From: Jon Smirl <jonsmirl@gmail.com>
To: i2c@lm-sensors.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names
Date: Mon, 10 Dec 2007 13:33:25 -0500 [thread overview]
Message-ID: <20071210183325.12584.66181.stgit@terra.home> (raw)
In-Reply-To: <20071210183323.12584.88127.stgit@terra.home>
This patch allows new style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). I've
tested it on PowerPC and x86. This change is required for PowerPC
device tree support.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
---
drivers/i2c/i2c-core.c | 34 +++++++++++++++++++++++++++-------
include/linux/i2c.h | 5 ++---
include/linux/mod_devicetable.h | 9 +++++++++
3 files changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index b5e13e4..6fa6bab 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -47,10 +47,26 @@ static DEFINE_IDR(i2c_adapter_idr);
/* ------------------------------------------------------------------------- */
-static int i2c_device_match(struct device *dev, struct device_driver *drv)
+static const struct i2c_device_id *i2c_device_match(const struct i2c_device_id *id, struct i2c_client *client)
+{
+ /* new style drivers use the same kind of driver matching policy
+ * as platform devices or SPI: compare device and driver IDs.
+ */
+ if (id) {
+ while (id->name[0]) {
+ if (strcmp(client->driver_name, id->name) == 0)
+ return id;
+ id++;
+ }
+ }
+ return NULL;
+}
+
+static int i2c_bus_match(struct device *dev, struct device_driver *drv)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_driver *driver = to_i2c_driver(drv);
+ const struct i2c_device_id *found_id;
/* make legacy i2c drivers bypass driver model probing entirely;
* such drivers scan each i2c adapter/bus themselves.
@@ -58,10 +74,11 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
if (!is_newstyle_driver(driver))
return 0;
- /* new style drivers use the same kind of driver matching policy
- * as platform devices or SPI: compare device and driver IDs.
- */
- return strcmp(client->driver_name, drv->name) == 0;
+ found_id = i2c_device_match(driver->id_table, client);
+ if (found_id)
+ return 1;
+
+ return 0;
}
#ifdef CONFIG_HOTPLUG
@@ -89,12 +106,15 @@ static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_driver *driver = to_i2c_driver(dev->driver);
+ const struct i2c_device_id *id;
if (!driver->probe)
return -ENODEV;
client->driver = driver;
dev_dbg(dev, "probe\n");
- return driver->probe(client);
+
+ id = i2c_device_match(driver->id_table, client);
+ return driver->probe(client, id);
}
static int i2c_device_remove(struct device *dev)
@@ -189,7 +209,7 @@ static struct device_attribute i2c_dev_attrs[] = {
static struct bus_type i2c_bus_type = {
.name = "i2c",
.dev_attrs = i2c_dev_attrs,
- .match = i2c_device_match,
+ .match = i2c_bus_match,
.uevent = i2c_device_uevent,
.probe = i2c_device_probe,
.remove = i2c_device_remove,
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a100c9f..0ca1a59 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -126,7 +126,7 @@ struct i2c_driver {
* With the driver model, device enumeration is NEVER done by drivers;
* it's done by infrastructure. (NEW STYLE DRIVERS ONLY)
*/
- int (*probe)(struct i2c_client *);
+ int (*probe)(struct i2c_client *, const struct i2c_device_id *id);
int (*remove)(struct i2c_client *);
/* driver model interfaces that don't relate to enumeration */
@@ -141,11 +141,10 @@ struct i2c_driver {
struct device_driver driver;
struct list_head list;
+ struct i2c_device_id *id_table;
};
#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
-#define I2C_NAME_SIZE 20
-
/**
* struct i2c_client - represent an I2C slave device
* @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index e9fddb4..688fad6 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -367,4 +367,13 @@ struct virtio_device_id {
};
#define VIRTIO_DEV_ANY_ID 0xffffffff
+/* i2c */
+
+#define I2C_NAME_SIZE 40
+struct i2c_device_id {
+ char name[I2C_NAME_SIZE];
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+
#endif /* LINUX_MOD_DEVICETABLE_H */
next prev parent reply other threads:[~2007-12-10 18:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-10 18:33 [PATCH 0/5] Series to add device tree naming to i2c Jon Smirl
2007-12-10 18:33 ` Jon Smirl [this message]
2007-12-10 18:33 ` [PATCH 2/5] Modify several rtc drivers to use the alias names list property of i2c Jon Smirl
2007-12-10 18:33 ` [PATCH 3/5] Clean up error returns Jon Smirl
2007-12-10 18:33 ` [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver Jon Smirl
2007-12-10 18:33 ` [PATCH 5/5] Convert pfc8563 i2c driver from old style to new style Jon Smirl
2007-12-11 21:37 ` [PATCH 0/5] Series to add device tree naming to i2c Geert Uytterhoeven
2007-12-11 22:44 ` Jon Smirl
-- strict thread matches above, loose matches on Subject: below --
2007-12-20 4:41 [PATCH 0/5] Version 17, series " Jon Smirl
2007-12-20 4:41 ` [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names Jon Smirl
2008-01-11 19:20 ` [i2c] " Jean Delvare
2008-01-12 8:46 ` Jean Delvare
2008-01-12 16:26 ` Jon Smirl
2008-01-13 14:41 ` Jean Delvare
2008-01-13 16:24 ` Jon Smirl
2008-01-13 17:40 ` Jean Delvare
2008-01-13 18:01 ` Jon Smirl
2008-01-13 18:45 ` Jean Delvare
2008-01-13 18:50 ` Jon Smirl
2008-01-13 19:05 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071210183325.12584.66181.stgit@terra.home \
--to=jonsmirl@gmail.com \
--cc=i2c@lm-sensors.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).