From: Jon Smirl <jonsmirl@gmail.com>
To: i2c@lm-sensors.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver
Date: Mon, 10 Dec 2007 13:33:32 -0500 [thread overview]
Message-ID: <20071210183332.12584.76341.stgit@terra.home> (raw)
In-Reply-To: <20071210183323.12584.88127.stgit@terra.home>
Convert MPC i2c driver from being a platform_driver to an open firmware version. Error returns were improved. Routine names were changed from fsl_ to mpc_ to make them match the file name.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
---
arch/powerpc/sysdev/fsl_soc.c | 96 -------------------------
drivers/i2c/busses/i2c-mpc.c | 158 +++++++++++++++++++++++++++++------------
2 files changed, 110 insertions(+), 144 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 268638a..d6ef264 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -318,102 +318,6 @@ err:
arch_initcall(gfar_of_init);
-#ifdef CONFIG_I2C_BOARDINFO
-#include <linux/i2c.h>
-
-static void __init of_register_i2c_devices(struct device_node *adap_node,
- int bus_num)
-{
- struct device_node *node = NULL;
- const char *compatible;
-
- while ((node = of_get_next_child(adap_node, node))) {
- struct i2c_board_info info = {};
- const u32 *addr;
- int len;
-
- addr = of_get_property(node, "reg", &len);
- if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
- printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
- continue;
- }
-
- info.irq = irq_of_parse_and_map(node, 0);
- if (info.irq == NO_IRQ)
- info.irq = -1;
-
- compatible = of_get_property(node, "compatible", &len);
- if (!compatible) {
- printk(KERN_WARNING "i2c-mpc.c: invalid entry, missing compatible attribute\n");
- continue;
- }
- strncpy(info.driver_name, compatible, sizeof(info.driver_name));
-
- info.addr = *addr;
-
- i2c_register_board_info(bus_num, &info, 1);
- }
-}
-
-static int __init fsl_i2c_of_init(void)
-{
- struct device_node *np;
- unsigned int i;
- struct platform_device *i2c_dev;
- int ret;
-
- for (np = NULL, i = 0;
- (np = of_find_compatible_node(np, "i2c", "fsl-i2c")) != NULL;
- i++) {
- struct resource r[2];
- struct fsl_i2c_platform_data i2c_data;
- const unsigned char *flags = NULL;
-
- memset(&r, 0, sizeof(r));
- memset(&i2c_data, 0, sizeof(i2c_data));
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
- if (IS_ERR(i2c_dev)) {
- ret = PTR_ERR(i2c_dev);
- goto err;
- }
-
- i2c_data.device_flags = 0;
- flags = of_get_property(np, "dfsrr", NULL);
- if (flags)
- i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
- flags = of_get_property(np, "fsl5200-clocking", NULL);
- if (flags)
- i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
-
- ret =
- platform_device_add_data(i2c_dev, &i2c_data,
- sizeof(struct
- fsl_i2c_platform_data));
- if (ret)
- goto unreg;
-
- of_register_i2c_devices(np, i);
- }
-
- return 0;
-
-unreg:
- platform_device_unregister(i2c_dev);
-err:
- return ret;
-}
-
-arch_initcall(fsl_i2c_of_init);
-#endif
-
#ifdef CONFIG_PPC_83xx
static int __init mpc83xx_wdt_init(void)
{
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 7c35a8f..6f080d4 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -17,7 +17,7 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <asm/io.h>
#include <linux/fsl_devices.h>
@@ -25,13 +25,13 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
-#define MPC_I2C_ADDR 0x00
+#define DRV_NAME "mpc-i2c"
+
#define MPC_I2C_FDR 0x04
#define MPC_I2C_CR 0x08
#define MPC_I2C_SR 0x0c
#define MPC_I2C_DR 0x10
#define MPC_I2C_DFSRR 0x14
-#define MPC_I2C_REGION 0x20
#define CCR_MEN 0x80
#define CCR_MIEN 0x40
@@ -316,105 +316,167 @@ static struct i2c_adapter mpc_ops = {
.retries = 1
};
-static int fsl_i2c_probe(struct platform_device *pdev)
+struct i2c_driver_device {
+ char *of_device;
+ char *i2c_driver;
+ char *i2c_type;
+};
+
+static void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node)
+{
+ struct device_node *node = NULL;
+
+ while ((node = of_get_next_child(adap_node, node))) {
+ struct i2c_board_info info;
+ const u32 *addr;
+ const char *compatible;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+ printk(KERN_ERR "i2c-mpc.c: invalid entry, missing reg attribute\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ compatible = of_get_property(node, "compatible", &len);
+ if (!compatible) {
+ printk(KERN_ERR "i2c-mpc.c: invalid entry, missing compatible attribute\n");
+ continue;
+ }
+ strncpy(info.driver_name, compatible, sizeof(info.driver_name));
+ info.type[0] = '\0';
+
+ info.platform_data = NULL;
+ info.addr = *addr;
+
+ if (!i2c_new_device(adap, &info)) {
+ printk(KERN_ERR "i2c-mpc.c: Failed to load driver for %s\n", info.driver_name);
+ continue;
+ }
+ }
+}
+
+static int mpc_i2c_probe(struct of_device *op, const struct of_device_id *match)
{
int result = 0;
struct mpc_i2c *i2c;
- struct fsl_i2c_platform_data *pdata;
- struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
- i2c->irq = platform_get_irq(pdev, 0);
- if (i2c->irq < 0) {
- result = -ENXIO;
- goto fail_get_irq;
- }
- i2c->flags = pdata->device_flags;
- init_waitqueue_head(&i2c->queue);
+ if (of_get_property(op->node, "dfsrr", NULL))
+ i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
- i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
+ if (of_device_is_compatible(op->node, "mpc5200-i2c"))
+ i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->base = of_iomap(op->node, 0);
if (!i2c->base) {
printk(KERN_ERR "i2c-mpc - failed to map controller\n");
result = -ENOMEM;
goto fail_map;
}
- if (i2c->irq != 0)
- if ((result = request_irq(i2c->irq, mpc_i2c_isr,
- IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
- printk(KERN_ERR
- "i2c-mpc - failed to attach interrupt\n");
- goto fail_irq;
- }
+ i2c->irq = irq_of_parse_and_map(op->node, 0);
+ if (i2c->irq == NO_IRQ) {
+ result = -ENXIO;
+ goto fail_irq;
+ }
+
+ result = request_irq(i2c->irq, mpc_i2c_isr, IRQF_SHARED, "i2c-mpc", i2c));
+ if (result < 0) {
+ printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
+ goto fail_request;
+ }
mpc_i2c_setclock(i2c);
- platform_set_drvdata(pdev, i2c);
+
+ dev_set_drvdata(&op->dev, i2c);
i2c->adap = mpc_ops;
- i2c->adap.nr = pdev->id;
i2c_set_adapdata(&i2c->adap, i2c);
- i2c->adap.dev.parent = &pdev->dev;
- if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
+ i2c->adap.dev.parent = &op->dev;
+
+ result = i2c_add_adapter(&i2c->adap);
+ if (result < 0) {
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
goto fail_add;
}
+ of_register_i2c_devices(&i2c->adap, op->node);
+
return result;
- fail_add:
- if (i2c->irq != 0)
- free_irq(i2c->irq, i2c);
- fail_irq:
+fail_add:
+ free_irq(i2c->irq, i2c);
+fail_request:
+ irq_dispose_mapping(i2c->irq);
+fail_irq:
iounmap(i2c->base);
- fail_map:
- fail_get_irq:
+fail_map:
kfree(i2c);
return result;
};
-static int fsl_i2c_remove(struct platform_device *pdev)
+static int mpc_i2c_remove(struct of_device *op)
{
- struct mpc_i2c *i2c = platform_get_drvdata(pdev);
+ struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
i2c_del_adapter(&i2c->adap);
- platform_set_drvdata(pdev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
if (i2c->irq != NO_IRQ)
free_irq(i2c->irq, i2c);
+ irq_dispose_mapping(i2c->irq);
iounmap(i2c->base);
kfree(i2c);
return 0;
};
+static struct of_device_id mpc_i2c_of_match[] = {
+ {
+ .compatible = "fsl-i2c",
+ },
+};
+MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
+
+
/* Structure for a device driver */
-static struct platform_driver fsl_i2c_driver = {
- .probe = fsl_i2c_probe,
- .remove = fsl_i2c_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "fsl-i2c",
+static struct of_platform_driver mpc_i2c_driver = {
+ .match_table = mpc_i2c_of_match,
+ .probe = mpc_i2c_probe,
+ .remove = __devexit_p(mpc_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
},
};
-static int __init fsl_i2c_init(void)
+static int __init mpc_i2c_init(void)
{
- return platform_driver_register(&fsl_i2c_driver);
+ int rv;
+
+ rv = of_register_platform_driver(&mpc_i2c_driver);
+ if (rv)
+ printk(KERN_ERR DRV_NAME " of_register_platform_driver failed (%i)\n", rv);
+ return rv;
}
-static void __exit fsl_i2c_exit(void)
+static void __exit mpc_i2c_exit(void)
{
- platform_driver_unregister(&fsl_i2c_driver);
+ of_unregister_platform_driver(&mpc_i2c_driver);
}
-module_init(fsl_i2c_init);
-module_exit(fsl_i2c_exit);
+module_init(mpc_i2c_init);
+module_exit(mpc_i2c_exit);
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
MODULE_DESCRIPTION
next prev parent reply other threads:[~2007-12-10 18:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-10 18:33 [PATCH 0/5] Series to add device tree naming to i2c Jon Smirl
2007-12-10 18:33 ` [PATCH 1/5] Implement module aliasing for i2c to translate from device tree names Jon Smirl
2007-12-10 18:33 ` [PATCH 2/5] Modify several rtc drivers to use the alias names list property of i2c Jon Smirl
2007-12-10 18:33 ` [PATCH 3/5] Clean up error returns Jon Smirl
2007-12-10 18:33 ` Jon Smirl [this message]
2007-12-10 18:33 ` [PATCH 5/5] Convert pfc8563 i2c driver from old style to new style Jon Smirl
2007-12-11 21:37 ` [PATCH 0/5] Series to add device tree naming to i2c Geert Uytterhoeven
2007-12-11 22:44 ` Jon Smirl
-- strict thread matches above, loose matches on Subject: below --
2007-12-20 4:41 [PATCH 0/5] Version 17, series " Jon Smirl
2007-12-20 4:41 ` [PATCH 4/5] Convert PowerPC MPC i2c to of_platform_driver from platform_driver Jon Smirl
2007-12-20 5:16 ` David Gibson
2007-12-20 6:01 ` Olof Johansson
2007-12-20 6:04 ` Stefan Roese
2007-12-20 15:56 ` Jon Smirl
2008-01-02 19:41 ` Jochen Friedrich
2008-01-02 19:49 ` Jon Smirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071210183332.12584.76341.stgit@terra.home \
--to=jonsmirl@gmail.com \
--cc=i2c@lm-sensors.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).