From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH RFC 1/7] [POWERPC] Implement GPIO API embryo
Date: Mon, 10 Dec 2007 23:48:25 +0300 [thread overview]
Message-ID: <20071210204825.GA32278@localhost.localdomain> (raw)
In-Reply-To: <20071210204705.GA31263@localhost.localdomain>
This patch implements GPIO API as described in Documentation/gpio.txt.
Two calls unimplemented though: irq_to_gpio and gpio_to_irq.
I'm also providing OF helpers.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/Kconfig | 4 +++
arch/powerpc/kernel/prom_parse.c | 50 +++++++++++++++++++++++++++++++++++++
include/asm-powerpc/gpio.h | 51 ++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/prom.h | 23 +++++++++++++++++
4 files changed, 128 insertions(+), 0 deletions(-)
create mode 100644 include/asm-powerpc/gpio.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 232c298..596982f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -73,6 +73,10 @@ config GENERIC_FIND_NEXT_BIT
bool
default y
+config GENERIC_GPIO
+ bool
+ default n
+
config ARCH_NO_VIRT_TO_BUS
def_bool PPC64
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index b5c96af..5228fe6 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -7,6 +7,7 @@
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <asm/prom.h>
+#include <asm/gpio.h>
#include <asm/pci-bridge.h>
#ifdef DEBUG
@@ -1067,3 +1068,52 @@ void __iomem *of_iomap(struct device_node *np, int index)
return ioremap(res.start, 1 + res.end - res.start);
}
EXPORT_SYMBOL(of_iomap);
+
+int __of_parse_gpio_bank_pin(struct device_node *np, int index,
+ int bank_width, int max_bank)
+{
+ int bank;
+ int pin;
+ const u32 *gpios;
+ int len;
+
+ gpios = of_get_property(np, "gpios", &len);
+ len /= sizeof(u32);
+
+ if (len < 2 || len % 2 || index > len / 2 - 1)
+ return -EINVAL;
+
+ bank = gpios[index * 2];
+ pin = gpios[index * 2 + 1];
+
+ if (bank >= max_bank || pin >= bank_width)
+ return -EINVAL;
+
+ return bank * bank_width + pin;
+}
+EXPORT_SYMBOL_GPL(__of_parse_gpio_bank_pin);
+
+int of_get_gpio(struct device_node *np, int index)
+{
+ int ret;
+ const phandle *gc_ph;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gpio_chip;
+
+ gc_ph = of_get_property(np, "gpio-parent", NULL);
+ if (!gc_ph)
+ return -EINVAL;
+
+ gc = of_find_node_by_phandle(*gc_ph);
+ if (!gc || !gc->data)
+ return -EINVAL;
+
+ of_gpio_chip = gc->data;
+
+ ret = of_gpio_chip->xlate(np, index);
+ if (ret < 0)
+ of_node_put(gc);
+
+ return ret;
+}
+EXPORT_SYMBOL(of_get_gpio);
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
new file mode 100644
index 0000000..f7513ff
--- /dev/null
+++ b/include/asm-powerpc/gpio.h
@@ -0,0 +1,51 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ * Copyright (c) 2007 Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#ifdef CONFIG_GENERIC_GPIO
+
+extern int gpio_request(unsigned int gpio, const char *label);
+static inline void gpio_free(unsigned int gpio) {}
+
+extern int gpio_direction_input(unsigned int gpio);
+extern int gpio_direction_output(unsigned int gpio, int value);
+
+extern int gpio_get_value(unsigned int gpio);
+extern int gpio_set_value(unsigned int gpio, int value);
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -ENOSYS;
+}
+
+/*
+ * OF specific gpio_chip handler.
+ */
+struct of_gpio_chip {
+ int (*xlate)(struct device_node *np, int index);
+};
+
+#endif /* CONFIG_GENERIC_GPIO */
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 925e2d3..019af61 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -326,6 +326,29 @@ extern int of_irq_to_resource(struct device_node *dev, int index,
*/
extern void __iomem *of_iomap(struct device_node *device, int index);
+/**
+ * __of_parse_gpio_bank_pin - Helper function to translate "bank pin" GPIOs
+ * @np: device node to get GPIO from
+ * @index: index of the GPIO
+ * @bank_width: pins per bank
+ * @max_bank: maximum value to represent a bank
+ *
+ * Returns GPIO number to use with Linux generic GPIO api, or
+ * one of the errno value on the error condition.
+ */
+extern int __of_parse_gpio_bank_pin(struct device_node *np, int index,
+ int bank_width, int max_bank);
+
+/**
+ * of_get_gpio - Translate GPIO number given in the device tree
+ * @np: device node to get GPIO from
+ * @index: index of the GPIO
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or
+ * one of the errno value on the error condition.
+ */
+extern int of_get_gpio(struct device_node *np, int index);
+
/*
* NB: This is here while we transition from using asm/prom.h
* to linux/of.h
--
1.5.2.2
next prev parent reply other threads:[~2007-12-10 20:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-10 20:47 [PATCH RFC 0/7] "NAND on UPM" and related patches Anton Vorontsov
2007-12-10 20:48 ` Anton Vorontsov [this message]
2007-12-12 16:48 ` [PATCH RFC 1/7] [POWERPC] Implement GPIO API embryo Scott Wood
2007-12-12 17:10 ` Anton Vorontsov
2007-12-10 20:48 ` [PATCH RFC 2/7] [POWERPC] QE: implement GPIO API Anton Vorontsov
2007-12-10 20:48 ` [PATCH RFC 3/7] [POWERPC] CPM2: " Anton Vorontsov
2007-12-12 15:49 ` Jochen Friedrich
2007-12-12 16:03 ` Anton Vorontsov
2007-12-12 16:56 ` Scott Wood
2007-12-10 20:49 ` [PATCH RFC 4/7] [GPIO] Let drivers link if they support GPIO API as an addition Anton Vorontsov
2007-12-10 22:55 ` David Brownell
2007-12-10 23:04 ` Anton Vorontsov
2008-02-22 23:42 ` David Brownell
2008-02-22 23:35 ` Anton Vorontsov
2007-12-10 20:49 ` [PATCH RFC 5/7] [POWERPC] FSL UPM: routines to manage FSL UPMs Anton Vorontsov
2007-12-10 20:49 ` [PATCH RFC 6/7] [POWERPC][NAND] FSL UPM NAND driver Anton Vorontsov
2007-12-10 20:49 ` [PATCH RFC 7/7] [POWERPC] MPC8360E-RDK: add support for NAND on UPM Anton Vorontsov
2007-12-10 23:03 ` David Gibson
2007-12-10 23:16 ` Anton Vorontsov
2007-12-12 16:59 ` Scott Wood
2007-12-10 23:04 ` [PATCH RFC 0/7] "NAND on UPM" and related patches David Gibson
2007-12-10 23:10 ` Anton Vorontsov
2007-12-11 0:36 ` David Gibson
2007-12-12 12:47 ` Anton Vorontsov
2007-12-16 6:44 ` David Gibson
2007-12-12 16:39 ` Scott Wood
2007-12-12 16:40 ` Scott Wood
2007-12-12 16:55 ` Anton Vorontsov
2007-12-12 16:54 ` Scott Wood
2007-12-12 20:58 ` Anton Vorontsov
2007-12-12 21:06 ` Scott Wood
2007-12-12 21:13 ` Scott Wood
2007-12-13 14:09 ` Anton Vorontsov
2007-12-13 3:01 ` Chris Fester
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071210204825.GA32278@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).