linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: <linuxppc-dev@ozlabs.org>
Subject: [PATCH 5/25] powerpc: Add xmon function to dump 44x TLB
Date: Thu, 06 Dec 2007 19:00:04 +1100	[thread overview]
Message-ID: <20071206080115.76E5FDDEC8@ozlabs.org> (raw)
In-Reply-To: <1196927999.714593.205329520306.qpush@grosgo>

This adds a function to xmon to dump the content of the 44x processor
TLB with a little bit of decoding (but not much).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

Did that to track down some machine checks I was having while working
on PCI support due to 32/64 bits resource screwage.
Useful to see where a given MMIO virtual address really maps to.

 arch/powerpc/xmon/xmon.c |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Index: linux-work/arch/powerpc/xmon/xmon.c
===================================================================
--- linux-work.orig/arch/powerpc/xmon/xmon.c	2007-12-03 11:48:03.000000000 +1100
+++ linux-work/arch/powerpc/xmon/xmon.c	2007-12-03 12:07:14.000000000 +1100
@@ -153,6 +153,10 @@ static const char *getvecname(unsigned l
 
 static int do_spu_cmd(void);
 
+#ifdef CONFIG_44x
+static void dump_tlb_44x(void);
+#endif
+
 int xmon_no_auto_backtrace;
 
 extern void xmon_enter(void);
@@ -231,6 +235,9 @@ Commands:\n\
 #ifdef CONFIG_PPC_STD_MMU_32
 "  u	dump segment registers\n"
 #endif
+#ifdef CONFIG_44x
+"  u	dump TLB\n"
+#endif
 "  ?	help\n"
 "  zr	reboot\n\
   zh	halt\n"
@@ -856,6 +863,11 @@ cmds(struct pt_regs *excp)
 			dump_segments();
 			break;
 #endif
+#ifdef CONFIG_44x
+		case 'u':
+			dump_tlb_44x();
+			break;
+#endif
 		default:
 			printf("Unrecognized command: ");
 		        do {
@@ -2581,6 +2593,32 @@ void dump_segments(void)
 }
 #endif
 
+#ifdef CONFIG_44x
+static void dump_tlb_44x(void)
+{
+	int i;
+
+	for (i = 0; i < PPC44x_TLB_SIZE; i++) {
+		unsigned long w0, w1, w2;
+		asm volatile("tlbre  %0,%1,0" : "=r" (w0) : "r" (i));
+		asm volatile("tlbre  %0,%1,1" : "=r" (w1) : "r" (i));
+		asm volatile("tlbre  %0,%1,2" : "=r" (w2) : "r" (i));
+		printf("[%02x] %08x %08x %08x ", i, w0, w1, w2);
+		if (w0 & PPC44x_TLB_VALID) {
+			printf("V %08x -> %01x%08x %c%c%c%c%c",
+			       w0 & PPC44x_TLB_EPN_MASK,
+			       w1 & PPC44x_TLB_ERPN_MASK,
+			       w1 & PPC44x_TLB_RPN_MASK,
+			       (w2 & PPC44x_TLB_W) ? 'W' : 'w',
+			       (w2 & PPC44x_TLB_I) ? 'I' : 'i',
+			       (w2 & PPC44x_TLB_M) ? 'M' : 'm',
+			       (w2 & PPC44x_TLB_G) ? 'G' : 'g',
+			       (w2 & PPC44x_TLB_E) ? 'E' : 'e');
+		}
+		printf("\n");
+	}
+}
+#endif /* CONFIG_44x */
 void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES

  parent reply	other threads:[~2007-12-06  8:00 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-06  7:59 [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 1/25] powerpc: Make isa_mem_base common to 32 and 64 bits Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 2/25] powerpc: Merge pci_process_bridge_OF_ranges() Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 3/25] powerpc: Fix powerpc 32 bits resource fixup for 64 bits resources Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A Benjamin Herrenschmidt
2007-12-10 17:59   ` Josh Boyer
2007-12-10 20:33     ` Benjamin Herrenschmidt
2007-12-10 20:44       ` Josh Boyer
2007-12-06  8:00 ` Benjamin Herrenschmidt [this message]
2007-12-06  8:00 ` [PATCH 7/25] powerpc: Add of_translate_dma_address Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 6/25] powerpc: Change 32 bits PCI message about resource allocation Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 8/25] powerpc: Improve support for 4xx indirect DCRs Benjamin Herrenschmidt
2007-12-07  2:19   ` Josh Boyer
2007-12-10  4:54     ` Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 9/25] powerpc: 4xx PLB to PCI-X support Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 10/25] powerpc: 4xx PLB to PCI 2.x support Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 11/25] powerpc: 4xx PLB to PCI Express support Benjamin Herrenschmidt
2007-12-06  9:26   ` Stefan Roese
2007-12-06 22:21     ` Benjamin Herrenschmidt
2007-12-07  7:02       ` Stefan Roese
2007-12-09  7:07         ` Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 12/25] powerpc: PCI support for 4xx Ebony board Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 13/25] powerpc: Remove useless volatiles in udbg_16550.c Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 14/25] powerpc: Add early udbg support for 40x processors Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 15/25] powerpc: early debug forces console log level to max Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc Benjamin Herrenschmidt
2007-12-07  3:05   ` Josh Boyer
2007-12-09  6:57     ` Benjamin Herrenschmidt
2007-12-10  4:56     ` Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 17/25] powerpc: Add PCI to Walnut platform Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board Benjamin Herrenschmidt
2007-12-06 19:56   ` Josh Boyer
2007-12-07  3:17   ` Josh Boyer
2007-12-09  7:01     ` Benjamin Herrenschmidt
2007-12-09 17:24       ` Olof Johansson
2007-12-09 18:24         ` Josh Boyer
2007-12-09 20:20           ` Olof Johansson
2007-12-09 19:58         ` Benjamin Herrenschmidt
2007-12-10  1:29           ` Josh Boyer
2007-12-09 23:43         ` CC munging by mailman lists (Was: Re: [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board) Stephen Rothwell
2007-12-10  5:39     ` [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 20/25] powerpc: Wire up 440EP USB controlle support to Bamboo board Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 19/25] powerpc: Wire up PCI on " Benjamin Herrenschmidt
2007-12-07  3:19   ` Josh Boyer
2007-12-09  7:03     ` Benjamin Herrenschmidt
2007-12-10  5:40     ` Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 21/25] powerpc: Adds decoding of 440SPE memory size to boot wrapper library Benjamin Herrenschmidt
2007-12-07  3:22   ` Josh Boyer
2007-12-09  7:04     ` Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 22/25] powerpc: Add mfspr/mtspr inline macros to 4xx bootwrapper Benjamin Herrenschmidt
2007-12-06  8:00 ` [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper Benjamin Herrenschmidt
2007-12-07  3:27   ` Josh Boyer
2007-12-09  7:05     ` Benjamin Herrenschmidt
2007-12-10  5:43     ` Benjamin Herrenschmidt
2007-12-10 11:54       ` Josh Boyer
2007-12-06  8:00 ` [PATCH 24/25] powerpc: Base support for 440SPe "Katmai" eval board Benjamin Herrenschmidt
2007-12-06  9:42   ` Stefan Roese
2007-12-06  8:00 ` [PATCH 25/25] powerpc: 4xx PCI-E Link setup improvements Benjamin Herrenschmidt
2007-12-06 13:32 ` [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others Josh Boyer
2007-12-06 20:25 ` Josh Boyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071206080115.76E5FDDEC8@ozlabs.org \
    --to=benh@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).