From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: <linuxppc-dev@ozlabs.org>
Subject: [PATCH 12/25] powerpc: PCI support for 4xx Ebony board
Date: Thu, 06 Dec 2007 19:00:10 +1100 [thread overview]
Message-ID: <20071206080121.D9FEBDDFB2@ozlabs.org> (raw)
In-Reply-To: <1196927999.714593.205329520306.qpush@grosgo>
This wires up the 4xx PCI support & device tree bits for
440GP based Ebony platform.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/boot/dts/ebony.dts | 41 +++++++++++++++++++++++++++++++++++-----
1 file changed, 36 insertions(+), 5 deletions(-)
Index: linux-work/arch/powerpc/boot/dts/ebony.dts
===================================================================
--- linux-work.orig/arch/powerpc/boot/dts/ebony.dts 2007-10-15 11:19:35.000000000 +1000
+++ linux-work/arch/powerpc/boot/dts/ebony.dts 2007-11-27 18:27:37.000000000 +1100
@@ -284,12 +284,43 @@
};
- PCIX0: pci@1234 {
+ PCIX0: pci@20ec00000 {
device_type = "pci";
- /* FIXME */
- reg = <2 0ec00000 8
- 2 0ec80000 f0
- 2 0ec80100 fc>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+ primary;
+ reg = <2 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ 2 0ed00000 4 /* Special cycles */
+ 2 0ec80000 f0 /* Internal registers */
+ 2 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 00000003 80000000 0 80000000
+ 01000000 0 00000000 00000002 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Ebony has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 17 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 18 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 19 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 1a 8
+ >;
};
};
next prev parent reply other threads:[~2007-12-06 8:00 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-06 7:59 [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 2/25] powerpc: Merge pci_process_bridge_OF_ranges() Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 1/25] powerpc: Make isa_mem_base common to 32 and 64 bits Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 3/25] powerpc: Fix powerpc 32 bits resource fixup for 64 bits resources Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 4/25] powerpc: Reworking machine check handling and Fix 440/440A Benjamin Herrenschmidt
2007-12-10 17:59 ` Josh Boyer
2007-12-10 20:33 ` Benjamin Herrenschmidt
2007-12-10 20:44 ` Josh Boyer
2007-12-06 8:00 ` [PATCH 5/25] powerpc: Add xmon function to dump 44x TLB Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 6/25] powerpc: Change 32 bits PCI message about resource allocation Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 7/25] powerpc: Add of_translate_dma_address Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 8/25] powerpc: Improve support for 4xx indirect DCRs Benjamin Herrenschmidt
2007-12-07 2:19 ` Josh Boyer
2007-12-10 4:54 ` Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 9/25] powerpc: 4xx PLB to PCI-X support Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 10/25] powerpc: 4xx PLB to PCI 2.x support Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 11/25] powerpc: 4xx PLB to PCI Express support Benjamin Herrenschmidt
2007-12-06 9:26 ` Stefan Roese
2007-12-06 22:21 ` Benjamin Herrenschmidt
2007-12-07 7:02 ` Stefan Roese
2007-12-09 7:07 ` Benjamin Herrenschmidt
2007-12-06 8:00 ` Benjamin Herrenschmidt [this message]
2007-12-06 8:00 ` [PATCH 13/25] powerpc: Remove useless volatiles in udbg_16550.c Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 14/25] powerpc: Add early udbg support for 40x processors Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 15/25] powerpc: early debug forces console log level to max Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 16/25] powerpc: EP405 boards support for arch/powerpc Benjamin Herrenschmidt
2007-12-07 3:05 ` Josh Boyer
2007-12-09 6:57 ` Benjamin Herrenschmidt
2007-12-10 4:56 ` Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 17/25] powerpc: Add PCI to Walnut platform Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board Benjamin Herrenschmidt
2007-12-06 19:56 ` Josh Boyer
2007-12-07 3:17 ` Josh Boyer
2007-12-09 7:01 ` Benjamin Herrenschmidt
2007-12-09 17:24 ` Olof Johansson
2007-12-09 18:24 ` Josh Boyer
2007-12-09 20:20 ` Olof Johansson
2007-12-09 19:58 ` Benjamin Herrenschmidt
2007-12-10 1:29 ` Josh Boyer
2007-12-09 23:43 ` CC munging by mailman lists (Was: Re: [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board) Stephen Rothwell
2007-12-10 5:39 ` [PATCH 18/25] powerpc: Base support for 440GX Taishan eval board Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 20/25] powerpc: Wire up 440EP USB controlle support to Bamboo board Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 19/25] powerpc: Wire up PCI on " Benjamin Herrenschmidt
2007-12-07 3:19 ` Josh Boyer
2007-12-09 7:03 ` Benjamin Herrenschmidt
2007-12-10 5:40 ` Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 21/25] powerpc: Adds decoding of 440SPE memory size to boot wrapper library Benjamin Herrenschmidt
2007-12-07 3:22 ` Josh Boyer
2007-12-09 7:04 ` Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 22/25] powerpc: Add mfspr/mtspr inline macros to 4xx bootwrapper Benjamin Herrenschmidt
2007-12-06 8:00 ` [PATCH 23/25] powerpc: Rework 4xx clock probing in boot wrapper Benjamin Herrenschmidt
2007-12-07 3:27 ` Josh Boyer
2007-12-09 7:05 ` Benjamin Herrenschmidt
2007-12-10 5:43 ` Benjamin Herrenschmidt
2007-12-10 11:54 ` Josh Boyer
2007-12-06 8:00 ` [PATCH 24/25] powerpc: Base support for 440SPe "Katmai" eval board Benjamin Herrenschmidt
2007-12-06 9:42 ` Stefan Roese
2007-12-06 8:00 ` [PATCH 25/25] powerpc: 4xx PCI-E Link setup improvements Benjamin Herrenschmidt
2007-12-06 13:32 ` [PATCH 0/25] powerpc: 4xx PCI, PCI-X and PCI-Express support among others Josh Boyer
2007-12-06 20:25 ` Josh Boyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071206080121.D9FEBDDFB2@ozlabs.org \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).