From: Kim Phillips <kim.phillips@freescale.com>
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org, Li Yang <leoli@freescale.com>,
linuxppc-dev@ozlabs.org
Subject: [PATCH 1/3][RESEND] phylib: add PHY interface modes for internal delay for tx and rx only
Date: Mon, 26 Nov 2007 16:17:48 -0600 [thread overview]
Message-ID: <20071126161748.9671b828.kim.phillips@freescale.com> (raw)
Allow phylib specification of cases where hardware needs to configure
PHYs for Internal Delay only on either RX or TX (not both).
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Li Yang <leoli@freescale.com>
---
include/linux/phy.h | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f0742b6..e10763d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -58,6 +58,8 @@ typedef enum {
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_RGMII_ID,
+ PHY_INTERFACE_MODE_RGMII_RXID,
+ PHY_INTERFACE_MODE_RGMII_TXID,
PHY_INTERFACE_MODE_RTBI
} phy_interface_t;
--
1.5.2.2
next reply other threads:[~2007-11-26 22:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-26 22:17 Kim Phillips [this message]
2007-12-01 21:33 ` [PATCH 1/3][RESEND] phylib: add PHY interface modes for internal delay for tx and rx only Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071126161748.9671b828.kim.phillips@freescale.com \
--to=kim.phillips@freescale.com \
--cc=jgarzik@pobox.com \
--cc=leoli@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).