From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.lixom.net (lixom.net [66.141.50.11]) by ozlabs.org (Postfix) with ESMTP id 63757DDE23 for ; Thu, 29 Nov 2007 13:54:56 +1100 (EST) Date: Wed, 28 Nov 2007 20:58:06 -0600 From: Olof Johansson To: jgarzik@pobox.com Subject: [PATCH] [11/12] pasemi_mac: Print warning when not attaching to a PHY Message-ID: <20071129025806.GL17215@lixom.net> References: <20071129025410.GA17215@lixom.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20071129025410.GA17215@lixom.net> Cc: linuxppc-dev@ozlabs.org, netdev@vger.kernel.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , pasemi_mac: Print warning when not attaching to a PHY Print a warning on the console when not connecting to a phy for an interface. It turns out to be a pretty common problem when someone gets the MDIO info wrong in their device tree, resulting in the macs running at a fixed 1Gbit FD. Signed-off-by: Olof Johansson --- drivers/net/pasemi_mac.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) Index: k.org/drivers/net/pasemi_mac.c =================================================================== --- k.org.orig/drivers/net/pasemi_mac.c +++ k.org/drivers/net/pasemi_mac.c @@ -1064,11 +1064,12 @@ static int pasemi_mac_open(struct net_de write_mac_reg(mac, PAS_MAC_CFG_PCFG, flags); ret = pasemi_mac_phy_init(dev); - /* Some configs don't have PHYs (XAUI etc), so don't complain about - * failed init due to -ENODEV. + /* Warn for missing PHY on SGMII (1Gig) ports. */ - if (ret && ret != -ENODEV) - dev_warn(&mac->pdev->dev, "phy init failed: %d\n", ret); + if (ret && mac->type == MAC_TYPE_GMAC) { + dev_warn(&mac->pdev->dev, "PHY init failed: %d.\n", ret); + dev_warn(&mac->pdev->dev, "Defaulting to 1Gbit full duplex\n"); + } netif_start_queue(dev); napi_enable(&mac->napi);