From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kim Phillips <kim.phillips@freescale.com>
Cc: netdev@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulus@samba.org, Li Yang <leoli@freescale.com>,
jgarzik@pobox.com
Subject: Re: [PATCH 0/5] fixups for mpc8360 rev. 2.1 erratum #2 (RGMII Timing)
Date: Fri, 9 Nov 2007 16:33:50 +0300 [thread overview]
Message-ID: <20071109133350.GB21232@localhost.localdomain> (raw)
In-Reply-To: <20071105121530.5c38fbb7.kim.phillips@freescale.com>
On Mon, Nov 05, 2007 at 12:15:30PM -0600, Kim Phillips wrote:
> Hello all,
>
> the following patches fix RGMII timing for rev. 2.1 of the mpc8360,
> according to erratum #2 (erratum text included below). Basically the
> most intrusive part is the addition of two new RGMII Internal Delay
> modes; one for TX delay only, and the other for RX delay only (i.e, not
> both at the same time).
>
> Please review, and since this affects both netdev and powerpc trees,
> one maintainer should ack them for the other to push upstream (i.e,
> Kumar acks them, and Leo picks them up to go through netdev or the
> other way around; either way is fine with me). I'm hoping they're
> trivial enough to go in 2.6.24.
All five patches are
Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Let's hope they'll hit 2.6.24.
Thanks,
--
Anton Vorontsov
email: cbou@mail.ru
backup email: ya-cbou@yandex.ru
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2007-11-09 13:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-05 18:15 [PATCH 0/5] fixups for mpc8360 rev. 2.1 erratum #2 (RGMII Timing) Kim Phillips
2007-11-08 14:16 ` Anton Vorontsov
2007-11-08 18:15 ` Kim Phillips
2007-11-08 18:39 ` Anton Vorontsov
2007-11-08 19:11 ` Kim Phillips
2007-11-09 13:25 ` Anton Vorontsov
2007-11-09 20:16 ` Kim Phillips
2007-11-09 13:33 ` Anton Vorontsov [this message]
2007-11-19 23:36 ` Kim Phillips
2007-11-20 1:30 ` Jeff Garzik
2007-11-20 15:27 ` Kumar Gala
2007-11-20 11:08 ` Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071109133350.GB21232@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=jgarzik@pobox.com \
--cc=kim.phillips@freescale.com \
--cc=leoli@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).