[PATCH 0/4] PowerPC: 440GRx Rainier board support.

[PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Valentine Barshak]

The following patches add PowerPC 440GRx Rainier board support.
The board is almost identical to Sequoia, but doesn't have USB
and FPU is not supported.
Thanks,
Valentine.

[PATCH 1/4] PowerPC: 440GRx Rainier bootwrapper.

[Valentine Barshak]

Bootwrapper code for PowerPC 440GRx Rainier board.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
 arch/powerpc/boot/Makefile         |    3 +
 arch/powerpc/boot/cuboot-rainier.c |   56 +++++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 1 deletion(-)

diff -pruN linux-2.6.orig/arch/powerpc/boot/cuboot-rainier.c linux-2.6/arch/powerpc/boot/cuboot-rainier.c
--- linux-2.6.orig/arch/powerpc/boot/cuboot-rainier.c	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/arch/powerpc/boot/cuboot-rainier.c	2007-10-30 18:00:15.000000000 +0300
@@ -0,0 +1,56 @@
+/*
+ * Old U-boot compatibility for Rainier
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ * Copyright 2007 MontaVista Software, Inc
+ *
+ * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au>
+ * Copyright IBM Corporation, 2007
+ *
+ * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright IBM Corporation, 2007
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+
+static void rainier_fixups(void)
+{
+	unsigned long sysclk = 33333333;
+
+	ibm440ep_fixup_clocks(sysclk, 11059200);
+	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+	ibm4xx_denali_fixup_memsize();
+	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = rainier_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	ft_init(_dtb_start, 0, 32);
+	serial_console_init();
+}
diff -pruN linux-2.6.orig/arch/powerpc/boot/Makefile linux-2.6/arch/powerpc/boot/Makefile
--- linux-2.6.orig/arch/powerpc/boot/Makefile	2007-10-30 17:44:27.000000000 +0300
+++ linux-2.6/arch/powerpc/boot/Makefile	2007-10-30 18:00:15.000000000 +0300
@@ -56,7 +56,7 @@ src-plat := of.c cuboot-52xx.c cuboot-83
 		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \
-		fixed-head.S ep88xc.c cuboot-hpc2.c
+		fixed-head.S ep88xc.c cuboot-hpc2.c cuboot-rainier.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -158,6 +158,7 @@ image-$(CONFIG_MPC7448HPC2)		+= cuImage.
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
 image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
+image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 endif
 

[PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[Valentine Barshak]

PowerPC 440GRx Rainier DTS.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
 arch/powerpc/boot/dts/rainier.dts |  312 ++++++++++++++++++++++++++++++++++++++
 1 files changed, 312 insertions(+)

diff -pruN linux-2.6.orig/arch/powerpc/boot/dts/rainier.dts linux-2.6/arch/powerpc/boot/dts/rainier.dts
--- linux-2.6.orig/arch/powerpc/boot/dts/rainier.dts	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/arch/powerpc/boot/dts/rainier.dts	2007-10-30 18:00:15.000000000 +0300
@@ -0,0 +1,312 @@
+/*
+ * Device Tree Source for AMCC Rainier
+ *
+ * Based on Sequoia code
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,rainier";
+	compatible = "amcc,rainier";
+	dcr-parent = <&/cpus/PowerPC,440GRx@0>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,440GRx@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0e0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440grx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+		
+		SDRAM0: sdram {
+			device_type = "memory-controller";
+			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
+			dcr-reg = <010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
+			dcr-reg = <100 027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
+			dcr-reg = <180 62>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+					/*RXEOB*/ 1 &UIC0 b 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map-mask = <ffffffff>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440grx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <00000000 1 00000000 80000000
+			          80000000 1 80000000 80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440grx", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0 000000 4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "Kernel";
+						reg = <0 180000>;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <180000 200000>;
+					};
+					partition@380000 {
+						label = "file system";
+						reg = <380000 3aa0000>;
+					};
+					partition@3e20000 {
+						label = "kozio";
+						reg = <3e20000 140000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <3f60000 40000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <3fa0000 60000>;
+					};
+				};
+
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <ef600300 8>;
+		   		virtual-reg = <ef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <ef600400 8>;
+		   		virtual-reg = <ef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <ef600500 8>;
+		   		virtual-reg = <ef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <ef600600 8>;
+		   		virtual-reg = <ef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				device_type = "i2c";
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				device_type = "i2c";
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				device_type = "zmii-interface";
+				compatible = "ibm,zmii-440grx", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			RGMII0: emac-rgmii@ef601000 {
+				device_type = "rgmii-interface";
+				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
+				reg = <ef601000 8>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC0 18 4
+						/*Wake*/  1 &UIC1 1d 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC0 19 4
+						/*Wake*/  1 &UIC1 1f 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+			};
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+		bootargs = "console=ttyS0,115200";
+	};
+};

[PATCH 3/4] PowerPC: 440GRx Rainier board support.

[Valentine Barshak]

PowerPC 440GRx Rainier board support.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
 arch/powerpc/platforms/44x/Kconfig   |   16 ++++++++-
 arch/powerpc/platforms/44x/Makefile  |    3 +
 arch/powerpc/platforms/44x/rainier.c |   61 +++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+), 2 deletions(-)

diff -pruN linux-2.6.orig/arch/powerpc/platforms/44x/Kconfig linux-2.6/arch/powerpc/platforms/44x/Kconfig
--- linux-2.6.orig/arch/powerpc/platforms/44x/Kconfig	2007-10-30 17:44:42.000000000 +0300
+++ linux-2.6/arch/powerpc/platforms/44x/Kconfig	2007-10-30 18:04:28.000000000 +0300
@@ -22,6 +22,14 @@ config SEQUOIA
 	help
 	  This option enables support for the AMCC PPC440EPX evaluation board.
 
+config RAINIER
+	bool "Rainier"
+	depends on 44x
+	default n
+	select 440GRX
+	help
+	  This option enables support for the AMCC PPC440GRX evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
@@ -52,6 +60,12 @@ config 440EPX
 	select IBM_NEW_EMAC_RGMII
 	select IBM_NEW_EMAC_ZMII
 
+config 440GRX
+	bool
+	select IBM_NEW_EMAC_EMAC4
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+
 config 440GP
 	bool
 	select IBM_NEW_EMAC_ZMII
@@ -64,7 +78,7 @@ config 440SP
 
 config 440A
 	bool
-	depends on 440GX || 440EPX
+	depends on 440GX || 440EPX || 440GRX
 	default y
 
 # 44x errata/workaround config symbols, selected by the CPU models above
diff -pruN linux-2.6.orig/arch/powerpc/platforms/44x/Makefile linux-2.6/arch/powerpc/platforms/44x/Makefile
--- linux-2.6.orig/arch/powerpc/platforms/44x/Makefile	2007-10-30 17:44:42.000000000 +0300
+++ linux-2.6/arch/powerpc/platforms/44x/Makefile	2007-10-30 18:00:15.000000000 +0300
@@ -1,4 +1,5 @@
 obj-$(CONFIG_44x)	:= misc_44x.o
 obj-$(CONFIG_EBONY)	+= ebony.o
-obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_BAMBOO)	+= bamboo.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
+obj-$(CONFIG_RAINIER)	+= rainier.o
diff -pruN linux-2.6.orig/arch/powerpc/platforms/44x/rainier.c linux-2.6/arch/powerpc/platforms/44x/rainier.c
--- linux-2.6.orig/arch/powerpc/platforms/44x/rainier.c	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/arch/powerpc/platforms/44x/rainier.c	2007-10-30 18:00:15.000000000 +0300
@@ -0,0 +1,61 @@
+/*
+ * Rainier board specific routines
+ *
+ * Valentine Barshak <vbarshak@ru.mvista.com>
+ * Copyright 2007 MontaVista Software Inc.
+ *
+ * Based on the Bamboo code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/of_platform.h>
+#include "44x.h"
+
+static struct of_device_id rainier_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init rainier_device_probe(void)
+{
+	if (!machine_is(rainier))
+		return 0;
+
+	of_platform_bus_probe(NULL, rainier_of_bus, NULL);
+
+	return 0;
+}
+device_initcall(rainier_device_probe);
+
+static int __init rainier_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "amcc,rainier"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(rainier) {
+	.name 				= "Rainier",
+	.probe 				= rainier_probe,
+	.progress 			= udbg_progress,
+	.init_IRQ 			= uic_init_tree,
+	.get_irq 			= uic_get_irq,
+	.restart			= ppc44x_reset_system,
+	.calibrate_decr			= generic_calibrate_decr,
+};

[PATCH 4/4] PowerPC: 440GRx Rainier default config

[Valentine Barshak]

PowerPC 440GRx Rainier default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
 arch/powerpc/configs/rainier_defconfig |  868 +++++++++++++++++++++++++++++++++
 1 files changed, 868 insertions(+)

diff -pruN linux-2.6.orig/arch/powerpc/configs/rainier_defconfig linux-2.6/arch/powerpc/configs/rainier_defconfig
--- linux-2.6.orig/arch/powerpc/configs/rainier_defconfig	1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/arch/powerpc/configs/rainier_defconfig	2007-10-30 18:19:59.000000000 +0300
@@ -0,0 +1,868 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc1
+# Tue Oct 30 18:19:49 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+CONFIG_RAINIER=y
+CONFIG_440GRX=y
+CONFIG_440A=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="rainier.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set

Re: [PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Josh Boyer]

On Tue, 30 Oct 2007 19:45:11 +0300
Valentine Barshak <vbarshak@ru.mvista.com> wrote:

> The following patches add PowerPC 440GRx Rainier board support.
> The board is almost identical to Sequoia, but doesn't have USB
> and FPU is not supported.

General FYI, I'm probably going to queue these up for .25.  We should
be in bug-fix mode for .24.

josh

Re: [PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Valentine Barshak]

Josh Boyer wrote:
> On Tue, 30 Oct 2007 19:45:11 +0300
> Valentine Barshak <vbarshak@ru.mvista.com> wrote:
> 
>> The following patches add PowerPC 440GRx Rainier board support.
>> The board is almost identical to Sequoia, but doesn't have USB
>> and FPU is not supported.
> 
> General FYI, I'm probably going to queue these up for .25.  We should
> be in bug-fix mode for .24.

OK, thanks,
Valentine.

> 
> josh

Re: [PATCH 3/4] PowerPC: 440GRx Rainier board support.

[Arnd Bergmann]
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Re: [PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Josh Boyer]

On Tue, 30 Oct 2007 19:45:11 +0300
Valentine Barshak <vbarshak@ru.mvista.com> wrote:

> The following patches add PowerPC 440GRx Rainier board support.
> The board is almost identical to Sequoia, but doesn't have USB
> and FPU is not supported.

So why do we need anything other than the DTS and the defconfig?  I
would think the sequoia wrapper and platform files would suffice
completely for this.

josh

Re: [PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[David Gibson]

On Tue, Oct 30, 2007 at 07:56:50PM +0300, Valentine Barshak wrote:
> PowerPC 440GRx Rainier DTS.
[snip]
> +		SDRAM0: sdram {
> +			device_type = "memory-controller";

How many times do we need to say it...

Don't make up random device_type values.  This does not belong here.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[Olof Johansson]

On Wed, Oct 31, 2007 at 10:08:05AM +1100, David Gibson wrote:
> On Tue, Oct 30, 2007 at 07:56:50PM +0300, Valentine Barshak wrote:
> > PowerPC 440GRx Rainier DTS.
> [snip]
> > +		SDRAM0: sdram {
> > +			device_type = "memory-controller";
> 
> How many times do we need to say it...
> 
> Don't make up random device_type values.  This does not belong here.

Maybe there should be something like checkpatch.pl that warns about
these kinds of things so people can check for it without getting flamed
first. :-)

Lots of people base their dts'es on other ones, so until the kernel has
bene clean a while, this will happen all the time. I'm saying "a while"
because people tend to base them on what's fresh when they do the work,
but it might take a few months between then and when they post, etc.


-Olof

Re: [PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[Josh Boyer]

On Tue, 30 Oct 2007 20:56:51 -0500
Olof Johansson <olof@lixom.net> wrote:

> On Wed, Oct 31, 2007 at 10:08:05AM +1100, David Gibson wrote:
> > On Tue, Oct 30, 2007 at 07:56:50PM +0300, Valentine Barshak wrote:
> > > PowerPC 440GRx Rainier DTS.
> > [snip]
> > > +		SDRAM0: sdram {
> > > +			device_type = "memory-controller";
> > 
> > How many times do we need to say it...
> > 
> > Don't make up random device_type values.  This does not belong here.
> 
> Maybe there should be something like checkpatch.pl that warns about
> these kinds of things so people can check for it without getting flamed
> first. :-)

That's actually a decent idea.  We could even have this thing that
takes DTS files and processes them...  oh wait.

So why can't we make a whitelist of "allowed" device_types in DTC and
make it whine about anything outside of that?

josh

Re: [PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[David Gibson]

On Tue, Oct 30, 2007 at 09:09:17PM -0500, Josh Boyer wrote:
> On Tue, 30 Oct 2007 20:56:51 -0500
> Olof Johansson <olof@lixom.net> wrote:
> 
> > On Wed, Oct 31, 2007 at 10:08:05AM +1100, David Gibson wrote:
> > > On Tue, Oct 30, 2007 at 07:56:50PM +0300, Valentine Barshak wrote:
> > > > PowerPC 440GRx Rainier DTS.
> > > [snip]
> > > > +		SDRAM0: sdram {
> > > > +			device_type = "memory-controller";
> > > 
> > > How many times do we need to say it...
> > > 
> > > Don't make up random device_type values.  This does not belong here.
> > 
> > Maybe there should be something like checkpatch.pl that warns about
> > these kinds of things so people can check for it without getting flamed
> > first. :-)

I'd be gentler; except that I know Valentine has been active on this
list recently, so has almost certainly seen similar comments before.

> That's actually a decent idea.  We could even have this thing that
> takes DTS files and processes them...  oh wait.
> 
> So why can't we make a whitelist of "allowed" device_types in DTC and
> make it whine about anything outside of that?

Well, that sort of thing is the idea for dtc to check, when it has
checks enabled anyway.  Getting it so that it doesn't have too many
false positives is the tricky bit, as we've seen with some of the
existing checks (where "too many" is "almost any").

Patches welcome...

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

Re: [PATCH 3/4] PowerPC: 440GRx Rainier board support.

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 515 bytes --]

On Tue, 30 Oct 2007 19:57:39 +0300 Valentine Barshak <vbarshak@ru.mvista.com> wrote:
>
> +++ linux-2.6/arch/powerpc/platforms/44x/rainier.c	2007-10-30 18:00:15.000000000 +0300
> +#include <linux/init.h>
> +#include <asm/machdep.h>
> +#include <asm/prom.h>
> +#include <asm/udbg.h>
> +#include <asm/time.h>
> +#include <asm/uic.h>
> +#include <asm/of_platform.h>

You want <linux/of_platform.h>

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Valentine Barshak]

Josh Boyer wrote:
> On Tue, 30 Oct 2007 19:45:11 +0300
> Valentine Barshak <vbarshak@ru.mvista.com> wrote:
> 
>> The following patches add PowerPC 440GRx Rainier board support.
>> The board is almost identical to Sequoia, but doesn't have USB
>> and FPU is not supported.
> 
> So why do we need anything other than the DTS and the defconfig?  I
> would think the sequoia wrapper and platform files would suffice
> completely for this.

Yes, they would, but how to handle the board name in this case?
I mean the resulting image would be cuImage.sequoia for rainier and the 
DTS board name has to be sequoia for rainier too.
I don't now, may be it's not a big deal to call rainier a sequoia though.
What do you think?
Thanks,
Valentine.

> 
> josh

Re: [PATCH 3/4] PowerPC: 440GRx Rainier board support.

[Valentine Barshak]

Stephen Rothwell wrote:
> On Tue, 30 Oct 2007 19:57:39 +0300 Valentine Barshak <vbarshak@ru.mvista.com> wrote:
>> +++ linux-2.6/arch/powerpc/platforms/44x/rainier.c	2007-10-30 18:00:15.000000000 +0300
>> +#include <linux/init.h>
>> +#include <asm/machdep.h>
>> +#include <asm/prom.h>
>> +#include <asm/udbg.h>
>> +#include <asm/time.h>
>> +#include <asm/uic.h>
>> +#include <asm/of_platform.h>
> 
> You want <linux/of_platform.h>
> 
Oops, apparently this got here from the old sequoia.c
Will correct both.
Thanks,
Valentine.

Re: [PATCH 2/4] PowerPC: 440GRx Rainier DTS.

[Valentine Barshak]

Olof Johansson wrote:
> On Wed, Oct 31, 2007 at 10:08:05AM +1100, David Gibson wrote:
>> On Tue, Oct 30, 2007 at 07:56:50PM +0300, Valentine Barshak wrote:
>>> PowerPC 440GRx Rainier DTS.
>> [snip]
>>> +		SDRAM0: sdram {
>>> +			device_type = "memory-controller";
>> How many times do we need to say it...
>>
>> Don't make up random device_type values.  This does not belong here.
> 
> Maybe there should be something like checkpatch.pl that warns about
> these kinds of things so people can check for it without getting flamed
> first. :-)
> 
> Lots of people base their dts'es on other ones, so until the kernel has
> bene clean a while, this will happen all the time. I'm saying "a while"
> because people tend to base them on what's fresh when they do the work,
> but it might take a few months between then and when they post, etc.

Yep, It's been copy-pasted from sequoia.dts.
Sorry for that, I'll rmove both.
Thanks,
Valentine.

> 
> 
> -Olof

Re: [PATCH 0/4] PowerPC: 440GRx Rainier board support.

[Josh Boyer]

On Wed, 31 Oct 2007 15:21:13 +0300
Valentine Barshak <vbarshak@ru.mvista.com> wrote:

> Josh Boyer wrote:
> > On Tue, 30 Oct 2007 19:45:11 +0300
> > Valentine Barshak <vbarshak@ru.mvista.com> wrote:
> > 
> >> The following patches add PowerPC 440GRx Rainier board support.
> >> The board is almost identical to Sequoia, but doesn't have USB
> >> and FPU is not supported.
> > 
> > So why do we need anything other than the DTS and the defconfig?  I
> > would think the sequoia wrapper and platform files would suffice
> > completely for this.
> 
> Yes, they would, but how to handle the board name in this case?
> I mean the resulting image would be cuImage.sequoia for rainier and the 
> DTS board name has to be sequoia for rainier too.
> I don't now, may be it's not a big deal to call rainier a sequoia though.
> What do you think?

Let me think about this for a bit.  Theoretically, there should be a
way to have a common code base between these two boards and have the
images use the right names.

josh