept for old bindings support.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
 drivers/usb/host/Kconfig       |   17 ++--------------
 drivers/usb/host/ohci-ppc-of.c |   42 ++++++++++-------------------------------
 2 files changed, 14 insertions(+), 45 deletions(-)

diff -pruN linux-2.6.orig/drivers/usb/host/Kconfig linux-2.6/drivers/usb/host/Kconfig
--- linux-2.6.orig/drivers/usb/host/Kconfig	2007-10-25 19:20:12.000000000 +0400
+++ linux-2.6/drivers/usb/host/Kconfig	2007-10-25 22:59:34.000000000 +0400
@@ -128,23 +128,12 @@ config USB_OHCI_HCD_PPC_OF
 	bool "OHCI support for PPC USB controller on OF platform bus"
 	depends on USB_OHCI_HCD && PPC_OF
 	default y
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
 	---help---
 	  Enables support for the USB controller PowerPC present on the
 	  OpenFirmware platform bus.
 
-config USB_OHCI_HCD_PPC_OF_BE
-	bool "Support big endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default y
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
-
-config USB_OHCI_HCD_PPC_OF_LE
-	bool "Support little endian HC"
-	depends on USB_OHCI_HCD_PPC_OF
-	default n
-	select USB_OHCI_LITTLE_ENDIAN
-
 config USB_OHCI_HCD_PCI
 	bool "OHCI support for PCI-bus USB controllers"
 	depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
@@ -180,7 +169,7 @@ config USB_OHCI_BIG_ENDIAN_MMIO
 config USB_OHCI_LITTLE_ENDIAN
 	bool
 	depends on USB_OHCI_HCD
-	default n if STB03xxx || PPC_MPC52xx
+	default n if STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF
 	default y
 
 config USB_UHCI_HCD
diff -pruN linux-2.6.orig/drivers/usb/host/ohci-ppc-of.c linux-2.6/drivers/usb/host/ohci-ppc-of.c
--- linux-2.6.orig/drivers/usb/host/ohci-ppc-of.c	2007-10-25 19:20:12.000000000 +0400
+++ linux-2.6/drivers/usb/host/ohci-ppc-of.c	2007-10-25 23:08:14.000000000 +0400
@@ -15,8 +15,8 @@
 
 #include <linux/signal.h>
 
-#include <asm/of_platform.h>
-#include <asm/prom.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 
 static int __devinit
@@ -91,15 +91,10 @@ ohci_hcd_ppc_of_probe(struct of_device *
 	int irq;
 
 	int rv;
-	int is_bigendian;
 
 	if (usb_disabled())
 		return -ENODEV;
 
-	is_bigendian =
-		of_device_is_compatible(dn, "ohci-bigendian") ||
-		of_device_is_compatible(dn, "ohci-be");
-
 	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
 
 	rv = of_address_to_resource(dn, 0, &res);
@@ -134,10 +129,14 @@ ohci_hcd_ppc_of_probe(struct of_device *
 	}
 
 	ohci = hcd_to_ohci(hcd);
-	if (is_bigendian) {
+
+	if (of_get_property(dn, "big-endian", NULL))
 		ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-		if (of_device_is_compatible(dn, "mpc5200-ohci"))
-			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+
+	if (of_device_is_compatible(dn, "mpc5200-usb-ohci") ||
+	    of_device_is_compatible(dn, "mpc5200-ohci")) {
+		ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
+			       OHCI_QUIRK_FRAME_NO;
 	}
 
 	ohci_hcd_init(ohci);
@@ -187,35 +186,16 @@ static int ohci_hcd_ppc_of_shutdown(stru
 
 
 static struct of_device_id ohci_hcd_ppc_of_match[] = {
-#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
 	{
-		.name = "usb",
-		.compatible = "ohci-bigendian",
+		.compatible = "mpc5200-ohci",
 	},
 	{
-		.name = "usb",
-		.compatible = "ohci-be",
-	},
-#endif
-#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
-	{
-		.name = "usb",
-		.compatible = "ohci-littledian",
+		.compatible = "usb-ohci",
 	},
-	{
-		.name = "usb",
-		.compatible = "ohci-le",
-	},
-#endif
 	{},
 };
 MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
 
-#if	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
-	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
-#error "No endianess selected for ppc-of-ohci"
-#endif
-
 
 static struct of_platform_driver ohci_hcd_ppc_of_driver = {
 	.name		= "ppc-of-ohci",

  parent reply	other threads:[~2007-10-26 12:15 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-24 16:22 [PATCH 0/2] USB: Rework OHCI PPC OF driver to support new bindings Valentine Barshak
2007-10-24 16:34 ` [PATCH 1/2] USB: Rework OHCI PPC OF for " Valentine Barshak
2007-10-24 22:05   ` Matt Sealey
2007-10-25  1:50     ` [linux-usb-devel] " David Brownell
2007-10-25  2:41       ` Grant Likely
2007-10-25 11:48         ` Valentine Barshak
2007-10-25 14:21           ` Grant Likely
2007-10-25 17:11             ` Valentine Barshak
2007-10-25 18:14               ` Matt Sealey
2007-10-25 18:13                 ` Valentine Barshak
2007-10-25 18:10             ` Matt Sealey
2007-10-25 18:01           ` Matt Sealey
2007-10-25 18:50             ` Valentine Barshak
2007-10-25 22:02               ` Matt Sealey
2007-10-26 11:24                 ` Valentine Barshak
2007-10-26 12:13             ` Valentine Barshak [this message]
2007-11-01 11:19     ` tnt
2007-11-01 12:44       ` Valentine Barshak
2007-11-01 13:46       ` [linux-usb-devel] " Dale Farnsworth
2007-10-24 16:35 ` [PATCH 2/2] PowerPC: Update USB OHCI DTS entires " Valentine Barshak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071026121330.GA28960@ru.mvista.com \
    --to=vbarshak@ru.mvista.com \
    --cc=david-b@pacbell.net \
    --cc=linux-usb-devel@lists.sourceforge.net \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).