From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: <linuxppc-dev@ozlabs.org>
Subject: [RFC/PATCH 12/14] powerpc: Add early udbg support for 40x processors
Date: Wed, 21 Nov 2007 17:16:30 +1100 [thread overview]
Message-ID: <20071121061720.83D5ADEBE3@ozlabs.org> (raw)
In-Reply-To: <1195625777.579001.269266058699.qpush@grosgo>
This adds some basic real mode based early udbg support for 40x
in order to debug things more easily
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/Kconfig.debug | 12 ++++++++++
arch/powerpc/kernel/misc_32.S | 39 +++++++++++++++++++++++++++++++++
arch/powerpc/kernel/udbg.c | 3 ++
arch/powerpc/kernel/udbg_16550.c | 33 +++++++++++++++++++++++++++
arch/powerpc/platforms/Kconfig.cputype | 1
include/asm-powerpc/udbg.h | 1
6 files changed, 89 insertions(+)
Index: linux-work/arch/powerpc/Kconfig.debug
===================================================================
--- linux-work.orig/arch/powerpc/Kconfig.debug 2007-11-21 12:44:03.000000000 +1100
+++ linux-work/arch/powerpc/Kconfig.debug 2007-11-21 12:47:58.000000000 +1100
@@ -220,6 +220,13 @@ config PPC_EARLY_DEBUG_44x
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port.
+config PPC_EARLY_DEBUG_40x
+ bool "Early serial debugging for IBM/AMCC 40x CPUs"
+ depends on 40x
+ help
+ Select this to enable early debugging for IBM 40x chips via the
+ inbuilt serial port.
+
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
depends on SERIAL_CPM
@@ -241,6 +248,11 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH
depends on PPC_EARLY_DEBUG_44x
default "0x1"
+config PPC_EARLY_DEBUG_40x_PHYSADDR
+ hex "Early debug UART physical address"
+ depends on PPC_EARLY_DEBUG_40x
+ default "0xef600300"
+
config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
Index: linux-work/arch/powerpc/kernel/misc_32.S
===================================================================
--- linux-work.orig/arch/powerpc/kernel/misc_32.S 2007-11-21 12:40:26.000000000 +1100
+++ linux-work/arch/powerpc/kernel/misc_32.S 2007-11-21 12:41:43.000000000 +1100
@@ -206,6 +206,45 @@ _GLOBAL(_nmask_and_or_msr)
isync
blr /* Done */
+#ifdef CONFIG_40x
+
+/*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_readb)
+ mfmsr r7
+ ori r0,r7,MSR_DR
+ xori r0,r0,MSR_DR
+ sync
+ mtmsr r0
+ sync
+ isync
+ lbz r3,0(r3)
+ sync
+ mtmsr r7
+ sync
+ isync
+ blr
+
+ /*
+ * Do an IO access in real mode
+ */
+_GLOBAL(real_writeb)
+ mfmsr r7
+ ori r0,r7,MSR_DR
+ xori r0,r0,MSR_DR
+ sync
+ mtmsr r0
+ sync
+ isync
+ stb r3,0(r4)
+ sync
+ mtmsr r7
+ sync
+ isync
+ blr
+
+#endif /* CONFIG_40x */
/*
* Flush MMU TLB
Index: linux-work/arch/powerpc/kernel/udbg.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/udbg.c 2007-11-21 12:38:11.000000000 +1100
+++ linux-work/arch/powerpc/kernel/udbg.c 2007-11-21 12:44:50.000000000 +1100
@@ -54,6 +54,9 @@ void __init udbg_early_init(void)
#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
/* PPC44x debug */
udbg_init_44x_as1();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_40x)
+ /* PPC40x debug */
+ udbg_init_40x_realmode();
#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
udbg_init_cpm();
#endif
Index: linux-work/arch/powerpc/kernel/udbg_16550.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/udbg_16550.c 2007-11-21 12:42:24.000000000 +1100
+++ linux-work/arch/powerpc/kernel/udbg_16550.c 2007-11-21 12:50:40.000000000 +1100
@@ -225,3 +225,36 @@ void __init udbg_init_44x_as1(void)
udbg_getc = udbg_44x_as1_getc;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_40x
+static void udbg_40x_real_putc(char c)
+{
+ if (udbg_comport) {
+ while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
+ /* wait for idle */;
+ real_writeb(c, &udbg_comport->thr); eieio();
+ if (c == '\n')
+ udbg_40x_real_putc('\r');
+ }
+}
+
+static int udbg_40x_real_getc(void)
+{
+ if (udbg_comport) {
+ while ((real_readb(&udbg_comport->lsr) & LSR_DR) == 0)
+ ; /* wait for char */
+ return real_readb(&udbg_comport->rbr);
+ }
+ return -1;
+}
+
+void __init udbg_init_40x_realmode(void)
+{
+ udbg_comport = (volatile struct NS16550 __iomem *)
+ CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
+
+ udbg_putc = udbg_40x_real_putc;
+ udbg_getc = udbg_40x_real_getc;
+ udbg_getc_poll = NULL;
+}
+#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
Index: linux-work/include/asm-powerpc/udbg.h
===================================================================
--- linux-work.orig/include/asm-powerpc/udbg.h 2007-11-21 12:44:31.000000000 +1100
+++ linux-work/include/asm-powerpc/udbg.h 2007-11-21 12:44:45.000000000 +1100
@@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_consol
extern void __init udbg_init_debug_beat(void);
extern void __init udbg_init_btext(void);
extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
extern void __init udbg_init_cpm(void);
#endif /* __KERNEL__ */
Index: linux-work/arch/powerpc/platforms/Kconfig.cputype
===================================================================
--- linux-work.orig/arch/powerpc/platforms/Kconfig.cputype 2007-11-21 12:50:16.000000000 +1100
+++ linux-work/arch/powerpc/platforms/Kconfig.cputype 2007-11-21 12:50:18.000000000 +1100
@@ -43,6 +43,7 @@ config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
select WANT_DEVICE_TREE
+ select PPC_UDBG_16550
config 44x
bool "AMCC 44x"
next prev parent reply other threads:[~2007-11-21 6:16 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-21 6:16 [RFC/PATCH 0/14] powerpc: 4xx PCI and PCI-X support Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 1/14] powerpc: Make isa_mem_base common to 32 and 64 bits Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 2/14] powerpc: Merge pci_process_bridge_OF_ranges() Benjamin Herrenschmidt
2007-11-22 18:35 ` Vitaly Bordug
2007-11-21 6:16 ` [RFC/PATCH 3/14] powerpc: Fix declaration of pcibios_free_controller Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 4/14] powerpc: Fix powerpc 32 bits resource fixup for 64 bits resources Benjamin Herrenschmidt
2007-11-22 18:31 ` Vitaly Bordug
2007-11-21 6:16 ` [RFC/PATCH 5/14] powerpc: Fix 440/440A machine check handling Benjamin Herrenschmidt
2007-11-21 13:12 ` Josh Boyer
2007-11-21 19:48 ` Benjamin Herrenschmidt
2007-11-21 19:51 ` Josh Boyer
2007-11-21 20:05 ` Benjamin Herrenschmidt
2007-11-28 21:34 ` Olof Johansson
2007-11-28 21:52 ` Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 6/14] powerpc: Add xmon function to dump 44x TLB Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 7/14] powerpc: Change 32 bits PCI message about resource allocation Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 8/14] powerpc: Fix kmalloc alignmenent on non-coherent DMA Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 9/14] powerpc: 4xx PLB to PCI-X support Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 10/14] powerpc: 4xx PLB to PCI 2.x support Benjamin Herrenschmidt
2007-11-21 6:16 ` Benjamin Herrenschmidt [this message]
2007-11-21 22:58 ` [RFC/PATCH 12/14] powerpc: Add early udbg support for 40x processors David Gibson
2007-11-22 0:00 ` Benjamin Herrenschmidt
2007-11-22 0:22 ` David Gibson
2007-11-21 6:16 ` [RFC/PATCH 11/14] powerpc: PCI support for 4xx Ebony board Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 13/14] powerpc: EP405 boards support for arch/powerpc Benjamin Herrenschmidt
2007-11-21 13:21 ` Josh Boyer
2007-11-21 19:49 ` Benjamin Herrenschmidt
2007-11-21 6:16 ` [RFC/PATCH 14/14] powerpc: Add PCI to Walnut platform Benjamin Herrenschmidt
2007-11-21 13:24 ` Josh Boyer
2007-11-21 6:35 ` [RFC/PATCH 0/14] powerpc: 4xx PCI and PCI-X support Benjamin Herrenschmidt
2007-11-21 13:23 ` Josh Boyer
2007-11-21 14:04 ` Stefan Roese
2007-11-21 14:33 ` Josh Boyer
2007-11-21 19:51 ` Benjamin Herrenschmidt
2007-11-21 19:50 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071121061720.83D5ADEBE3@ozlabs.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).