* [PATCH] drivers/net/: Spelling fixes
[not found] <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918891.git.joe@perches.com>
@ 2007-12-17 19:40 ` Joe Perches
2007-12-17 20:56 ` Stefano Brivio
2007-12-17 20:43 ` John W. Linville
2007-12-17 21:15 ` David Woodhouse
2 siblings, 1 reply; 5+ messages in thread
From: Joe Perches @ 2007-12-17 19:40 UTC (permalink / raw)
To: linux-kernel
Cc: Pavel Roskin, David Gibson, orinoco-devel, Yi Zhu,
Jaroslav Kysela, linuxppc-dev, netdev, Paul Mackerras,
Peter De Shrijver, Rastapur Santosh, bonding-devel,
Andy Gospodarek, Amit S. Kale, ipw2100-devel, ipw3945-devel,
libertas-dev, Dan Williams, Jesse Brandeburg, Manish Lachwani,
Jean Tourrilhes, Jeff Kirsher, Arnaldo Carvalho de Melo,
Francois Romieu, Daniel Drake, Li Yang, Jeff Garzik, Jeb Cramer,
Chad Tindel, orinoco-users, Jay Cliburn, Samuel Ortiz,
Sivakumar Subramani, Jesse Huang, Mike Phillips, rt2400-devel,
Ulrich Kunitz, Chris Snook, cbe-oss-dev, Alexander Indenbaum,
Adam Fritzler, Auke Kok, Stefano Brivio, Haavard Skinnemoen,
tulip-users, linux-ppp, Ramkrishna Vepa, linux-wireless,
Corey Thomas, Sreenivasa Honnur, e1000-devel, John Ronciak,
atl1-devel, Ron Mercer, James Ketrenos, Andrew Morton,
Sorbica Shieh, Larry Finger
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/82596.c | 2 +-
drivers/net/amd8111e.c | 8 ++++----
drivers/net/amd8111e.h | 2 +-
drivers/net/appletalk/ltpc.c | 2 +-
drivers/net/atl1/atl1_hw.c | 2 +-
drivers/net/atl1/atl1_main.c | 2 +-
drivers/net/bonding/bond_3ad.c | 4 ++--
drivers/net/chelsio/sge.c | 2 +-
drivers/net/chelsio/subr.c | 2 +-
drivers/net/cxgb3/t3_hw.c | 2 +-
drivers/net/e1000/e1000_hw.c | 4 ++--
drivers/net/e1000/e1000_hw.h | 2 +-
drivers/net/e1000/e1000_main.c | 2 +-
drivers/net/e1000e/netdev.c | 2 +-
drivers/net/eepro.c | 2 +-
drivers/net/ehea/ehea.h | 2 +-
drivers/net/forcedeth.c | 2 +-
drivers/net/hamachi.c | 4 ++--
drivers/net/hp100.c | 2 +-
drivers/net/hp100.h | 4 ++--
drivers/net/ibm_emac/ibm_emac.h | 2 +-
drivers/net/ibm_newemac/emac.h | 2 +-
drivers/net/ibmlana.c | 2 +-
drivers/net/ibmlana.h | 2 +-
drivers/net/ipg.c | 4 ++--
drivers/net/irda/ali-ircc.c | 6 +++---
drivers/net/irda/ali-ircc.h | 4 ++--
drivers/net/irda/donauboe.h | 2 +-
drivers/net/irda/irport.c | 4 ++--
drivers/net/irda/nsc-ircc.h | 4 ++--
drivers/net/irda/smsc-ircc2.c | 4 ++--
drivers/net/irda/via-ircc.h | 4 ++--
drivers/net/ixgbe/ixgbe_common.c | 4 ++--
drivers/net/ixgbe/ixgbe_main.c | 2 +-
drivers/net/lasi_82596.c | 2 +-
drivers/net/lib82596.c | 2 +-
drivers/net/macb.c | 2 +-
drivers/net/meth.h | 2 +-
drivers/net/mv643xx_eth.c | 4 ++--
drivers/net/netxen/netxen_nic_hw.h | 2 +-
drivers/net/ppp_generic.c | 2 +-
drivers/net/ps3_gelic_net.c | 2 +-
drivers/net/qla3xxx.c | 2 +-
drivers/net/s2io.h | 2 +-
drivers/net/sis190.c | 2 +-
drivers/net/sk98lin/skgepnmi.c | 2 +-
drivers/net/sk98lin/skxmac2.c | 4 ++--
drivers/net/skfp/ess.c | 2 +-
drivers/net/skfp/fplustm.c | 6 +++---
drivers/net/skfp/h/fplustm.h | 4 ++--
drivers/net/skfp/h/smt.h | 2 +-
drivers/net/skfp/h/supern_2.h | 2 +-
drivers/net/smc911x.c | 2 +-
drivers/net/spider_net.c | 2 +-
drivers/net/sunbmac.h | 2 +-
drivers/net/sungem.c | 2 +-
drivers/net/sunhme.h | 2 +-
drivers/net/tc35815.c | 4 ++--
drivers/net/tehuti.c | 2 +-
drivers/net/tehuti.h | 2 +-
drivers/net/tokenring/3c359.c | 2 +-
drivers/net/tokenring/lanstreamer.c | 2 +-
drivers/net/tokenring/olympic.c | 2 +-
drivers/net/tokenring/smctr.c | 6 +++---
drivers/net/tokenring/tms380tr.c | 2 +-
drivers/net/tokenring/tms380tr.h | 2 +-
drivers/net/tulip/xircom_cb.c | 2 +-
drivers/net/tun.c | 4 ++--
drivers/net/ucc_geth_ethtool.c | 2 +-
drivers/net/ucc_geth_mii.c | 6 +++---
drivers/net/wan/cycx_drv.c | 4 ++--
drivers/net/wan/sbni.c | 2 +-
drivers/net/wireless/atmel.c | 2 +-
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h | 2 +-
drivers/net/wireless/ipw2200.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +-
drivers/net/wireless/libertas/cmd.c | 4 ++--
drivers/net/wireless/libertas/scan.c | 4 ++--
drivers/net/wireless/netwave_cs.c | 2 +-
drivers/net/wireless/orinoco.h | 2 +-
drivers/net/wireless/ray_cs.c | 2 +-
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +-
drivers/net/wireless/rt2x00/rt2x00usb.h | 6 +++---
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/wavelan_cs.c | 2 +-
drivers/net/wireless/zd1211rw/zd_chip.h | 4 ++--
drivers/net/yellowfin.c | 2 +-
87 files changed, 120 insertions(+), 120 deletions(-)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 2797da7..d999b63 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index e7fdd81..5cefe92 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1283,7 +1283,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
#ifdef CONFIG_AMD8111E_NAPI
if(intr0 & RINT0){
if(netif_rx_schedule_prep(dev, &lp->napi)){
- /* Disable receive interupts */
+ /* Disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
__netif_rx_schedule(dev, &lp->napi);
@@ -1493,7 +1493,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
/*
-This function sets promiscuos mode, all-multi mode or the multicast address
+This function sets promiscuous mode, all-multi mode or the multicast address
list to the device.
*/
static void amd8111e_set_multicast_list(struct net_device *dev)
@@ -1522,7 +1522,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
lp->mc_list = NULL;
lp->options &= ~OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
- /* disable promiscous mode */
+ /* disable promiscuous mode */
writel(PROM, lp->mmio + CMD2);
return;
}
@@ -2016,7 +2016,7 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
for(i = 0; i < ETH_ADDR_LEN; i++)
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
- /* Setting user defined parametrs */
+ /* Setting user defined parameters */
lp->ext_phy_option = speed_duplex[card_idx];
if(coalesce[card_idx])
lp->options |= OPTION_INTR_COAL_ENABLE;
diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h
index 28c60a7..7d288de 100644
--- a/drivers/net/amd8111e.h
+++ b/drivers/net/amd8111e.h
@@ -614,7 +614,7 @@ typedef enum {
#define CSTATE 1
#define SSTATE 2
-/* Assume contoller gets data 10 times the maximum processing time */
+/* Assume controller gets data 10 times the maximum processing time */
#define REPEAT_CNT 10
/* amd8111e decriptor flag definitions */
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 6ab2c2d..86a9496 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1233,7 +1233,7 @@ static int __init ltpc_setup(char *str)
if (ints[0] > 2) {
dma = ints[3];
}
- /* ignore any other paramters */
+ /* ignore any other parameters */
}
return 1;
}
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 9d3bd22..82359f7 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -645,7 +645,7 @@ s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 35b0a7d..7599163 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -575,7 +575,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter)
return ATL1_SUCCESS;
}
- /* change orignal link status */
+ /* change original link status */
if (netif_carrier_ok(netdev)) {
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index cb3c6fa..96f0f24 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -869,7 +869,7 @@ static int ad_lacpdu_send(struct port *port)
lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
lacpdu_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback lacpdus in receive. */
lacpdu_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
lacpdu_header->ad_header.length_type = PKT_TYPE_LACPDU;
@@ -912,7 +912,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
marker_header = (struct bond_marker_header *)skb_put(skb, length);
marker_header->ad_header.destination_address = lacpdu_multicast_address;
- /* Note: source addres is set to be the member's PERMANENT address, because we use it
+ /* Note: source address is set to be the member's PERMANENT address, because we use it
to identify loopback MARKERs in receive. */
marker_header->ad_header.source_address = *((struct mac_addr *)(slave->perm_hwaddr));
marker_header->ad_header.length_type = PKT_TYPE_LACPDU;
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index b301c04..ed17cd9 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -248,7 +248,7 @@ static void restart_sched(unsigned long);
*
* Interrupts are handled by a single CPU and it is likely that on a MP system
* the application is migrated to another CPU. In that scenario, we try to
- * seperate the RX(in irq context) and TX state in order to decrease memory
+ * separate the RX(in irq context) and TX state in order to decrease memory
* contention.
*/
struct sge {
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index dc50151..7c95578 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -559,7 +559,7 @@ struct chelsio_vpd_t {
#define EEPROM_MAX_POLL 4
/*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 522834c..2882e36 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -534,7 +534,7 @@ struct t3_vpd {
*
* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
* VPD ROM capability. A zero is written to the flag bit when the
- * addres is written to the control register. The hardware device will
+ * address is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 7c6888c..fd7e6a8 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -803,7 +803,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw)
E1000_WRITE_REG(hw, CTRL, reg_ctrl);
break;
case e1000_80003es2lan:
- /* improve small packet performace for fiber/serdes */
+ /* improve small packet performance for fiber/serdes */
if ((hw->media_type == e1000_media_type_fiber) ||
(hw->media_type == e1000_media_type_internal_serdes)) {
reg_tarc0 &= ~(1 << 20);
@@ -5001,7 +5001,7 @@ e1000_read_eeprom(struct e1000_hw *hw,
return -E1000_ERR_EEPROM;
}
- /* Eerd register EEPROM access requires no eeprom aquire/release */
+ /* Eerd register EEPROM access requires no eeprom acquire/release */
if (eeprom->use_eerd == TRUE)
return e1000_read_eeprom_eerd(hw, offset, words, data);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index a2a86c5..e40e515 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1068,7 +1068,7 @@ struct e1000_ffvt_entry {
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4f37506..24a2fc1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -235,7 +235,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4fd2e23..febe157 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4109,7 +4109,7 @@ static struct pci_driver e1000_driver = {
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
- /* Power Managment Hooks */
+ /* Power Management Hooks */
.suspend = e1000_suspend,
.resume = e1000_resume,
#endif
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 83bda6c..d3789c5 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1764,7 +1764,7 @@ module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
module_param_array(mem, int, NULL, 0);
module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 5f82a46..a50b238 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -251,7 +251,7 @@ struct ehea_qp_init_attr {
};
/*
- * Event Queue attributes, passed as paramter
+ * Event Queue attributes, passed as parameter
*/
struct ehea_eq_attr {
u32 type;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index a96583c..7119332 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -490,7 +490,7 @@ union ring_type {
#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
#define NV_RX3_VLAN_TAG_MASK (0x0000FFFF)
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index ed407c8..683b289 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -86,7 +86,7 @@ static int force32;
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
/* The Hamachi chipset supports 3 parameters each for Rx and Tx
- * interruput management. Parameters will be loaded as specified into
+ * interrupt management. Parameters will be loaded as specified into
* the TxIntControl and RxIntControl registers.
*
* The registers are arranged as follows:
@@ -811,7 +811,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return readb(ioaddr + EEData);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 49421d1..8b90d64 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2643,7 +2643,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin)
} else {
hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2);
/* For ETR parts we need to reset the prom. bit in the training
- * register, otherwise promiscious mode won't be disabled.
+ * register, otherwise promiscuous mode won't be disabled.
*/
if (lp->chip == HP100_CHIPID_LASSEN) {
hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST);
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128..e74e45d 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -476,7 +476,7 @@
#define HP100_MACRQ_REPEATER 0x0001 /* 1: MAC tells HUB it wants to be
* a cascaded repeater
* 0: ... wants to be a DTE */
-#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscious mode
+#define HP100_MACRQ_PROMSC 0x0006 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
@@ -488,7 +488,7 @@
#define HP100_CARD_MACVER 0xe000 /* R: 3 bit Cards 100VG MAC version */
#define HP100_MALLOW_REPEATER 0x0001 /* If reset, requested access as an
* end node is allowed */
-#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscious mode
+#define HP100_MALLOW_PROMSC 0x0004 /* 2 bits: Promiscuous mode
* 00: Rcv only unicast packets
* specifically addr to this
* endnode
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 97ed22b..655be50 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_emac/ibm_emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 91cb096..49a540a 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -1,7 +1,7 @@
/*
* drivers/net/ibm_newemac/emac.h
*
- * Register definitions for PowerPC 4xx on-chip ethernet contoller
+ * Register definitions for PowerPC 4xx on-chip ethernet controller
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 91d83ac..5a9b6fa 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL))
rcrval |= RCREG_AMC;
- /* promiscous mode ? */
+ /* promiscuous mode ? */
if (dev->flags & IFF_PROMISC)
rcrval |= RCREG_PRO;
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbd..654af95 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */
#define RCREG_RNT 0x4000 /* accept packets that are < 64 */
#define RCREG_BRD 0x2000 /* accept broadcasts */
-#define RCREG_PRO 0x1000 /* promiscous mode */
+#define RCREG_PRO 0x1000 /* promiscuous mode */
#define RCREG_AMC 0x0800 /* accept all multicasts */
#define RCREG_LB_NONE 0x0000 /* no loopback */
#define RCREG_LB_MAC 0x0200 /* MAC loopback */
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dbd23bb..27d12eb 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -209,7 +209,7 @@ static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
@@ -300,7 +300,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
- * The GMII mangement frame structure for a read is as follows:
+ * The GMII management frame structure for a read is as follows:
*
* |Preamble|st|op|phyad|regad|ta| data |idle|
* |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 9f58452..94140f7 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -977,7 +977,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
/* Install FIR xmit handler*/
dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
- /* Enable Interuupt */
+ /* Enable Interrupt */
self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
/* Be ready for incomming frames */
@@ -1096,7 +1096,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
@@ -1359,7 +1359,7 @@ static int ali_ircc_net_open(struct net_device *dev)
return -EAGAIN;
}
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RDI , iobase+UART_IER);
/* Ready to play! */
diff --git a/drivers/net/irda/ali-ircc.h b/drivers/net/irda/ali-ircc.h
index e489c66..0787657 100644
--- a/drivers/net/irda/ali-ircc.h
+++ b/drivers/net/irda/ali-ircc.h
@@ -173,13 +173,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 1e67720..9db3cce 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
* or the type-DO IR port.
*
* IrDA chip set list from Toshiba Computer Engineering Corp.
- * model method maker controler Version
+ * model method maker controller Version
* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
index c79caa5..2b2a955 100644
--- a/drivers/net/irda/irport.c
+++ b/drivers/net/irda/irport.c
@@ -276,7 +276,7 @@ static void irport_start(struct irport_cb *self)
outb(UART_LCR_WLEN8, iobase+UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, iobase+UART_IER);
}
@@ -352,7 +352,7 @@ static void irport_change_speed(void *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
/* This will generate a fatal interrupt storm.
* People calling us will do that properly - Jean II */
//outb(/*UART_IER_RLSI|*/UART_IER_RDI/*|UART_IER_THRI*/, iobase+UART_IER);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index bbdc97f..29398a4 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -231,13 +231,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 7e7b582..7fd9a48 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1165,7 +1165,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed)
outb(lcr, iobase + UART_LCR); /* Set 8N1 */
outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed);
@@ -1930,7 +1930,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self)
outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR);
- /* Turn on interrups */
+ /* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__);
diff --git a/drivers/net/irda/via-ircc.h b/drivers/net/irda/via-ircc.h
index 204b1b3..9d012f0 100644
--- a/drivers/net/irda/via-ircc.h
+++ b/drivers/net/irda/via-ircc.h
@@ -54,13 +54,13 @@ struct st_fifo {
struct frame_cb {
void *start; /* Start of frame in DMA mem */
- int len; /* Lenght of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
};
struct tx_fifo {
struct frame_cb queue[MAX_TX_WINDOW + 2]; /* Info about frames in queue */
int ptr; /* Currently being sent */
- int len; /* Lenght of queue */
+ int len; /* Length of queue */
int free; /* Next free slot */
void *tail; /* Next free start in DMA mem */
};
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 512e3b2..4b6359e 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -716,7 +716,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -1066,7 +1066,7 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
* @mask: Mask to specify wich semaphore to acquire
*
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 00bc525..25a9cc2 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -592,7 +592,7 @@ quit_polling:
* ixgbe_setup_msix - Initialize MSI-X interrupts
*
* ixgbe_setup_msix allocates MSI-X vectors and requests
- * interrutps from the kernel.
+ * interrupts from the kernel.
**/
static int ixgbe_setup_msix(struct ixgbe_adapter *adapter)
{
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index efbae4b..1ba38c2 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index b59f442..c335d31 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 047ea7b..1367178 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -239,7 +239,7 @@ static int macb_mii_init(struct macb *bp)
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus.name = "MACB_mii_bus",
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1c..ecd0e97 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -127,7 +127,7 @@ typedef struct rx_packet {
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
-#define METH_PROMISC 0x60 /* 11: Promiscious mode */
+#define METH_PROMISC 0x60 /* 11: Promiscuous mode */
#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 651c269..c263c91 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -535,7 +535,7 @@ struct mv643xx_private {
int rx_resource_err; /* Rx ring resource error flag */
- /* Tx/Rx rings managment indexes fields. For driver use */
+ /* Tx/Rx rings management indexes fields. For driver use */
/* Next available and first returning Rx resource */
int rx_curr_desc_q, rx_used_desc_q;
@@ -757,7 +757,7 @@ static void mv643xx_eth_update_mac_address(struct net_device *dev)
/*
* mv643xx_eth_set_rx_mode
*
- * Change from promiscuos to regular rx mode
+ * Change from promiscuous to regular rx mode
*
* Input : pointer to ethernet interface network device structure
* Output : N/A
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h
index 245bf13..236160a 100644
--- a/drivers/net/netxen/netxen_nic_hw.h
+++ b/drivers/net/netxen/netxen_nic_hw.h
@@ -429,7 +429,7 @@ typedef enum {
#define netxen_get_niu_enable_ge(config_word) \
_netxen_crb_get_bit(config_word, 1)
-/* Promiscous mode options (GbE mode only) */
+/* Promiscuous mode options (GbE mode only) */
typedef enum {
NETXEN_NIU_PROMISC_MODE = 0,
NETXEN_NIU_NON_PROMISC_MODE
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 4f69037..9e1890f 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2368,7 +2368,7 @@ find_compressor(int type)
}
/*
- * Miscelleneous stuff.
+ * Miscellaneous stuff.
*/
static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 0a42bf5..5efc5b4 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1271,7 +1271,7 @@ static struct ethtool_ops gelic_net_ethtool_ops = {
/**
* gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
* function (to be called not under interrupt status)
- * @work: work is context of tx timout task
+ * @work: work is context of tx timeout task
*
* called as task when tx hangs, resets interface (if interface is up)
*/
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index a579111..da85b7f 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3691,7 +3691,7 @@ static int ql_adapter_up(struct ql3_adapter *qdev)
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index cc1797a..63d45d4 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -740,7 +740,7 @@ struct mac_info {
u16 mc_pause_threshold_q0q3;
u16 mc_pause_threshold_q4q7;
- void *stats_mem; /* orignal pointer to allocated mem */
+ void *stats_mem; /* original pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
struct stat_block *stats_info; /* Logical address of the stat block */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7200883..ff559e4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -102,7 +102,7 @@ enum sis190_registers {
IntrStatus = 0x20,
IntrMask = 0x24,
IntrControl = 0x28,
- IntrTimer = 0x2c, // unused (Interupt Timer)
+ IntrTimer = 0x2c, // unused (Interrupt Timer)
PMControl = 0x30, // unused (Power Mgmt Control/Status)
rsv2 = 0x34, // reserved
ROMControl = 0x38,
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
index b36dd9a..c761ff7 100644
--- a/drivers/net/sk98lin/skgepnmi.c
+++ b/drivers/net/sk98lin/skgepnmi.c
@@ -356,7 +356,7 @@ int Level) /* Initialization level */
unsigned int PortMax; /* Number of ports */
unsigned int PortIndex; /* Current port index in loop */
SK_U16 Val16; /* Multiple purpose 16 bit variable */
- SK_U8 Val8; /* Mulitple purpose 8 bit variable */
+ SK_U8 Val8; /* Multiple purpose 8 bit variable */
SK_EVPARA EventParam; /* Event struct for timer event */
SK_PNMI_VCT *pVctBackupData;
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index b4e7502..3994289 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -3891,7 +3891,7 @@ int SkXmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
@@ -4036,7 +4036,7 @@ int SkGmOverflowStatus(
SK_AC *pAC, /* adapter context */
SK_IOC IoC, /* IO context */
unsigned int Port, /* Port Index (MAC_1 + n) */
-SK_U16 IStatus, /* Interupt Status from MAC */
+SK_U16 IStatus, /* Interrupt Status from MAC */
SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */
{
SK_U64 Status; /* Overflow status */
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 62b0132..889f987 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -598,7 +598,7 @@ static void ess_send_alc_req(struct s_smc *smc)
req->cmd.sba_cmd = REQUEST_ALLOCATION ;
/*
- * set the parameter type and parameter lenght of all used
+ * set the parameter type and parameter length of all used
* parameters
*/
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index a45205d..b27a895 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -398,7 +398,7 @@ static void copy_tx_mac(struct s_smc *smc, u_long td, struct fddi_mac *mac,
/* u_long td; transmit descriptor */
/* struct fddi_mac *mac; mac frame pointer */
/* unsigned off; start address within buffer memory */
-/* int len ; lenght of the frame including the FC */
+/* int len ; length of the frame including the FC */
{
int i ;
u_int *p ;
@@ -1262,8 +1262,8 @@ Function DOWNCALL/INTERN (SMT, fplustm.c)
Para mode = 1 RX_ENABLE_ALLMULTI enable all multicasts
2 RX_DISABLE_ALLMULTI disable "enable all multicasts"
- 3 RX_ENABLE_PROMISC enable promiscous
- 4 RX_DISABLE_PROMISC disable promiscous
+ 3 RX_ENABLE_PROMISC enable promiscuous
+ 4 RX_DISABLE_PROMISC disable promiscuous
5 RX_ENABLE_NSA enable reception of NSA frames
6 RX_DISABLE_NSA disable reception of NSA frames
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 98bbf65..586f055 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
*/
#define RX_ENABLE_ALLMULTI 1 /* enable all multicasts */
#define RX_DISABLE_ALLMULTI 2 /* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC 3 /* enable promiscous */
-#define RX_DISABLE_PROMISC 4 /* disable promiscous */
+#define RX_ENABLE_PROMISC 3 /* enable promiscuous */
+#define RX_DISABLE_PROMISC 4 /* disable promiscuous */
#define RX_ENABLE_NSA 5 /* enable reception of NSA frames */
#define RX_DISABLE_NSA 6 /* disable reception of NSA frames */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 1ff5899..2976757 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -413,7 +413,7 @@ struct smt_p_reason {
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
-#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
+#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
#define SMT_RDF_RANGE 0x8 /* out of range */
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
#define SMT_RDF_LENGTH 0x0a /* length error */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b83..1074f96 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -386,7 +386,7 @@ struct tx_queue {
#define FM_MDISRCV (4<<8) /* disable receive function */
#define FM_MRES0 (5<<8) /* reserve */
#define FM_MLIMPROM (6<<8) /* limited-promiscuous mode */
-#define FM_MPROMISCOUS (7<<8) /* address detection : promiscous */
+#define FM_MPROMISCOUS (7<<8) /* address detection : promiscuous */
#define FM_SELSA 0x0800 /* select-short-address bit */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 76cc1d3..648b904 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -466,7 +466,7 @@ static inline void smc911x_rcv(struct net_device *dev)
/* Align IP header to 32 bits
* Note that the device is configured to add a 2
* byte padding to the packet start, so we really
- * want to write to the orignal data pointer */
+ * want to write to the original data pointer */
data = skb->data;
skb_reserve(skb, 2);
skb_put(skb,pkt_len-4);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index bccae7e..7a7f5cd 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1826,7 +1826,7 @@ spider_net_enable_card(struct spider_net_card *card)
spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
- /* set chain tail adress for RX chains and
+ /* set chain tail address for RX chains and
* enable DMA */
spider_net_enable_rxchtails(card);
spider_net_enable_rxdmac(card);
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index b563d3c..681442b 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_FIFO 0x0000000e /* Default rx fthresh... */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_ME 0x00000200 /* Receive packets addressed to me */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 6887214..097a065 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -780,7 +780,7 @@ static int gem_rx(struct gem *gp, int work_to_do)
break;
/* When writing back RX descriptor, GEM writes status
- * then buffer address, possibly in seperate transactions.
+ * then buffer address, possibly in separate transactions.
* If we don't wait for the chip to write both, we could
* post a new buffer to this descriptor then have GEM spam
* on the buffer address. We sync on the RX completion
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 90f446d..68bf4e1 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
/* BigMac receive config register. */
#define BIGMAC_RXCFG_ENABLE 0x00000001 /* Enable the receiver */
#define BIGMAC_RXCFG_PSTRIP 0x00000020 /* Pad byte strip enable */
-#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscous mode */
+#define BIGMAC_RXCFG_PMISC 0x00000040 /* Enable promiscuous mode */
#define BIGMAC_RXCFG_DERR 0x00000080 /* Disable error checking */
#define BIGMAC_RXCFG_DCRCS 0x00000100 /* Disable CRC stripping */
#define BIGMAC_RXCFG_REJME 0x00000200 /* Reject packets addressed to me */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d887c05..0fbf96d 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -136,7 +136,7 @@ struct tc35815_regs {
#define DMA_RxAlign_2 0x00800000
#define DMA_RxAlign_3 0x00c00000
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_IntMask 0x00040000 /* 1:Interrupt mask */
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
@@ -281,7 +281,7 @@ struct tc35815_regs {
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Suppress */
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 21230c9..3ed1973 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -276,7 +276,7 @@ static irqreturn_t bdx_isr_napi(int irq, void *dev)
* currently intrs are disabled (since we read ISR),
* and we have failed to register next poll.
* so we read the regs to trigger chip
- * and allow further interupts. */
+ * and allow further interrupts. */
READ_REG(priv, regTXF_WPTR_0);
READ_REG(priv, regRXD_WPTR_0);
}
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index efd170f..992efa6 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -510,7 +510,7 @@ struct txd_desc {
#define GMAC_RX_FILTER_ACRC 0x0010 /* accept crc error */
#define GMAC_RX_FILTER_AM 0x0008 /* accept multicast */
#define GMAC_RX_FILTER_AB 0x0004 /* accept broadcast */
-#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscous mode */
+#define GMAC_RX_FILTER_PRM 0x0001 /* [0:1] promiscuous mode */
#define MAX_FRAME_AB_VAL 0x3fff /* 13:0 */
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 5d31519..9d7a0c9 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -75,7 +75,7 @@ static char version[] __devinitdata =
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd..21c4f3c 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -170,7 +170,7 @@ static char *open_min_error[] = {
"Monitor Contention failer for RPL", "FDX Protocol Error"
};
-/* Module paramters */
+/* Module parameters */
/* Ring Speed 0,4,16
* 0 = Autosense
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 74c1f0f..b1178f1 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
"Reserved", "Reserved", "No Monitor Detected for RPL",
"Monitor Contention failer for RPL", "FDX Protocol Error"};
-/* Module paramters */
+/* Module parameters */
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 93da3a3..4238a61 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -2426,7 +2426,7 @@ static irqreturn_t smctr_interrupt(int irq, void *dev_id)
break ;
/* Type 0x0E - TRC Initialization Sequence Interrupt
- * Subtype -- 00-FF Initializatin sequence complete
+ * Subtype -- 00-FF Initialization sequence complete
*/
case ISB_IMC_TRC_INTRNL_TST_STATUS:
tp->status = INITIALIZED;
@@ -3055,8 +3055,8 @@ static int smctr_load_node_addr(struct net_device *dev)
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
* run, and then the receive mask set back to its original value if the test
* is successful.
*/
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index d5fa36d..b15435d 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -48,7 +48,7 @@
* 25-Sep-99 AF Uped TPL_NUM from 3 to 9
* Removed extraneous 'No free TPL'
* 22-Dec-99 AF Added Madge PCI Mk2 support and generalized
- * parts of the initilization procedure.
+ * parts of the initialization procedure.
* 30-Dec-99 AF Turned tms380tr into a library ala 8390.
* Madge support is provided in the abyss module
* Generic PCI support is in the tmspci module.
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 7daf74e..1cbb8b8 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -441,7 +441,7 @@ typedef struct {
#define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer
* of each received frame; FrameSize
* of RPLs must contain internal
- * BUFFER_SIZE bits for promiscous mode.
+ * BUFFER_SIZE bits for promiscuous mode.
*/
#define ENABLE_FULL_DUPLEX_SELECTION 0x2000
/* Enable the use of full-duplex
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 70befe3..5dad012 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -646,7 +646,7 @@ static void setup_descriptors(struct xircom_private *card)
}
wmb();
- /* wite the transmit descriptor ring to the card */
+ /* write the transmit descriptor ring to the card */
address = (unsigned long) card->tx_dma_handle;
val =cpu_to_le32(address);
outl(val, card->io_port + CSR4); /* xmit descr list address */
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 1f76446..fc9eada 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -142,7 +142,7 @@ add_multi(u32* filter, const u8* addr)
filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
}
-/** Remove the specified Ethernet addres from this multicast filter. */
+/** Remove the specified Ethernet address from this multicast filter. */
static void
del_multi(u32* filter, const u8* addr)
{
@@ -399,7 +399,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
* - the packet is addressed to us.
* - the packet is broadcast.
* - the packet is multicast and
- * - we are multicast promiscous.
+ * - we are multicast promiscuous.
* - we belong to the multicast group.
*/
skb_copy_from_linear_data(skb, addr, min_t(size_t, sizeof addr,
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 9a9622c..f8d319b 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -7,7 +7,7 @@
*
* Limitation:
* Can only get/set setttings of the first queue.
- * Need to re-open the interface manually after changing some paramters.
+ * Need to re-open the interface manually after changing some parameters.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..7c0d4a8 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -63,11 +63,11 @@ int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
- /* Setting up the MII Mangement Control Register with the value */
+ /* Setting up the MII Management Control Register with the value */
out_be32(®s->miimcon, value);
/* Wait till MII management write is complete */
@@ -85,7 +85,7 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
u16 value;
- /* Setting up the MII Mangement Address Register */
+ /* Setting up the MII Management Address Register */
out_be32(®s->miimadd,
(mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index d347d59..d14e667 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -322,7 +322,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
@@ -353,7 +353,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
u32 i;
- /* boot buffer lenght */
+ /* boot buffer length */
writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
writew(GEN_DEFPAR, pt_boot_cmd);
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 2e8b5c2..74f87df 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1472,7 +1472,7 @@ sbni_get_stats( struct net_device *dev )
static void
set_multicast_list( struct net_device *dev )
{
- return; /* sbni always operate in promiscuos mode */
+ return; /* sbni always operate in promiscuous mode */
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 059ce3f..60dfdd9 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3278,7 +3278,7 @@ static void atmel_smooth_qual(struct atmel_private *priv)
priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
}
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
static void atmel_management_frame(struct atmel_private *priv,
struct ieee80211_hdr_4addr *header,
u16 frame_len, u8 rssi)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
index a40d1af..edf7d8f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.h
@@ -28,7 +28,7 @@ struct bcm43xx_dfsentry {
struct bcm43xx_xmitstatus *xmitstatus_buffer;
int xmitstatus_ptr;
int xmitstatus_cnt;
- /* We need a seperate buffer while printing to avoid
+ /* We need a separate buffer while printing to avoid
* concurrency issues. (New xmitstatus can arrive
* while we are printing).
*/
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 54f44e5..e24382f 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1144,7 +1144,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
*
* See the level definitions in ipw for details.
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 891f90d..e242647 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4051,7 +4051,7 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv,
agg->wait_for_ba = 0;
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
- if (sh < 0) /* tbw something is wrong with indeces */
+ if (sh < 0) /* tbw something is wrong with indices */
sh += 0x100;
/* don't use 64 bits for now */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index be5cfd8..31ee4f6 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1120,7 +1120,7 @@ int libertas_set_mac_packet_filter(wlan_private * priv)
* @param cmd_action command action: GET or SET
* @param wait_option wait option: wait response or not
* @param cmd_oid cmd oid: treated as sub command
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
int libertas_prepare_and_send_command(wlan_private * priv,
@@ -1606,7 +1606,7 @@ static void cleanup_cmdnode(struct cmd_ctrl_node *ptempnode)
* @param ptempnode A pointer to cmd_ctrl_node structure
* @param cmd_oid cmd oid: treated as sub command
* @param wait_option wait option: wait response or not
- * @param pdata_buf A pointer to informaion buffer
+ * @param pdata_buf A pointer to information buffer
* @return 0 or -1
*/
void libertas_set_cmd_ctrl_node(wlan_private * priv,
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index ad1e67d..537b36c 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -443,7 +443,7 @@ wlan_scan_setup_scan_config(wlan_private * priv,
ptlvpos = pscancfgout->tlvbuffer;
/*
- * Set the initial scan paramters for progressive scanning. If a specific
+ * Set the initial scan parameters for progressive scanning. If a specific
* BSSID or SSID is used, the number of channels in the scan command
* will be increased to the absolute maximum
*/
@@ -1679,7 +1679,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
*
* Called from libertas_prepare_and_send_command() in cmd.c
*
- * Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ * Sends a fixed length data part (specifying the BSS type and BSSID filters)
* as well as a variable number/length of TLVs to the firmware.
*
* @param priv A pointer to wlan_private structure
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index d2fa079..c4b649e 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -1408,7 +1408,7 @@ static void set_multicast_list(struct net_device *dev)
/* Multicast Mode */
rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
} else if (dev->flags & IFF_PROMISC) {
- /* Promiscous mode */
+ /* Promiscuous mode */
rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
} else {
/* Normal mode */
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
index 4720fb2..703a4cf 100644
--- a/drivers/net/wireless/orinoco.h
+++ b/drivers/net/wireless/orinoco.h
@@ -108,7 +108,7 @@ struct orinoco_private {
int scan_inprogress; /* Scan pending... */
u32 scan_mode; /* Type of scan done */
char * scan_result; /* Result of previous scan */
- int scan_len; /* Lenght of result */
+ int scan_len; /* Length of result */
};
#ifdef ORINOCO_DEBUG
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index f87fe10..24f9066 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -129,7 +129,7 @@ static void ray_reset(struct net_device *dev);
static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
static void verify_dl_startup(u_long);
-/* Prototypes for interrpt time functions **********************************/
+/* Prototypes for interrupt time functions **********************************/
static irqreturn_t ray_interrupt (int reg, void *dev_id);
static void clear_interrupt(ray_dev_t *local);
static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..fe9011d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -230,7 +230,7 @@ static inline u8 rt2x00_get_field8(const u8 reg,
* corresponds with the TX register format for the current device.
* 4 - plcp, 802.11b rates are device specific,
* 802.11g rates are set according to the ieee802.11a-1999 p.14.
- * The bit to enable preamble is set in a seperate define.
+ * The bit to enable preamble is set in a separate define.
*/
#define DEV_RATE FIELD32(0x000007ff)
#define DEV_PREAMBLE FIELD32(0x00000800)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 2681abe..b76881f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -135,13 +135,13 @@ static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev
* kmalloc for correct handling inside the kernel USB layer.
*/
static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev,
- __le16 *eeprom, const u16 lenght)
+ __le16 *eeprom, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
USB_VENDOR_REQUEST_IN, 0x0000,
- 0x0000, eeprom, lenght, timeout);
+ 0x0000, eeprom, length, timeout);
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index c0671c2..d1468a1 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -833,7 +833,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
/*
* Write firmware to device.
- * We setup a seperate cache for this action,
+ * We setup a separate cache for this action,
* since we are going to write larger chunks of data
* then normally used cache size.
*/
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 577c647..5d28105 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -159,7 +159,7 @@ psa_read(struct net_device * dev,
/*------------------------------------------------------------------*/
/*
- * Write the Paramter Storage Area to the WaveLAN card's memory
+ * Write the Parameter Storage Area to the WaveLAN card's memory
*/
static void
psa_write(struct net_device * dev,
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 8009b70..301315a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -620,8 +620,8 @@ enum {
#define E2P_PWR_INT_GUARD 8
#define E2P_CHANNEL_COUNT 14
-/* If you compare this addresses with the ZYDAS orignal driver, please notify
- * that we use word mapping for the EEPROM.
+/* If you compare these addresses with the ZYDAS original driver,
+ * please notice that we use word mapping for the EEPROM.
*/
/*
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 87f002a..cb6e978 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -533,7 +533,7 @@ static int __devinit read_eeprom(void __iomem *ioaddr, int location)
return ioread8(ioaddr + EERead);
}
-/* MII Managemen Data I/O accesses.
+/* MII Management Data I/O accesses.
These routines assume the MDIO controller is idle, and do not exit until
the command is finished. */
--
1.5.3.7.949.g2221a6
^ permalink raw reply related [flat|nested] 5+ messages in thread